Smartwatch For Less Bracelet User Manual
Welcome to our high-performance wristband smart bracelet which creates a thoughtful and healthy experience for you.
Device maintenance Please remember the following tips when you maintain your smart bracelet:
- Clean the smart bracelet regularly, especially its inner side, and keep it dry.
- Adjust the smart bracelet tightness to ensure air circulation.
- Excessive skincare products should not be used for the wrist wearing the smart bracelet.
- Please cease wearing the smart bracelet in case of skin allergy or any discomfort.
Schematic diagram of the main body of the smart bracelet
Power-on
Long press the side button for 3 seconds or plug in the charging clamp to charge the smart bracelet.
Downloading and binding of smart bracelet APP
- Download and install APP
- Scan the QR code with your mobile phone to download the APP.
- For the IOS system, select APP search Da Fit. Android system, select Google Play to download and install Da Fit. Or scan the QR code to download
Note: your mobile phone must support Android 5.1 or IOS 8.0 or above, and Bluetooth 4.0 or above. - Bind smart bracelet with APP
- Click on “Add Device” to bind the smart bracelet.
- Click on your device in the device list scanned.
- The IOS system will show a Bluetooth pairing request and you can click on Bluetooth “Pairing” to confirm. Connect it directly to the Android system.
- Successfully bound.
Introduction of smart bracelet functions
Power-on status
Switch the menu interfaces of the main screen, as the interfaces shown in the following;
Frequently Asked Questions (FAQs)
- Why does the smart bracelet automatically disconnect Bluetooth when the Android screen goes out? 1> Lock the background APP. When the Da Fit process is cleared, the smart bracelet will be disconnected from the mobile phone.
- Set APP self-startup
- Unrestricted background operation. The Android mobile phone installed with the APP intelligently restricts the background operation by default, and the App should be set manually without any restriction.
Why cannot the smart bracelet receive a message push?
- Please confirm that you have turned on the switch for message push at the mobile phone client.
- Please confirm that messages can be displayed normally in the mobile phone notification bar. The message push on the smart bracelet is completed by reading the message from the mobile phone notification bar. The smart bracelet will not receive the message push if there is no message in the mobile phone notification bar. (You need to find notification settings in the mobile phone settings, and turn on the notification switch of WeChat, QQ call, SMS, and mobile phone client).
Why can’t take a hot bath with the smart bracelet?
Answer: the bath water has a relatively high temperature and generates a lot of vapor which is in the gas phase with a small molecular radius and can easily infiltrate into the smart bracelet from the shellaap. When the temperature drops down, the vapor will condense into liquid-phase droplets which will easily cause a short circuit inside the smart bracelet and damage the circuit board and then damage the smart bracelet. Note: for more FAQs, please refer to Da Fit APP feedback.
Warning:
Please consult your doctor before you take a new sport. The smart bracelet should not be used for any medical purpose though it may dynamically monitor the heart rate in real-time.
