WHAT’S INSIDE
- A Vacuum Pod
- B Motorized Floor Nozzle
- C Handle & Hose
- D Wand
- E Accessory Holder
- F 12″ Crevice Tool
- G Upholstery Tool
ASSEMBLY
TWO WAYS TO CLEAN
UPRIGHT
LIFT-AWAY®
Press the release buttons to lift the pod off the nozzle, or to release the handle or wand.
Attach accessories to handle or wand. For additional parts and accessories, visit sharkaccessories.com
EMPTYING THE DUST CUP
Empty the dust cup after each use.
MAINTENANCE:
Rinse pre-motor filters every 3 months, and HEPA filter once a year. Rinse with water only, and allow to air-dry completely before reinstalling. See the enclosed Owner’s Guide for more information on how to clean and replace the filters.
TIPS
For quick cord access, rotate the upper hook down and remove the cord.
Move the cord hook to an upright position to secure the cord in place.
To store your vacuum, wrap the cord around the upper and lower hooks.
CHECKING FOR BLOCKAGES
If any hair is wrapped around the brush roll, extending the cleaning time will help it clear.
Brushroll access
Using a coin, turn the locks counterclockwise to open, then lift off the cover to access the brush roll. Clear blockages from the airway. Replace the cover, pressing down firmly on all sides before turning the locks clockwise to close.
Zero-M™
Cleaner Head The Shark Zero-M self-cleaning brush roll delivers nonstop hair removal. Check for blockages or objects stuck in the brush roll.
REFERENCE LINK
https://support.sharkclean.com/hc/en-us/sections/360005961059-ZU560-Series
