Smartwatch For Less SKY-9 User Manual
Wear it properly
The bracelet is best worn after the ulnar styloidAdjust the size of the wrist according to the adjustment hole; buckle the wrist strap buckle. The sensor should be close to the skin to avoid moving.
Charge the bracelet
Use it for the first time to ensure that the battery is in normal condition. If the power is not turned on normally, please connect the charger to charge the device.
Install the bracelet app on your phone
Scan the QR code or go to the App Store, app download, and install the app. Android/IOSSystem requirements: Android 5.0 and above; iOS 9.0 and above; support for Bluetooth 4.0.
Device connection
- For the first use, you need to connect the APP for calibration. After the connection is successful, the bracelet will automatically synchronize the time.
- Turn on the Bluetooth switch of the mobile phone system → enter the app device module settings → click “Bind device, experience more features” to enter, it will automatically search for nearby Bluetooth devices on the bracelet, find and connect the bracelet device.
- After the pairing is successful, the APP will pop up a guide page. According to the instructions, jump to the mobile phone system Bluetooth search to find the WellAudio device and connect it. After the connection is successful, you can make/receive calls and listen to music (Note: If the mobile phone system Bluetooth has not been searched WellAudio equipment, please enter the Dual mode menu and set it to On, you cannot make calls without connecting the theWellAudio equipment.)
- APP will automatically save the Bluetooth address of the bracelet, and the APP will open and run in the background, and will automatically search and connect the bracelet;
- Android phones use all notification permissions to read contact information and give the app background running in the phone settings.
Bracelet function description
Down button: Long press for 2 seconds to switch the machine; short press on any page to return to the dial; short press on the dial page to turn off the screen button: Short press on other pages to return step-by-step
- Slide down the standby page to enter the shortcut interface, slide up to enter the main menu; slide left to enter the side screen page.
- Long press on the standby page to set the dial.
- The main menu can switch different styles
- Bracelet reset device This function will clear all data of the bracelet(such as step counting)
Clock interface
After synchronizing with the phone, the bracelet will automatically calibrate the time;
Number of steps
Wear the bracelet and record the number of daily movement steps to view the current real-time steps.
Heart rate, blood pressure, and blood oxygen three in one
After entering the heart rate three-in-one test interface and waiting for a few seconds, the current heart rate, blood pressure, and blood oxygen test results will be displayed. This function requires the bracelet to support heart rate and blood pressure sensors.
Phone book
Add 8 commonly used contacts in the APP. After the bracelet is successfully connected with the APP Bluetooth, the contacts can be displayed in the bracelet phone book. Click the contact to make a call(Note: The phone needs to be connected to a WellAudio device).
Music Control
The bracelet can control the previous song and the next song, and pause/start playback. (Note: WellAudio devices need to be connected using this feature phone)
Voice assistant
Pull down the standby page to enter the shortcut interface, and click on the voice assistant menu to start the language assistant. (Note: The mobile phone needs to be connected to the WellAudio device at the same time, and the smartphone needs to set the user’s voice in advance in the voice menu)
Dual mode switch
This switch needs to be turned on for the phone to search for the WellAudio device. If the phone is not connected to the WellAudio device within 5 minutes after the bracelet is turned on, the switch will be turned off automatically, and it needs to be turned on manually when it is used again. (Note: If the WellAudio function is not used within 5 minutes after connecting to the WellAudio device, it will automatically turn off. The call, play music, phonebook, and voice wake-up functions can be directly activated and used)
Custom dial
You need to connect to the APP to get the dial settings, you choose the recommended dial/photo album custom dial to synchronize to the bracelet.
Sleep mode
When you fall asleep, the bracelet will automatically enter the sleep monitoring mode; automatically detect the number of deep sleep/light sleep/waking you throughout the night, and calculate your sleep quality; the bracelet terminal can view the total duration of deep sleep/light sleep/waking sleep, APP terminal You can view the details of sleep data. Note: You need to connect to the app and wear the bracelet to sleep before you can upload your sleep data to the app and start testing at 10 p.m.
Information mode
When the APP is connected, if the push notification reminder is turned on, or when the bracelet pushes multiple reminder messages, the interface views the latest message records.
Application push:
In the connected state, if this function is turned on, when there are WeChat, QQ, Facebook, and other messages, the bracelet will vibrate to remind and display the content received by the app (you can also enter the bracelet information menu to view the latest message records). (TheAPP needs to be given the right to obtain system notifications, and the bracelet can display 20-40 words).
Note:
The incoming call reminder system is enabled by default, with no option (calls for incoming calls need to be connected to WellAudiodevice)
Other functions:
Turn on the vibration setting function, when there are calls, messages, or other reminders, the bracelet will vibrate. If it is off, the bracelet will only have a screen reminder without shaking to avoid interruption. Tips for Android users: When using the reminder function, you need to set it to allow “FitPro” to run in the background; it is recommended to add “FitPro” to the management and open all permissions.
Alarm setting
In the connected state, 8 alarms can be set. After setting, it will be synchronized to the bracelet; an offline alarm is supported. After the synchronization is successful, even if the APP is not connected, the bracelet will be reminded according to the set time.
Remote photography
In the connected state, start the photo from the wristband or the app to enter the remote camera interface, shake/turn the wrist/touch the bracelet, and automatically take a photo after 3 seconds of counting down. Please allow the APP to access the photo album to save the self-portrait photo.
Remove device
Remove the device This feature will erase data and remove device.
Basic parameters
| Equipment type | smart wristband | type of battery | Lithium polymer |
| Vibration motor | stand by | Synchronously | Bluetooth 4.0 |
| Operating
temperature | -10°C~50°C | sensor | Low power acceleration
sensor |
| System
Requirements | IOS9 or above / Android5.0 or above | ||
Precautions
- Bathing and swimming should not be worn.
- Please connect the bracelet when synchronizing data.
- Use the included charging cable to charge.
- Do not expose the handle ring to moisture for a long time, where the temperature is extremely high or extremely low.
- The flashover of the wristband restarts. Please check the memory information of the mobile phone to clear it and try again, or exit the APP and reopen it.
- If water enters the horn hole during the use of the machine, and there is a hoarse sound, you need to throw the water out along the direction of the horn hole.
REFERENCE LINK
https://www.smartwatchforless.com/products/sky-9-smartwatch-with-bt-call/
