Table of contents
show
SINGING-MACHINE SMK1010 Kids Pedestal Karaoke System User Guide
What’s in the box
Important Safety Information
- Read these Instructions.
- Keep these instructions.
- Heed all Warnings.
- Follow all Instructions.
- Do not use this apparatus near water.
- Clean only with a dry doth.
- Only use attachments/accessories specified by the manufacturer.
- Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
Operation
Making the Connections
- Connect the unit as shown in illustration. Press the POWER button to turn the unit on; the power indicator will light up red.
- Switch on the Bluetooth function of your Bluetooth compatible device within three feet of the unit. You will see “SM KIDS PEDESTAL” appear on your device’s search list. Select “SM KIDS PEDESTAL” to start pairing. Wait for completion of the pairing and the Bluetooth indicator will stay lit and a tone heard. Please always refer to the user manual of your bluetooth device for detailed instructions.
- SING-ALONG WITH LINE IN MUSIC: Connect the audio device to the LINE IN jack on the front of this unit.
- SING-ALONG WITH MICROPHONE: Connect the microphone into the microphone jacks at the front of the unit and slide the ON/OFF switch on the microphone to the ON position.
- SING-ALONG WITH BUILT-IN VOICE EFFECTS: Press the Voice Effect buttons ECHO, FEMALE, MALE, CHIPMUNK, ROBOT or RADIO to transform a singer’s voice. Press the NONE button to sing without any voice effect.
- Adjust the volume to a comfortable level by rotating the MASTER VOLUME control on the unit.
- Adjust the MIC VOLUME control as desired. Increasing this control will increase the volume of both microphones.
- You can press the REC button again to stop recording, the indicator will turn off. This unit is able to record for 1 minute. It will stop recording automatically after 1 minute and the record indicator will turn off.
PLAYBACK YOUR VOICE RECORDING:
To playback your voice recording, you can press the PLAYBACK button. Press again to stop.
POWER ADAPTOR OPERATION
Insert the DC plug of the power adaptor into the DC jack on the unit. Plug the other end into a standard AC outlet.
CAUTIONS:
- The AC Adaptor has a polarized plug that fits into the wall outlet only one way. If the plug does not fit properly, turn it over and try again. Do not force it.
Location of Controls
- Power button
- Pair button
- Line In jack
- Mic jacks (on unit) & On/Off switch (on microphone)
- NONE & Voice Effect buttons
- Master Volume control
- Mic Volume control
- Record button
- Playback button
Troubleshooting Guide
No Power
- Power is not on; press the POWER button to turn power on.
- Confirm that the AC adapter is connected securely to the back of the unit.
- Connect the unit to a different outlet.
- Confirm that the batteries are installed correctly.
No Sound
- If using an external audio device, raise the volume on the device.
No sound from the microphone
- Make sure the microphone is firmly connected to the MIC 1 or MIC 2 jack.
- Make sure the ON/OFF switch on the microphone is set to the ON position.
- Make sure the MIC VOLUME setting is not set too low.
- Volume is set to minimum; raise volume by turning MASTER VOLUME control.
- You have not activated the Bluetooth function of your device; refer to the Bluetooth device user’s manual.
- The system is not in pairing mode; press and hold the PAIR button to restart pairing.
Specifications
AUDIO SECTION:
- Output Power (Maximum): 2W + 2W (RMS)
BLUETOOTH:
- Working Distance: Up to 30 feet/10 meters measured in open space
- LINE IN SECTION: 3.5 mm Stereo Headphone Jack
POWER SECTION:
- Battery: DC6V (”C” cell 1.5V x 4 pcs) (batteries not included)
- DIMENSION: 15.5W x 10.1 L x 3.2 H inches/ 39.4 X 25.6 X 8.2 cm
- Adjustable height: 26.4 ~ 35.8 H inches/ 67 ~ 91 cm (optional)
- Weight: 1.43 lbs/ 0.65 kgs
