Serenelife SLBCAM20EU Baby Monitor Manual
This User’s Guide provides you with all the information you need to get the most from your product. Before you can use the baby monitor, we recommend you insert and fully charge the battery in the parent unit, so that it continues to work if you disconnect it from the mains power to carry it to another location. Please read the Safety Instructions on page 6 before you install the units.
Got everything?
- 1 x Parent Unit
- 1 x Baby Unit
- 2 x Power adapter
OVERVIEW OF YOUR PARENT UNIT
- Power Key
- Power adapter connector
- Lcd display
- Microphone
- Power / Signal indicating led
- Charging indicating led
- VOX Key
- Music play on/ off key
- PTT Key
- Speaker
- OK / Menu Key
- Return Key
- Volume + / Up
- Volume – / Down
OVERVIEW OF YOUR BABY UNIT
- Light Sensor
- Camera Lens
- Power indicating LED
- Microphone
- Infrared LED
- Power Key
- Power adapter connector
- Temperature Sensor
- Pair key
- Speaker
SAFETY INSTRUCTIONS
This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User’s Guide, safe to use. Therefore, always read the instructions in this User’s Guide carefully before using the device.
- Adult assembly is required. Keep small parts away from children when assembling.
- This product is not a toy. Do not allow children to play with it.
- This baby monitor is not a substitute for responsible adult supervision.
- Do not place the baby unit or cables in the cot or within arm’s reach of the baby (at least 1 meter away).
- Keep the cords out of reach of children.
- Do not use the baby monitor near water or a heat source
- Only use the power adapters provided.
- Do not touch the plug contacts with sharp or metal objects.
BABY UNIT POWER SUPPLY
- Connect the small plug of the power adapter to the baby unit and the other end to the main socket.
NOTE: Only use the power adapter provided. - A blue light led will display indicating the baby unit is working.
PARENT UNIT POWER SUPPLY
Charging the parent unit fully before use is recommended. This will allow the unit to operate the battery in the event of a power failure.
- Connect the plug of the power adapter to the parent unit and the other end to the mains socket
NOTE: Only use the power adapter provided - The charging LED will illuminate means the battery starts charging
- Push the power key ON to turn on the parent unit.
USING THE BABY MONITOR
SETTING UP
Place the baby unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. Adjust the baby unit until you are satisfied with the image in the parent unit.
NOTE
Do not place the baby unit within the baby’s reach! If there is interference in the picture or sound, try moving the units to different locations, and ensure they are not close to other electrical equipment.
PAIRING CAMERA
The enclosed baby unit has already been registered, You do not need to register it again unless the baby unit loses its link with the parent unit. See section “5.2 Camera Registration” for more details.
VOX FUNCTION
Pressing the VOX key will turn on VOX mode, The VOX mode automatically puts the display in sleep mode to save battery. It reactivates automatically when it detects noise in the baby’s room.
MUSIC PLAYER
Pressing the music key will turn on the music player and play lullaby through the baby unit; pressing the music key again will turn on it.
TALK FUNCTION
Press and hold the PTT key on the parent unit to talk to your baby through the baby unit loudspeaker. The symbol will be displayed at the bottom of the screen.
ADJUSTING THE VOLUME
When the video is playing mode, press the Volume key to decrease the volume or the Volume+ key to increase volume. The display will show the current volume for 5 seconds.
MONITORING SCREEN ICONS
- Signal strength indicator
- The temperature of the baby’s room
- Lullaby is playing
- Vox function activated
- Alarm activated
- Battery indicator
- PTT function activated
- Date and time ( HH: MM AM/PM DD/MM )
MAIN MENU
Press the “OK/Menu” key at the monitoring screen will enter the main menu, It contains 6 items :
- Camera
- Alarm
- Settings
- VOX
- Languages
- System info
You can press the “Up” key or “Down” key to move the cursor to select an item and pressing the “Menu” key will enter the sub-menu which you selected. Press the “Return” key will back to the monitoring screen.
CAMERA REGISTRATION
Press the “OK/Menu” key to the entry registering screen, then push the pairing key on the back of the baby unit within 10 seconds.
VOX
SYSTEM MODE
This menu allows you to choose the working mode from the following: Normal mode / VOX mode.
VOX SENSITIVITY
Switch the Vox sensitivity to Low / Medium / High level.
LANGUAGE
The language setting menu allows you to choose your language from the following :
- English
- French ( Francais )
- Spanish ( Espanol )
- Portuguese ( Portugues )
- Italian ( Italiano )
- German ( Deutsch )
- Turkey ( Turkce )
TECHNICAL FEATURES
- Frequency: 2.4 GHz Digital
- Modulation Mode: GFSK
- Operating temperature: -10 to +45°C
- Operating Humidity: <85%
- Range: 260m in an open field
MONITOR
- LCD: 3.2 “ TFT LCD
- Resolution: 320X240@20fps
- Battery: Li-Polymer 750mAh
- Dimensions (W x H x D): 120mm x 70mm x 17mm
CAMERA
- Sensor: 0.3Mega pix CMOS
- Minimum Illumination: 0Lux ( IR on)
- Night Vision Distance: 15ft ( 5m)
- Lighting sensor
- Temperature sensor
- Dimensions (W x H x D): 67mm x 106mm x 67mm
Monitor will not connect