Xleader Soundangel A8 Touch Wireless Speaker User Manual
Product Features:
- The SoundAngel A8 combined with Smart Touch Screen technology and an elegant EchoDot design is a pleasure to operate. Gently touching the controls with your fingertip allows youtochange songs, adjust volume, answer phone calls, and more.
- Our ultra-compact design fits easily into your pocket, purse, or backpack.
- Depending on your phone’s Bluetooth version, your phone can display the speaker’s batterylife.
- The speaker automatically reconnects to your device in just3 seconds.
- Automatic shutdown function: The speaker will shut down when Bluetooth is disconnectedfor 10 minutes, which is helpful to save power when the unit is accidentally left on.
Technical Data:
- The Pairing Name：XLeader A8 Battery Capacity: 1200mAh
- Charging Input: 5V / 0.5A Charging Time: 3-4 hours
- Operating Range: 10m/33ft Supported : A2DP,AVRCP
- Output Power: 4Ω 5W Φ40MM Frequency Response: 40Hz-18KHz
- Signal Noise Ratio: ≥95dB Distortion Degree: ≤1%
- Unit Weight: 180g Unit Size: Φ85 x H30mm
- Certifications: CE RoHS FCC Giteki
What’s Included:
- XLEADER SoundAngel A8
- USB Charging Cable
- 3.5mm Audio Cable
- User Manual
- Carry EVA Case
- Feedback Card
- Warranty Card
Product Model:
Compatible Devices
iPhone, Android Phone, Tablets, Computers, Laptops, Mac Book, Echo Dot, Kindle, MP3 Players, PSP, TV, and more.
Power Button:
How to Turn on/off the speaker and Switching Mode
- Press and hold for 3 seconds to turn the speaker on or off.
- Press once to change modes: Bluetooth Mode–Music Mode (Micro SD Card)– Aux Mode (Audiolinein)
Notice: If no Micro SD card or audio cable is plugged into the speaker, the speaker is always in BluetoothMode.
Pause/Play Button
- Short Press : Play/Pause/Answer call/Hang up
- Long Press: Disconnect Bluetooth
- Double Tap quickly: Redial the last call
Indicator Light:
The LED has three colors as follows:
- Red: The battery is charging (It will turn off when fully charged.)
- Blue: The speaker is on and ready to play
- Pink: The speaker is on and ready to play while simultaneously charging
The LED has two flashing modes:
- Flashing Fast: The unit is pairing (The light stops when paired.)
- Flashing Slow: The speaker is playing music.
Blue Backlight:
The touchscreen has a blue backlight, which will automatically turn off to save power when not touchedfor 45 seconds.
How to Pair with Your Device
Turn on the speaker and it will automatically enter Bluetooth mode. On your device, under Bluetooth, look for “XLeader A8.” (For devices with Bluetooth versions under 3.0, press “Yes” to confirmpairing.) Enter a password or PIN code “0000” (four zeros), then press “Yes” or “OK” to finish pairing.
- Phone/Tablet
Turn on the speaker–Open the Phone/Tablet Settings–Bluetooth–On–Searching/Scanning –XLeader A8– Paired/Connected–Play music - Computer/Laptop:
Turn on the speaker–Open the Laptop Settings–Devices–Bluetooth and other devices–turn on the Bluetooth– Add Bluetooth or other devices–Bluetooth–Searching device–XLeader A8–Paired/Connected–Play music
Notice: If the computer does not have Bluetooth, please insert the Bluetooth adapter and download the Bluetoothdriver to use it normally.
- Mac Book:
Turn on the speaker–Open the Mac Book System Preferences–Bluetooth–turn Bluetooth on–searching device — XLeader A8- Paired/Connected–Play music - Echo Dot:
Turn on the speaker–Open Alexa APP–settings–set up a new device–Bluetooth–Pair a new device–Searching Device –XLeader A8–Paired/Connected–Play music - Kindle:
Turn on the speaker–Open Kindle Settings–Wireless–Bluetooth–Enable Bluetooth(ON)–Search for Device — XLeader A8- Paired/Connected–Play music
Microphone / Call:
The speaker has a built-in microphone under the Aux jack. 2. When your phone is connected via Bluetooth, press the “Pause” button to answer a phonecall. 3. To redial the last call, double tap “Pause” quickly
Notice: For higher call quality, please speak near the microphone.
Micro SD Card (Memory Card):
- Upon inserting your Micro SD Card, the speaker will automatically go into Music Mode andplayyour music.
- The speaker supports Micro SD Cards up to 32 gigabytes.
- The following music formats are supported: MP3, WMA, WAV
- Notice: Insert a Micro SD card into the speaker and the speaker will play your songs in sequential order. If there are other files (other than songs) on the SD card, it may cause thespeaker to crash. If this happens, hold the power button to turn off the unit, and then power onafter you remove the extraneous files from the Micro SD card.
Aux/Line-in:
Insert your audio plug into the 3.5mm jack on the speaker, and connect the other side to your device.
Notice: In Line-in Mode, the speaker cannot switch between Previous and Next songs,the speaker cannot control the device’s APP.
Tips:
- Leaderway Technology has worked across R&D and sales in the audio industry for many years. Basedon consumer feedback, we designed this wireless speaker with touch screen technology. The touchbuttons are located seamlessly at the top of the unit for convenient use.
- With the speaker located under the unit, sound is balanced via high fidelity speakers including a compact subwoofer. Sound is engineered so that it’s clear and voluminous when reflected off the surface underneath.
- For most small speakers, usually it has only a little bass, it focuses on treble and clarity. For Dual stereospeakers, it has big bass, it combines bass and stereo sound.
- Our consumers let us know they love our speaker because the sound is clearer and louder comparedto other brands on the market. Consumers also report better overall sound quality, the longest batterylife, and they love our touch screen technology!
- As a reliable manufacturer, we listen to and directly incorporate this consumer feedback into our product development to constantly improve and meet the needs of our consumers.
FCC Rules
Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance couldvoid the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, the user is encouragedtotryto correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
REFRENCE LINK