CLEER SPACE SMART HOME SPEAKER USER MANUAL
Product Introduction
Front
Back
Touch panel
Touch anywhere on the touch panel to illuminate icons
Product set up
- Plug the included power cable into SPACE.
- Plug the included power adaptor into a power outlet.
- The light ring will begin to spin around in blue.
- In about a minute, the light ring will change to yellow and SPACE is now ready for set up.
- Download and open the Cleer SPACE app (iOS or Android) on your phone or tablet.
- Turn on Bluetooth on your device and press the MODE icon on SPACE for 5 seconds to initiate set up mode.
- After setting up, go to the Cleer SPACE app and tap on SPACE, then tap on “Amazon Alexa Login” to sign in to Amazon with an Amazon account. After signing in, Alexa will be available to use.
- If the set up process does not start automatically, go to the Cleer SPACE app and press “Add a new device”.
- During set up, SPACE will need to connect to the Internet to access Amazon services. Please make sure to have
the Wi-Fi password ready. - If you want to connect to SPACE via Bluetooth, you can activate Bluetooth pairing mode by pressing the
Bluetooth button at the back of SPACE.
Features
Voice service: Amazon Alexa – requires signing in to Amazon with an Amazon account by using the Cleer SPACE app.
- Improve voice service clarity: Follow Me mode – when using the Alexa feature, this mode will direct Alexa’s reply towards the location of the requester instead of the entire room.
- Audio modes: 360° / Stereo / Movie
- •Microphone: 4 Mic Far-Field Voice Recognition
- Features in Cleer SPACE app
- Sign in / sign out of your Amazon account
- Change audio mode
- Mute microphone for voice assistant
- Network selection and check network status
- Turning Follow Me mode on and off
- Rename Cleer SPACE
- Check Firmware version
Specifications
- Woofer: 3.5” x 1
- Full range Dynamic driver: 1.75” x 7
- Rated power: 55W
- Product dimensions: 217 x 156mm (HxD)
- Weight: 2.3kg
- Frequency response: 20Hz – 20kHz
- Bluetooth version: 4.1
- Bluetooth transmitter power: ≤10dBm
- Wi-Fi: IEEE 802.11b/g/n (2.4GHz & 5GHz)
- 2.4GHz Band transmitter power: ≤20dBm
- 5GHz Band transmitter power: ≤20dBm
- Power supply: DC 18V 3880mA
- Support Profile: A2DP 1.2, AVRCP 1.4, HFP 1.5, HSP, SPP1.2
Cleer Limited Warranty
(United States Only)
Cleer Limited warrants this product against defects in material or workmanship for (1) year as set forth below when purchased directly from Cleer Limited or a Cleer Limited retailer. Pursuant to this Limited Warranty, Cleer Limited will, at its option, (i) repair the product using new or refurbished parts or (ii) replace the product with a new or refurbished product. For purposes of this Limited Warranty, “refurbished” means a product or part that has been returned to its original specifications. In the event of a defect, these are your exclusive remedies.
Labor: For a period of (1) year from the original date of purchase of the product (“Labor Warranty”), Cleer Limited will, at its option, repair or replace with new or refurbished product,product determined to be defective. If Cleer Limited elects to replace the product after this Labor Warranty has expired but while the parts warranty is still in effect, it will do so for the applicable labor charge.
Parts: For a period of (1) year from the original date of purchase of the product (“Parts Warranty”), Cleer Limited will supply new or refurbished replacement parts in exchange for part determined to be defective.This Limited Warranty covers only the hardware components packaged with the Product. It does not cover technical assistance for hardware or software usage and it does not cover any software whether or not contained in the Product; any such software is provided “AS IS” unless expressly provided for in any enclosed software Limited Warranty. Please refer to the End User License Agreements included with the Product for your rights and obligations with respect to the software.
Instructions
To obtain warranty service, you must deliver the Product, freight prepaid, in either its original packaging or packaging affording an equal degree of protection to the original Cleer Limited retailer (point of purchase) or Cleer Limited Customer Service. It is your responsibility to backup any data, software or other materials you may have stored or preserved on your unit. It is unlikely that such data, software or other materials will be lost or reformatted during service and Cleer Limited will not be responsible for any such damage or loss. A dated purchase receipt from Cleer Limited or a Cleer Limited retailer is required. For specific instructions on how to
obtain warranty service for your product, Visit the Cleer Limited website: www.cleeraudio.com Or call Cleer Limited Customer Service at: 1 888 672 5337 (67 CLEER) For an accessory or part not available from your authorized dealer call: 1 888 672 5337 (67 CLEER)
Following warranty service your original Product or a replacement Product will be returned to you as your Product was configured when originally purchased.Repair / Replacement Warranty: This Limited Warranty shall apply to any repair, replacement part or replacement product for the remainder of the original Limited Warranty period or for (90) days,whichever is longer. Any parts or product replaced under this Limited Warranty will become property
of Cleer Limited.
Compliance with FCC rules
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.Radiation Exposure Statement:
- This equipment complies with FCC radiation exposure requirement.
- The device can be used in portable exposure condition without RF restriction.
