Table of contents
show
Sony MDR-MV1 Open Back Reference Monitor Headphones User Guide
Precautions
- When disconnecting the cable, pull it out by the plug, not the cable. Otherwise the cable may break.
Other notes
- Do not subject the unit to excessive shock.
- Wipe the exterior clean with a soft, dry cloth. For stubborn stains, moisten a soft cloth with warm water and then wipe. Do not use detergents, alcohol, or similar agents, as these may cause discoloration or deterioration. To remove dust, use a soft brush or similar and gently wipe clean.
- Do not apply weight or pressure to the unit for long periods, including when it is stored, as it may cause deformation.
- If you experience discomfort while using the unit, stop using it immediately.
- The earpads may be damaged or deteriorate with long-term use and storage.
How to use
- Grab the rubber part of the plug, insert the plug firmly until it clicks, then fasten the rotating part.
- Rotating part
- Plug
- Headphone cable
- Stereo phone plug
- Plug adaptor
- Stereo mini plug
Note about static electricity
If you use the unit when the air is dry, you may experience discomfort due to static electricity accumulated on your body. This is not a malfunction of the unit. You can reduce the effect by wearing clothes made of natural materials that do not easily generate static electricity
Specifications
- Type: Open back, dynamic
- Driver unit: 40 mm (1.58 in)
- Power handling capacity: 1 500 mW (IEC*)
- Impedance: 24 Ω at 1 kHz
- Sensitivity: 100 dB/mW
- Frequency response: 5 Hz – 80 000 Hz (ICE*)
- Mass: Approx. 223 g (7.87 oz) without cable
