Sena SPIDER ST1 Mesh Intercom Headset User Manual
Downloadable Sena Software
Download the Sena Motorcycles App at Google Play Store or App Store.
Download the following items at sena.com.
Follow us on Facebook, YouTube, Twitter, and Instagram to check the latest information and helpful tips.
Product Details
Installation
- For more information about installation, refer to the User’s Guide
Using the Clamp Unit
Using the Glued Surface Mounting Plate
Installing the Speakers
Installing the Wired Boom Microphone
Installing the Wired Microphone
Mesh Intercom Antenna
Pull the Mesh Intercom Antenna outwards slightly to unfold it.
NOTICE
- This Quick Start Guide (Version 2.0.0 or higher) explains how to operate the SPIDER ST1 with firmware version 2.0.0 or higher.
- For operating the SPIDER ST1 with a firmware version lower than 2.0.0, refer to the SPIDER ST1 Quick Start Guide that is available when you connect the SPIDER ST1 to the Sena Motorcycles App.
Icon Legend
Basic Operations
Powering On
Powering Off
Volume Up
Volume Down
Checking the Battery Level
Phone Pairing
- Select SPIDER ST1 in the list of Bluetooth devices detected.
- For more information on phone pairing, refer to the User’s Guide.
Using the Phone
Answer a Call
End a Call
Reject a Call
Voice Dial
Music Control
Mesh Intercom™
- Open Mesh™: communication within the same channel.
- Group Mesh™: communication within the same private group.
- For more information on Mesh Intercom, refer to the User’s Guide.
Mesh Intercom On
Mesh Intercom Off
Note:
When the Mesh Intercom is on, the SPIDER ST1 will automatically connect to nearby SPIDER ST1 users and the headset will be in Open Mesh (default: channel 1) initially.
Open Mesh
Channel Setting (Default: channel 1) in Open Mesh
Using the Button
- Enter into the Channel Setting.
- Navigate between channels.
(1 2 ••• 8 9 Exit 1 •••)
- Save the channel.
Using the Sena Motorcycles App
You can select the channel through the Sena Motorcycles App.
Group Mesh
Group Mesh is a closed group intercom function that allows users to join, leave, or rejoin a group intercom conversation without pairing each headset.
Creating a Group Mesh
Creating a Group Mesh requires two or more Open Mesh users.
- Users (You, B, and C) enter into Mesh Grouping to create a Group Mesh.
- When Mesh Grouping is completed, the users (You, B, and C) will hear a voice prompt on their headset as Open Mesh switches to Group Mesh.
Joining an Existing Group Mesh
One of the current users in an Existing Group Mesh can allow new users (one or more) in Open Mesh to join the Existing Group Mesh.
- One (You) of the current users in the Existing Group Mesh and new users (D and F) in Open Mesh enter into Mesh Grouping to join the Existing Group Mesh.
- When Mesh Grouping is completed, the new users (D and F) will hear a voice prompt on their headset as Open Mesh switches to Group Mesh
Enable/Disable Mic (Default: Enable)
Users can enable/disable the microphone when communicating in a Mesh Intercom.
Mesh Reach-Out Request
You (the caller) can send a request message to turn on the Mesh Intercom to nearby friends who have it turned off.
- If you want to send or receive a request message, you need to enable Mesh Reach-Out on the Sena Motorcycles App. ˞
- While your headset’s Mesh Intercom is on, you (caller) send a request message using the headset’s Button or the Sena Motorcycles App.
- Friends who receive the request message need to manually turn on their Mesh Intercom using the headset’s Button or the Sena Motorcycles App.
Reset Mesh
If a headset in an Open Mesh or Group Mesh resets the Mesh, it will automatically return to Open Mesh (default: channel 1)
Configuration Menu
Accessing the Configuration Menu
Navigating Between Menu Options
Execute Menu Options
Troubleshooting
Fault Reset
Note:
Fault Reset will not restore the headset to the factory default settings.