Otium Smart Watch Phone One Bluetooth User Manual
SAFETY WARNING
- The information in this document won’t be modified or extended in accordance with any notice.
- The watch should be charged for 2 hours at least before use.
PRODUCT DETAILS:
Quick Start Guide You can enter into next page by sliding the screen to the left, and return to the last page by sliding the screen right, It will be in mistake for a click if the drag distance is too short.
PRODUCT QUICK USE
Download the Sync software. Scan the QR code, and download the APP which can match your Android phone. This APP only uses for the Sync between watch and phone, and will not take your phone GPRS. If you have already downloaded the related software, please check the version and use the newest related software in order to ensure all functions normal use. Please update the software when it has a new one.
Install and use the Sync software Android Application Installation:
Please install the Android application on your smartphone. You can store it in your phone memory or install it by Sync Assistant. Android application usage (if you already installed) (Smartphone) Setting – – Accessibility. Enter into Bluetooth notice(service). enabled this service. (please choose sure when shown a warning notice) the application runs in the background automatically and the sync function will be switched on. Click the Bluetooth notices and choose the Notification service, select your Personal or System application in Notify application. Telephone service is including SMS, incoming call, and seek watch.
Bluetooth Connection and Sync function
Phone setting- turn on the Bluetooth – -search for devices, please pair devices when found the [GLK or other, and also choose [yes) in your mobile phone, paired done. Please choose (sure] when there is a phone book request, meanwhile, you’d better choose (no remind again], this is convenient when you connect next time (without remind again),
Notice:
The Sync software can open in sync APP already installed and Accessibility, the mobile will show Bluetooth connection done after 2-5min; t watch will inform you of the time of Sync with your phone, then the Sync switched o The message will sync to your watch when it incoming to mobile.
From watch to phone
BT Dialer on GLK-search new device–found your smartwatch (such as Meizu Pro 5) – – connect. The processes of the next are the same with 3.3.1
Pedometer
It can be adopted as a tool to avoid insufficient or excessive exercise by measuring calories or calorie consumption based on collected data, such as the number of steps, distance, speed, time, etc., to control exercise. If you want return to the main menu but keep a pedometer during the exercise. please press the not.
COMMON TROUBLESHOOTING
Please refer to the key function for any problems with the watch. If the problem is still unsolved, please contact our dealer or serviceman
- Unable to switch on
The time of press the power button is too short, please keep it more than 3 seconds. Low power, please charge it. - Shut down automatically
Low power, please charge the watch - Using time is too short.
The battery is not full, please make sure it is at full power(full charge needs 2 hours at least). During the use of a SIM card, the power will be run off soon if the signal is too poor. - Unable to charge.
The battery’s life will be reduced after a few years, please check whether the battery is working. Change a new charger if it is unworkable Please check if the USB slot connecting well, if not, please try again. - No caller s name when an incoming call
Forgot to choose to upload the phone book when connected with BT.or unselected keep uploading the phone book. Forgot to sync the phone book when reconnected, please pair the device and connect BT again.
