Table of contents
show
Sony C-100 High-Resolution 2-Way Condenser Microphone User Guide
Name and Functions of Parts
- Microphone
- Directivity (Polar pattern) switch
- PAD switch
Select the PAD switch to the level of input source. - LOW CUT switch
The low cut filter reduces the wind noise effectively. - Output connector (XLR-3-12C type)
The sound recorded with the microphone is output. The power is supplied to the microphone from an external equipment through this connector when the microphone is operating on the external power supply. - Wind screen
Attach to the microphone to reduce wind or breathing noise. - Cradle suspension
When using a microphone stand (not supplied), for example, attach the cradle suspension to the microphone. If you do not plan on using the stand adaptor, detach it, and then attach it to a microphone stand (sold separately). - Ring
Be sure to rotate and fix the ring after the microphone is equipped to the cradle suspension. Unless done so, there is a risk the microphone will fall. - Stand adaptor
Power Supply
This microphone is powered only from an external power supply. Connect output connector of the microphone to the microphone connector of a Phantom power supply (external power supply) or an audio mixer. For connection, use a microphone cable.
How to open the carrying case
- Pull up the bottom hinge.
- Pull down the upper hinge.
- Push up the lid.
- Do not place a heavy object or sit on the carrying case.
Notes on Use
- Microphones are delicate. Do not drop or subject it to excessive shock.
- Avoid extended usage or storage in high humidity or temperatures above 60 °C (140 °F). It may cause noise or failure.
- It takes a few minutes for the output voltage to stabilize after changing the directivity switch.
- The microphone output signal is a balanced output.
Specifications
- Type: 2 Way Microphone (Condenser + Electret condenser)
- Power supply: External power supply operation 44 V to 52 V DC (IEC* 61938 P48)
- Power consumption: Less than 4.5 mA
- Output connector: XLR-3-12C Type
- Dimensions: 40 mm dia. × 175 mm (1.57 in. dia. × 6.89 in.)
- Mass: Approx. 290 g (10.2 oz)
