Shark Freestyle FS80982 Bella Smart Watch User Manual

Shark Freestyle FS80982 Bella Smart Watch User Manual

FEATURES:

• 100 meters H2O
• Day/date
• EL backlight
• 10-lap memory chronograph
• Countdown timer
• Alarm
• Dual time

CONTROL BUTTONS

• S1 – Start/lap Button
• S2 – Stop/reset Button
• S3 – Mode Button
• S4 – Light Button

DISPLAY MODES

The watch has five display modes: NORMAL TIME (TIME), CHRONOGRAPH (Chro), RECALL (RCL), ALARM (AL) and TIMER (TMR). The change from one display mode to another, press the S3 button once.

TO SET THE TIME AND CALENDAR

1. Press the S3 button to select NORMAL TIME mode.
2. Press the S1 button to toggle between NORMAL TIME mode and TIME 2 mode to set.
3. Press and hold the S2 button for around 2 seconds, the second digits will blink.
4. Press the S1 button to reset the second digits to 00.
5. Press the S3 button once, and the hour digits will blink.
6. Press S1 to set the hour digits. Holding down the button will speed up the process.
7. Press the S3 button once, and the minute digits will blink.
8. Press the S1 button to set the minute’s digits.
9. Follow the same pattern to set the day (of the week), year, month, date and hour format.
10. To set the hour format, press the S1 button to toggle between the 12-hour and 24-hour format. The P.M. indicator may be displayed to indicate the time period 12:00 A.M. – 11:59 P.M. in a 12-hour format.
11. After finishing making all the settings, press the S2 button to confirm.

NOTE: The chosen hour format will apply to both NORMAL TIME mode and TIME 2 mode. NOTE: In TIME 2 settings, only hours, minutes, day, year, month, and date are open to setting.

TO USE THE CHRONOGRAPH (STOPWATCH)

1. Press the S3 button to select CHRONOGRAPH mode.
2. The chronograph will then be displayed in its current state – reset, running, or stopped.
3. To resume a counting, press the S1 button to resume from where it left off.
4. To start a new counting, reset the chronograph to zero first. Press the S1 button to stop counting, then press the S2 button to reset the counter to zero.

For changing the chronograph display format:
In CHRONOGRAPH mode,

1. Press the S2 button to toggle between SPLIT format and LAP format.
2. If the SPLIT format is selected, the split time (cumulative lap time) will be displayed. If the LAP format is selected, the lap time (individual lap time) will be displayed.

For the measurement of elapsed time:

In CHRONOGRAPH mode,

1. Press the S1 button to start counting.
2. To stop counting, press the S2 button. Press the S1 button to resume from where it left off.
3. To reset to zero, press the S2 button to stop counting, then press the S2 button again to reset the counter to zero.

For the measurement of split time:
In CHRONOGRAPH mode,

1. Press the S1 button to start counting.
2. While the chronograph is running, press the S1 button once to register a lap.
3. Depending on the chronograph display format selected, the cumulative lap time (if SPLIT format is selected) or the individual lap time of the previous lap (if LAP format is selected) will be displayed. After around 5 seconds, the currently accumulated time will be displayed.
4. Repeat the last step until all the laps have been registered.
5. To stop counting, press the S2 button. Press the S1 button to resume from where it left off.
6. To reset to zero, press the S2 button to stop counting, then press the S2 button again to reset the counter to zero.

TO USE THE RECALL FUNCTION

1. Press S3 button to select RECALL mode. The lap record of the previous chronograph counting will be displayed.
2. Press S1 button to cycle the first nine to the last split/lap record.
3. Press S2 button to return to CHRONOGRAPH mode.

TO SET THE ALARM TIME

1.  Press S3 button to select ALARM mode.
2. Press S2 button toggle between HOME ALARM (HOME) and TIME 2 ALARM (T2) to set.
3. Press and hold S2 button for around 2 seconds, the hour digits will blink.
4. Press S1 button to set the hour digits. Holding down the button will speed up the process.
5. Press S3 button once, the minute digits will blink.
6. Press S1 button to set the minute digits.
7. After finishing making all the settings, press S2 button to confirm.

TO TURN ON/OFF THE ALARM AND HOURLY CHIME
In ALARM mode,

1. Press S2 button toggle between HOME ALARM and TIME 2 ALARM to set.
2. Press S1 button once to activate the hourly chime. A chime indicatorwill appear.
3. Press again to activate the alarm. An alarm indicatorwill appear.
4. Press the third time to activate both functions. Both of the indicators will appear.
5. Press the fourth time to deactivate both functions. Both of the indicators will disappear.

TO SET THE TIMER

1. Press S3 button to select TIMER mode.
2. Press and hold S2 button for around 2 seconds, and the hour digits will blink.
3. Press S1 button to set the hour digits. Holding down the button will speed up the process.
4. Press S3 button, the minute digits will blink.
5. Press S1 button to set the minute digits.
6. Press S3 button, the second digits will blink.
7. Press S1 button to set the second digits.
8. After finish making all the settings, press S2 button to confirm.

OTHERS
In any setting procedure, if there is no key manipulation for around 1-2 minutes, the watch will automatically save the entered data and exit the setting procedure.

FOLLOW THESE 8 TIPS TO GET THE MOST OUT OF YOUR NEW WATCH!

1. Never pull out the crown or operate the pushers/buttons underwater.
2. If your watch is exposed to saltwater it is very important to wash it thoroughly under tap water and wipe dry with a soft cloth. Keep it clean!
3. Never try to remove the case back, leave this to a certified watch repair technician or Freestyle service center. This will help in preventing water leakage from improper battery replacement.
4. Severe impacts or drops may affect your watch’s water resistance and performance.
5. Avoid exposing your watch to chemicals, soaps, or solvents as they deteriorate the water-resistant seals in your watch.
6. Make sure your crown is returned to the original position before you expose your watch to water
7. Avoid exposing your Freestyle watch to extreme temperatures such as in a hot shower, Jacuzzi, sauna or hot tub. The combination of extreme heat and water may cause your watch to lose some of its water resistance.
8. 8. It is advisable to have your watch pressure tested annually and to re-furbish your watch every 2-3 years to extend the life of the watch.

LIMITED LIFETIME WARRANTY

Freestyle U.S.A. warrants, to the original purchaser, that its watches are free from defects in materials and workmanship for the lifetime of the watch (under normal use) from the date of original purchase. The following are not covered under warranty: battery, strap/bracelet/ band and crystal.

Accidental breakage or damage due to normal wear or misuse of the product, including but not limited to the mathematical accuracy of the product is not covered under this warranty. Some states do not allow limitations on how long an implied warranty lasts, or the exclusions of or limitations on consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may have other rights, which vary from state to state.

Under this warranty, FREESTYLE will make any necessary repairs, if applicable, at no cost to you the consumer. Any repair needed that is not under warranty will be at the cost of you the consumer. Proof of purchase and/or original receipt is needed to validate your warranty. Your warranty is voided by any servicing out by a non-authorized agent. Any other form of guarantee to you by the retailer is his / her responsibility. This warranty applies to watches purchased in the United States. For watches purchased outside the United States, please contact your authorized FREESTYLE dealer for warranty information.

REFERENCE LINK