SNAILAX SL-593 Foot Massager with heat
Safety Instructions
Please read the following instructions carefully before putting your massage device into use to ensure trouble-free operation and optimum efficiency. Please retain these instructions for further reference!
- The device conforms to recognized technical principles and the latest safety regulations.
- This items is NOT A TOY. Close supervision is necessary when this appliance is used by , on, or near children or disabled persons. Do not allow children to play with product .
- Do not allow more than one person to use this product at a me.
- The device should never be left unattended when plugged in.
- Never use any power sources other than UL standard home adapter provided as original equipment with this massage device.
- Any possible repairs may only be carried out by authorized expert staff. Improper use and unauthorized repairs are not permitted for safety reasons and lead to loss of warranty.
- Please avoid contact of the device with water, high temperatures and direct sunlight.
- Do not damage ,process ,excessively bend ,pull hard ,twist or knot power cord.
- Do not use any damaged cables, plugs or loose sockets.
- Do not use the product when the power cord is damaged.
- In case of malfunction, disconnect immediately from the mains.
- Misuse or incorrect use excludes any liability for damage.
- Do not use while you sleep.
- In order to avoid excessively stimulating the muscles and nerves, the recommended massage me should not be exceeded 15 minutes at a me.
- Do not use this product for medical treatment.
- People who are insensitive to heat must be accompanied by normal person when using this massage device.
Instruction
Thank you for purchasing Snailax Massager. With normal care and proper treatment, it will provide years of reliable service.
Please read all instructions carefully before using this product. Please retain this manual for future reference.
FEATURES
- Vibration massage for feet, legs, back
- Optional heat function
- 2 levels of heating
- 3 levels of vibration intensity
- 3 massage modes
- Wireless remote controller
- Removable and washable cover
CONTENTS
TECHNICAL DATA
- Measurements: 15.4 x 12.7x 4.1 inches
- Weight: Voltage: 5.8 lbs
- Nominal Power: Input: AC 100-240V ~50/60Hz Output: 24VDC 1500mA max. 36Wa
- Automatic run time: 15 minutes Setup and Operation
Place the massager on the floor or a support (like chair, sofa, etc) Please use in the manner shown below.
Note: if use the massager by standing posture, the user must stand on the massager with both feet and weight no more than 200 pounds.
- Connect the adapter cable to the corresponding port on the foot massager.
- Plug the home adapter into electrical outlet ( the adapter is safe to use with both 110-120V & 220-240V )
- Turn on the massage device through operating wireless remote controller or control panel .
- This device will switch off automatically after 15 minutes timer run out.
- Do not setup or use the device in a bathroom or similarly wet / damp areas.
- Do not use the wet hand to plug in or pull out the adapter in order to avoid any electric shock
- Before plug ,please check and make sure the power cord is undamaged.
- When moving the product, please don’t pull the power cord or drag the product directly to avoid any damaged caused.
- Please don’t let children and pets play the products for preventing any accident happened.
- Do not use this product in the damp environment to avoid electric shock.
Controller Instructions
Option 1: Use a wireless remote controller
- Power Button: Press to turn on the device, it starts to work at Mode I, high massage intensity, and high level of heating. Press again to turn off the device.
- Mode Button: Press to cycle Mode I–> II–> III–> II–> I–> II–> III…
- Intensity Button: Press to cycle high–>medium–>low–>medium–>high… level of massage intensity
- Heat Button: Press to cycle the high/low/off settings of the Heating function. And the corresponding indicator will be red/purple/green
Option 2: Use the control panel on the product
Power Button:
- 1st press: turn on the device, it starts to work at Mode I (always on Mode I), high intensity, and high level of heating.
- 2nd press: shift to medium intensity.
- 3rd Press: shift to low massage intensity.
- 4th press: turn off the device.
- Heat button: Press to turn on /off heating function.
- Buzzer: When pressing the Mode button, the buzzer sounds “DI”/”DI DI”/”DI DI DI”, it indicates mode I/mode II/mode III respectively; when pressing the Heat button, it respectively indicates low/ medium/high level of heating; when pressing intensity button, it indicates low/medium/high massage intensity.
TROUBLESHOOTING
| Fault | Solutions |
| There is a clattering noise in the movement | This is perfectly normal caused by the working of product. It is normal status. |
| The massage device switches off suddenly | Device may have been in use for 15minutes. Auto-shut off function activated. Continue using by pressing the ‘power’ button after resting the unit for 15minutes. |
|
The massage device fails to start | Check if device has been used for more than 15mins. If so, let device rest for 15mins before continuing. Device may require longer time to cool in warmer environments. |
| Check if the adapter is plugged into the socket. | |
| Check if the adapter output is connected to the device power inlet. |
Warranty
If you have any issue with the product, please feel free to contact us by sending an email to support@snailax.com We will strive to provide the best service possible within 24 hours.
30 days unconditionally Return
Snailax products can be returned to receive a full refund for any reason within 30 days. Please contact our customer service (support@snailax.com), our staff will contact you within 24 hours.
90 days refund/replace
Snailax products can be returned/replaced within 90 days if the product breaks down in the period of proper use.
12 months Warranty
If the product breaks down within 12 month in period of proper use, customers can enjoy the
relevant warranty to get them replaced.
Attention!
No warranty will be given to any force majeure and man-made causes of a defective product, such as improper care, personal tear down and willful damage, etc.
Extend Warranty for Free
Enter the following URL or scan the QR code below to find the Snailax Facebook page and like it, enter “Warranty” to messenger to extend your warranty from 1 year to 3 years.
https://www.facebook.com/snailax
Send the message“Warranty” and email us at support@snailax.com to extend your warranty from 1 year to 3 years.
REFERENCE
https://cdn.shopify.com/s/files/1/2502/3672/files/SL-591_user_manual_2022.07.07.pdf?v=1664349068
