Shark Robot Vacuum Cleaner User Manual
WHAT TO EXPECT
As your robot learns your home, you may need to make some small adjustments to optimize performance.
Depending on your home layout, your robot may take several runs to build a complete map.
For a constant state of cleaning, set up a cleaning schedule in the app.
While your robot is cleaning, do not pick it up and move it, or move the charging dock—this could impact the robot’s ability to map your home.
During the first few weeks of use, the dustbin will need to be emptied frequently. Empty debris and dust into the trash. Look between the filter and plastic shield and make sure there is no debris buildup.
Run your robot in well-lit conditions. If you are running your robot at night, make sure to turn on the lights.
Your robot can easily climb over the most common thresholds. However, in some situations, they may present a challenge. Use BotBoundary® strips to block off these areas.
SETUP
- Remove the protective film from the robot and dock.
- Attach side brushes located in the red packaging.
- The power button on the side of the robot must be in the (I) ON position.
Find a permanent location for the dock in a central area with a strong Wi-Fi signal. Remove any objects that are closer than 3 ft. from either side of the dock, or closer than 5 ft. from the front. Place the dock with its back against the wall, and connect the charging cord to the back. The Indicator Light will illuminate green when the dock has power.
Place the robot on the dock to charge for 6 hours. The power button must be in the (I) ON position and the robot must be aligned correctly, with its FRONT side against the dock. When charging begins, the robot will BEEP and the DOCK light will turn BLUE.
Search “SharkClean” in the app store or scan the QR code and download. NOTE: For more information on connecting your robot, see the next page.
OPTIMIZING YOUR HOME FOR CLEANING
Clear cords and remove small objects like toys, clothing, or drapes from floors. Open interior doors in rooms you want your robot to clean.
Use the BotBoundary® strip included in the box to keep your robot out of the areas you would like it to avoid:
- Near power cords or phone chargers.
- In front of thresholds higher than 7/8ths of an inch.
CONNECTING THE SHARKCLEAN™ APP AND ROBOT
- Open the SharkClean app and set up your account.
- Hold down Dock and Clean buttons simultaneously until the Wi-Fi light
on the robot blinks. - Exit the app and open Wi-Fi settings.
- Select your robot (Ex. Shark_ RVXXX) from the menu.
- Exit settings and return to the Shark Clean app.
- Select your home Wi-Fi network and enter your password.
NOTE: Most networks are 2.4GHz. The app will not work on a 5GHz network. - When pairing is complete, the Success screen will appear.
on the robot blinks.
Questions?
Two Easy Steps If You’re Stuck: Have trouble connecting to your robot? Call 1-888-228-5531 for robot support. For additional help, visit:
- sharkclean.com/support
- How-to Videos
- FAQs
- Troubleshooting
- Tips & Tricks
Smart Home Setup To set up voice control using Google Home or Amazon Alexa, visit sharkclean.com/app for instructions.
© 2020 Shark Ninja Operating LLC. BOTBOUNDARY, SHARK, and SHARK IQ ROBOT are registered trademarks of Shark Ninja Operating LLC. CONSTANT STATE OF CLEAN and SHARKCLEAN are trademarks of Shark Ninja Operating LLC. APPLE, the Apple logo, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. APP STORE is a service mark of Apple Inc., registered in the U.S. and other countries. GOOGLE, GOOGLE ASSISTANT, GOOGLE PLAY, the Google Play logo, and Android are trademarks of GOOGLE LLC.
REFERENCE LINK
https://www.sharkclean.com/page/robot-vacuums
