JXLCAM Smart Indoor PTZ Camera User Manual
Install APP
Use your mobile phone to scan the following two-dimensional code, select the IOS or Android version according to
the mobile phone system to install the APP, APP name: JXLCAM。
Turn on the device
Connect using the e27 bulb holder plug Equipment to 110V- 220V power supply, red indicator is Always on, the device enters the waiting state Connected, network configuration succeeded, and The red light flashes once.
Note:If the red light is always on er you cannot connect, you can press and hold the reset button to reset
Option 1: Local mode
When there is no WiFi in the environment, you can use the AP mode to connect, the effective distance of this mode does not exceed 10m, Localized monitoring and viewing can be realized.
- Each device has a unique WiFi name (device ID), and the format is unified as “ACCQ/BCCQ…….”;
- If you need to shoot and store videos, please install an SD card.
Option 2: Remote mode
If you want to use the complete functions of the device and realize remote monitoring, you need to configure the remote mode.
- First confirm that there is an available WiFi signal near the device, power on the monitoring device, the red indicator light flashes, and the device enters the standby state.
- Connect the mobile phone to the WiFi in your environment, open the software JXLCAM, and follow the steps below:
CLICK ON THE PREVIEW PAGE TO ENTER THE MONITORING INTERFACE:
