Skullcandy Grind Fuel True Wireless Earbuds User Manual

Skullcandy Grind Fuel True Wireless Earbuds User Manual

Let’s get started

Take the earbuds out of the charging case and remove the protective stickers from the charging points.

1. Place the earbuds in the charging case and leave the lid open. The LEDs will illuminate.
2. Open Bluetooth settings on your device. Select Grind Fuel from the list of available devices.
3. Accept any PAIR or OK prompts. Your earbuds will connect to your device. They are now ready to use.

Having trouble?

No audio in one earbud?

Let’s re-sync your earbuds. Place them in the charging case and close the lid for 2 seconds. When removed, both earbuds should play audio. If not, return the earbuds to the case and follow the steps below.

1. On vour device. open Bluetooth OFF
2. Remove both earbuds from
3. Make sure they are both powered N
4. Press the button on both earbuds 3 times simultaneously. The LED will go through a series of pulses as they re-sync.
5.  blue flashes indicate a successful sync.
6. On your device, open Bluetooth settings turn Bluetooth ON, and select “Grind Fuel”.
7. LEDs in both earbuds will blink blue 3 times.
8. A unique prompt will indicate when the earbuds are connected

Resetting your earbuds to resolve pairing issues.

1. On your device, open your Bluetooth settings and remove “Grind Fuel” from your paired devices list. Then turn Bluetooth OFF.
2. Remove both earbuds from the case.
3. A voice prompt will indicate that vour earbuds are powered ON.
4. Press and hold the button ONLY on the right earbud for three to 3 seconds.
5. A tone will indicate a successful reset and the right earbud will flash purple three 3 times. A voice prompt will say ready to pair” and BOTH earbuds will begin to pulse Red/Blue.
6. On your device, open Bluetooth settings and turn Bluetooth ON. Select “Grind Fuel and accept any PAIR or OK prompts to complete pairing.

Questions Visit:

• www.skullcandy.com

FCC Compliance

The FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Consult the dealer or an experienced radio/TV technician for help

IC Statment
Le présent appareil est conforme auz CNR d’Industrie Canada applicables aux appareils radio exemps de licence. L’exploitation est autorisée aux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouliiage radioélectrique subi, mȓme si le brouillage est susceptible d’en compromettre le fonctionnement.

Details

Skullcandy power accessories are backed by a 1-year warranty. If it doesn’t work the way we promised, we’ll make it right. For
claims, questions, or Terms & Conditions:

U.S. & Canada only: visit Skullcandy.com/warranty or call 1-888-MYSKULL In All other countries: visit Skullcandy.com/support/international-support Many electrical items can be repaired or recycled, saving natural resources and the environment. If you do not recycle, electrical equipment will end up in landfills where hazardous substances will leak out and cause soil and water contamination – harming wildlife and human health.

To remind you that old electrical equipment can be recycled, it is now marked with a crossed-out wheeled bin symbol. Please do not throw any electrical equipment (including those marked with the crossed-out wheeled bin symbol) in your bin. Many Local Authorities will have containers that collect batteries for recycling. Public buildings and your workplace may also have containers. If you do not recycle, batteries will end up in landfills where hazardous substances will leak out and cause soil and water contamination

Harming wildlife and human health. Batteries containing hazardous materials such as mercury (Hg), cadmium (Cd), or lead (Pb) are marked with their chemical symbols as well. This symbol means that according to local laws and regulations, the battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities or return it to the purchase location for recycling or disposal.

REFERENCE LINK

https://www.skullcandy.com/grind-wireless-earbuds/

DOWNLOAD PDF LINK