Shark Freestyle MINI-CG1216 Waterproof Watch User Manual

Shark Freestyle MINI-CG1216 Waterproof Watch User Manual

• S1. Start/stop Button
• S2. Lap/reset Button
• S3. Mode Button
• S4. Light Button

SPECIAL FEATURE

This SHARK product features unique Hydro Pushers®: these pushers can be pressed underwater to a dynamic water pressure (not water depth) of 3 ATM.

DISPLAY MODES
The watch has four display modes: HOME TIME (TIME) / FOREIGN TIME (TM-2), HOME TIME ALARM (ALM1) / FOREIGN TIME ALARM (ALM2), STOPWATCH (STW) and COUNTDOWN TIMER (TMR). To change from one display mode to another, press the S3 button once. The mode description will appear for 2 seconds before the selected mode is activated.

HOME AND FOREIGN DISPLAY
To display FOREIGN TIME, press the S2 button when HOME TIME is displayed. The mode description (TM-2) will appear shortly before FOREIGN TIME is displayed. To change back to HOME TIME, press the S2 button. To display the FOREIGN TIME ALARM, press the S2 button when the HOME TIME ALARM is displayed. The mode description (ALM 2) will appear shortly before the FOREIGN TIME ALARM is displayed. To change back to HOME TIME ALARM, press the S2 button.

TO SET THE TIME AND CALENDAR

1. Press the S3 button to select time mode.
2. Press the S2 button to toggle between HOME TIME and FOREIGN TIME mode to set.
3. Press and hold the S2 button for 2 seconds until the “SET” message appears and the second digits will blink.
4. Press the S1 button to reset the second digits to 00.
5. Press the S3 button, and the minute digits will blink.
6. Press the S1 button to set the minute digits. Holding down the button speeds up the process.
7. Press the S3 button, and the hour digits will blink.
8. Press the S1 button to set the hour digits.
9. Follow the same pattern to set the date, month, day (of the week), hour format, and calendar format.
10. To set the hour format, press the S1 button to toggle between the 12-hour and 24-hour format. The P.M. indicator may be displayed to indicate the time period 12:00 A.M. – 11:59 P.M. in a 12-hour format.
11. To set the calendar format, press the S1 button to toggle between M-D (month date) and D-M (date-month) format.
12. After finishing making all the settings, press the S2 button to confirm.

NOTE: The chosen hour and calendar formats will apply to both HOME TIME mode and FOREIGN TIME mode. NOTE: In FOREIGN TIME settings, only minutes, hours, date, month, and day are open to setting.

TO DISPLAY THE CALENDAR

1. Press the S3 button to select the time mode
2. Press the S1 button to toggle between the time display and the calendar display. Note: Calendar will be displayed for around 6 seconds before the watch switches back to time display.

TO SET THE ALARM TIME

1. Press the S3 button to select alarm mode.
2. Press the S2 button to toggle between HOME TIME ALARM and FOREIGN TIME ALARM mode to set.
3. Press and hold the S2 button for 2 seconds until the “SET” message appears and the minute digits will blink.
4. Press the S1 button to set the minute digits. Holding down the button will speed up the process.
5. Press the S3 button, and the hour digits will blink.
6. Press the S1 button to set the hour digits.
7. After finishing making all the settings, press the S2 button to confirm.

TO TURN ON/OFF THE ALARM AND HOURLY CHIME

In alarm mode,

1. Press the S2 button to toggle between HOME TIME ALARM and FOREIGN TIME ALARM mode to set.
2. Press the S1 button once to activate the alarm. An alarm indicator will appear.
3. Press again to activate the hourly chime. A chime indicatorwill appear.
4. Press the third time to activate both functions. Both of the indicators will appear.
5. Press the fourth time to deactivate both functions. Both of the indicators will disappear

WHEN AN ALARM OR HOURLY CHIME GOES OFF
A tune will go off by the hour if the hourly chime function is activated. An alarm tune will be emitted for around 20 seconds at the designated time when the alarm is activated. To stop the tune, press any button.

TO USE THE STOPWATCH

1. Press the S3 button to select STOPWATCH mode.
2. The stopwatch will then be displayed in its current state – reset, running, or stopped.
3. To resume a counting, press the S1 button to resume from where it left off.
4. To start a new counting, reset the stopwatch to zero first. Press the S1 button to stop counting, then press the S2 button to reset the counter to zero.

For the measurement of elapsed time:
In STOPWATCH mode,

1. Press the S1 button to start counting.
2. To stop counting, press the S1 button once. Press the S1 button again to resume from where it left off.
3. To reset to zero, press the S1 button to stop counting, then press the S2 button to reset the counter to zero.

For the measurement of split time:
In STOPWATCH mode,

1. Press the S1 button to start counting.
2. While the stopwatch is running, press the S2 button once to register a lap. The stopwatch is still running in the background. To display the currently accumulated time, press the S2 button again.
3. Repeat the last step until all the laps have been registered.
4. To stop counting, press the S1 button once. Press the S1 button again to resume from where it left off.
5. To reset to zero, press the S1 button to stop counting, then press the S2 button to reset the counter to zero.

NOTE: You can leave the stopwatch running while switching over to other operating modes.

TO SET THE TIMER

1. Press the S3 button to select TIMER mode.
2.  Press the S2 button to alter the timer setting among 1, 3, 5, 10, 15, 20, 25, 30, 45, and 60 minutes.

TO USE THE TIMER In TIMER mode,

1. Press the S1 button to start counting.
2. To stop counting, press the S1 button once. Press the S1 button again to resume from where it left off.
   To reload the TIMER, press the S1 button to stop counting and then press the S2 button.
3. After reaching zero in a countdown, a tune will be emitted. To stop the tune, press any button, and the TIMER will reload automatically.

NOTE: You can leave the timer running while switching over to other operating modes.

TO USE THE BACKLIGHT
Press the S4 button to turn on the backlight for around 3 seconds.

REFERENCE LINK

https://www.freestyleusa.com/