LocklyVision PGH200 Secure Link Wi-Fi Smart Hub User Manual
OVERVIEW
Lockly Secure Link comes in two parts. Each part is crucial to enable voice assistant features and live monitoring and control of your Lockly device. The Wireless Door Sensor is optional but highly recommended as they provide the ability to verify that your door is securely closed and not ajar. You may plug the USB Secure Link into any UL Certified 5V 1A USB outlet, however we recommend using ours for best performance. Power adaptor supplied in this box is based on standard power plug and socket used by country.
Setting up the Lockly Secure Link
You should install the Secure Link after you have successfully finished installation and set up of your Lockly Smart Lock. Refer to your appropriate Lockly Smart Lock Installation Guide and User Manual that came with the lock for reference. Secure Link (Part A) can be plugged into any standard 5V 1A USB port or use the UL certified USB AC adapter included in this box (recommended). For best connectivity, choose an appropriate location for the Secure Link for optimum performance (see below). For optimum connectivity, it is recommended that the hub be no further away from the lock than 30 feet (9 meters)
In order for your Secure Link to connect to the internet, you must have a Wi-Fi network with a radio signal emitting 2.4 GHz. All modern Wi-Fi devices support 2.4 GHz connections while some equipment supports both 2.4 GHz and 5 GHz. Please check with your network administrator or internet provider if you’re unsure what kind of network you have. Proceed to the next page to read how to finish set up of your Secure Link. Plug the Secure Link into the 5V 1A USB AC adapter and plug the AC adapter to your wall socket.
- A GREEN LED indicator light will flashes quickly to indicate that the Secure Link is ready to connect.
Using the Lockly Secure Link
During the setup process position yourself between the lock and the Secure Link—ideally no more than 30 feet (9 meters) apart. Ensure your iOS or Android™ device has both Bluetooth and Wi-Fi enabled.
TIP: Secure Link requires a strong wireless signal for optimal performance. Make sure Secure Link will be installed in a location with a strong 2.4 Ghz wireless signal. Sometimes distances between Secure Link and lock can vary due to circumstances.
Configuring Your Secure Link
- First, make sure the smartphone you are using to add the Secure Link is connected to your 2.4 GHz Wi-Fi Network. Next, open your Lockly App and select the main menu from the upper left corner. (Image shown with iOS demo). Once the menu opens go ahead select “Set up a New Device”
- If your Secure Link is connected to your wireless network, the LED indicator is SOLID GREEN. Otherwise, indicator slowly flashes Red. If you’re setting up the Secure Link, press and hold the setup button for 2 secs until you see the indicator rapidly flashes Green. (Setup button is at the back of the Wi-Fi Hub)
If you don’t see anything appear with a Bluetooth icon and a name starting with PGH230… simply click the Refresh button on the upper right to rescan. Make sure your Secure Link is showing a flashing GREEN LED indicator and the Secure Link is within the optimal distance of 30 feet from your lock. Select the desired Secure Link to continue.
If you are already connected to a 2.4 GHz compatible Wi-Fi network, it should display the network name. (See example below).
If you don’t see anything appear with a Bluetooth icon and a name starting with PGH230… simply click the Refresh button on the upper right to rescan. Make sure your Secure Link is showing a flashing GREEN LED indicator and the Secure Link is within the optimal distance of 30 feet from your lock. Select the desired Secure Link to continue.
If you are already connected to a 2.4 GHz compatible Wi-Fi network, it should display the network name. (See example below).Adding the Door Sensor
Adding the door sensor (Part B) is optional, however we strongly recommend installing the Door Sensor as it provides the ability to verify that your door is securely closed and not ajar and also send push notifications to your phone on the status of your door when someone opens and closes the door. Depending on your door orientation, your Door Sensor will be mounted different ways. The Door Sensor comes in two parts.
Make sure you install the Door Sensor indoors on a clean and dry surface. Gently wipe the surface of your door and door frame where you wish to install the Door Sensor and make sure it’s dry before installing. Door Sensor is required if you are intending to use Amazon Alexa or Hey Google. Keep the Door Sensor away from direct sunlight, high heat locations and large metal objects that may interfere with wireless signals.
When you are installing the Door Sensor, make sure the arrows on the Door Sensor is placed next to the arrow from the Door Frame Sensor.
Install the battery
- Open the door sensor as shown, put in 1 AAA battery, please pay attention to the positive and negative poles of the battery.
- Slide and Lift to remove cover to replace the AAA/LR03 battery.
Pair the Door Sensor
In the Lockly app, go to Settings>Remote Control /Wireless Accessories, select add New Sensor. Lockly continuously optimizes user experience, please operate according to the actual menu on the app. Install the Door Sensor battery according to the prompt on the app interface. The blue light on the Door Sensor will blink for three minutes until it enters the pairing mode. Please press the setup button three times within one second. The blue light of the Door Sensor will on for 2 seconds and then it will stop blinking to enter pairing mode. Place door sensor near the sensor magnet. Once the door sensor detects sensor magnet, it flashes a blue light and pairing is completed. If the pairing is unsuccessful, reinstall the Door Sensor’s battery and re-enter the pairing mode as described above. Mount the Door Sensor and Sensor Magnet once pairing is successful.
