FUJIFILM INSTAX SQUARE Link™ Smartphone printer Guide
Before Use
Before using the printer, check the following
Supplied Accessories
- USB Type-C cable for charging (1)
- User’s Guide (1)
- 1 Year Limited Warranty (1)
The battery has not been fully charged at the factory. Before using the printer for the first time, be sure to fully charge the battery. The free INSTAX SQUARE LINK App will need to be downloaded and paired with your Smartphone before initial use.
Notes on Disposing of the Printer
A built-in lithium-ion battery is located inside this printer. When you dispose of the printer, follow your local regulations and dispose of it properly. For proper disposal in the United States at product end-of-life, please contact 1-800-800-3854 Option #1 INSTAX. For proper disposal in Canada at product end-of-life, please contact 1-800-461-0416. For proper disposal in Latin America at product end-of-life, please contact your local FUJIFILM distributor or dealer for disposal instructions. Do not attempt to remove the built-in battery. Injury may result.
Part Names
- Film ejection slot
- Function button
- Power button/LED1
- USB port cover
- Reset button2
- USB Type-C port
- Film door lock
- Film door3
Installing the INSTAX SQUARE LINK App
Please install the free INSTAX SQUARE LINK Smartphone App on your Smartphone before using the printer.
- If you are using an Android OS Smartphone, please search for the INSTAX SQUARE LINK Smartphone App in the Google Play Store and install it. *Requirements for Android OS Smartphones: Android Ver. 7.0 or higher with Google Play Store installed
- If you are using an iOS Smartphone, please search for the INSTAX SQUARE LINK Smartphone App in the App Store and install it. *Requirements for iOS Smartphones: iOS Ver. 12.0 or higher
- The INSTAX SQUARE LINK App may not be fully compatible with all versions and models of Smartphones.
Charging the Battery
Note that a USB AC adapter is not included, but is typically provided with your Smartphone or otherwise purchased separately. Connect the printer with a USB AC adapter (not included with the INSTAX SQUARE LINK printer) using the supplied USB Type-C cable, then connect the USB AC adapter to an indoor power outlet.
- You can print an image while charging is in progress.
- Charging time is approximately 80 to 120 minutes.
Charging status indication with the LED
When the printer is turned on:
Indication | Charging status |
LED lights up in white | Not charging or charging is completed |
LED flashes in white | Charging |
When the printer is turned off:
Indication | Charging status |
LED is turned off | Not charging or charging is completed |
LED flashes in green | Charging |
Check the charging status with your Smartphone when connected to the free INSTAX SQUARE LINK App.
Charging from a PC:
- Connect the printer and PC directly. Do not connect via a USB hub or keyboard.
- If the PC goes into sleep mode while charging, charging is discontinued. To continue charging, exit sleep mode and then reconnect the provided USB Type-C cable.
- The battery may not be able to charge depending on the specifications and settings or conditions of the PC.
Notes
- The battery has not been fully charged at the factory. Be sure to charge the battery before using the printer.
- The battery cannot be removed.
- For notes about the battery, see “Printer Care”.
Loading/Unloading the INSTAX SQUARE® Instant Film Pack
CAUTION Do not open the film door until you have used all of the exposures on your INSTAX instant film pack; otherwise, the remainder of the film will become exposed and turn white. Exposed instant film cannot be used to print INSTAX images.
- When you load the film pack, never press the two rectangular holes on the back of the film pack.
- Never use a film pack beyond its shelf life; otherwise, it may damage the printer.
Use FUJIFILM INSTAX SQUARE Instant Print Film only. The INSTAX MINI™ or INSTAX WIDE™ Instant Film Packs cannot be used in the INSTAX SQUARE LINK printer.
Loading the INSTAX SQUARE Instant Film Pack
- Slide and hold the film door lock and open the film door.
- Insert an INSTAX SQUARE instant film pack by aligning the yellow marks.
- Close the film door.
- Remove the black film cover that is ejected from the printer.
The INSTAX SQUARE LINK Smartphone Printer is designed for use with INSTAX SQUARE instant print film only.
Unloading a Used INSTAX SQUARE Instant Film Pack
- Slide the film door lock to open the film door.
- Grasp the rectangular holes on the film pack, then pull the film pack out from the printer. Properly dispose of the used film pack.
Turning on/off the Printer
Press and hold the Power button for approximately 1 second to turn the printer on or off. The LED lights up when the printer is turned on. If the printer remains idle without operation for 5 minutes, the printer turns off automatically.
Checking the Printer Status with the LED
You can check the printer status with the LED.
Color | LED status | Status |
Blue | Flashing | Firmware is being updated |
Purple | Flashing | Reprinting |
Yellow | Lights up for 3 seconds, then turns off | Low battery * If this continues even after charging, there may be a malfunction. In such cases, contact Fujifilm’s customer support team or a FUJIFILM authorized dealer. |
Yellow | Continuous flashing | Print error occurred Please check to make sure the film ejection slot is not jammed and the film door is securely closed. * If this continues to occur, contact Fujifilm’s customer support team or a FUJIFILM-authorized dealer for assistance. |
Connecting Your Smartphone and Printer and Printing
With the functions of the INSTAX SQUARE LINK Smartphone App, you can edit your favorite Smartphone images before printing by adding text, applying filters, and much more! See Page 4 on how to install the INSTAX SQUARE LINK Smartphone App or check out the following site: https://instax.com/square_link/
When Establishing a Connection for the First Time
- Press and hold the Power button for approximately a second to turn the printer on. The LED lights up.
- Start the downloaded INSTAX SQUARE LINK Smartphone App.
- Click through the below pop-up windows to set up the printer.
- Read the Terms of Use, check the [Agree] box, and tap the [Agree →] bar.
- Quick instructions are displayed. Read the instructions and tap [Let’s Play! →].
- Set up the Bluetooth connection between your Smartphone and the printer. [Bluetooth connection] can also be set in the process of printing.
- When a printer is detected, tap [Connect]. If multiple printers are detected, select the printer you would like to connect to from the list. Locate the printer’s identifier (device name) on the bottom of the printer. Make sure the printer is on during this step. If not, turn the printer on by pressing and holding the Power button for 1 second.
Note If your Bluetooth settings are switched off, tap [Please turn on Bluetooth] to put the Bluetooth settings on. - When the message is displayed, check the box and tap [PAIR].
- When a printer is connected, tap [Close]
- You are now ready to use the printer. To select an image to print, tap the [Simple Print] button on the home screen and select an image from the photos on your Smartphone.
- To edit your image for printing, click on the below editing options at the bottom of the screen before printing.
Enters text or attaches a sticker to the printed image. Zooms in/out or rotates the printed image. Applies a filter on the printed image. Adjusts the brightness of the printed image. - Tap
or swipe the image up on the screen to print your image. After a slight transmission delay (roughly 12 seconds), the printer starts printing. You can also select the number of images to print during image transfer.
- When your photo has been ejected (the printer stops making a sound), take it out of the printer by grasping the edge of the photo. Your instant photo will develop in roughly 90 seconds. Confirm the number of images remaining in your loaded INSTAX SQUARE instant film pack on the Smartphone App screen.
Taking a Photo with the INSTAX Camera Mode in the App
You can take a photo using the INSTAX Camera Mode featured in the App. You can use flash, switch between the front and rear cameras, use a self-timer or add the date to your photo. For details, see the “FAQ” of the INSTAX SQUARE LINK App.
- Select INSTAX Camera Mode.
- Take a photo.
Specifications
Recording method | 3-color exposure with OLED |
Film used | FUJIFILM INSTAX SQUARE Instant Film (sold separately) |
Number of films | 10 films/pack |
Image size | 2.4 in. x 2.4 in./62 mm × 62 mm |
Exposure pixel count | 800 × 800 dots |
Exposure resolution | 12.5 dots/mm (318 dpi, 80 μm dot pitch) |
Exposure gradation | RGB gradation of 256 colors |
Interface | Bluetooth Ver. 4.2 (BLE) |
Printable image format | JPEG, PNG, HEIF, DNG |
Print transmission time | Approximately 12 seconds for transmission and to start printing *Image development time approximately 90 seconds |
Possible number of printed images | Approximately 100 (from full charge; number of prints depends on the usage conditions) |
Power supply | Lithium ion battery (internal type: not removable) |
Charging time | Approximately 80 to 120 minutes (depending upon environment temperature at time of charging) |
Power consumption | Approximately 3 W |
Operating environment | Temperature: 41°F to 104°F (5°C to 40°C) Humidity: 20% to 80% (no condensation) |
Main unit dimensions | 4.1 in. × 1.5 in. × 5.0 in./105 mm × 37.5 mm × 127.5 mm (excluding projecting parts) |
Main unit weight | Approximately 0.52 lbs / 236 g (excluding film pack) |
Supplied accessory | USB cable (Type-C, Length: 11.8 in./30 cm) |
Troubleshooting
Please check the following items before considering a problem to be a malfunction. If the problem persists even after taking action, please contact the Fujifilm service center for repair or visit the website below. https://instax.com/square_link/en/support/faq/ If the following problem occurs…
Problem | Possible causes and solutions |
I cannot turn on the printer. | • The battery may not be charged. Please charge the printer. • You did not press the Power button long enough. Press and hold the Power button for approximately 1 second. |
The battery loses its charge quickly. | If you use the printer in a very cold environment, the battery will drain quickly. Please keep the printer warm before printing. |
The printer turned off during use. | The battery level may be low. Please charge the printer. |
Charging does not start. | Make sure that the USB power adapter plug is properly connected to the power outlet. |
It takes too long to charge. | At low temperatures, charging may take longer than what is normally experienced. |
Charging does not start or prematurely stops. | Charge the battery in a temperature range of 41°F to 104°F (5°C to 40°C). If you cannot charge the printer in this range, contact your FUJIFILM authorized dealer or Fujifilm’s customer support team. |
The printer does not work properly. | • There may be a temporary malfunction. Please press the reset button. If it still does not work properly, please contact our repair service center for repair. • The battery may not be charged. Please charge the printer. |
The film pack does not load or does not load smoothly. | • Please use FUJIFILM INSTAX SQUARE instant print film only (INSTAX MINI or INSTAX WIDE instant print film cannot be used). • Align the yellow mark on the film pack with the printer alignment mark (yellow) and load it in accordance with the loading instructions above and on the film pack. |
The film does not unload. | • The film may be misaligned due to shock such as vibration or dropping. Please load a new film pack. • If the film is jammed, turn the printer off and turn it on again. If the problem persists, remove the jammed film and then load a new film pack. |
Some or all of the finished prints are white. | Do not open the film door until you have used all of the exposures on your INSTAX instant film pack; otherwise, the remainder of the film will become exposed and turn white. Exposed instant film cannot be used to print INSTAX images. |
The image does not fully develop. | • Do not shake, bend, fold or hold the image immediately after it is printed. • Do not obstruct the film ejection slot. |
I cannot reprint images. | Turn the printer on, select the desired Smartphone photo, and try again. |
IMPORTANT SAFETY NOTICE
- Do not use this product and its accessories for a purpose other than taking instant photos.
- This product has been designed with safety in mind, but please read the following safety precautions carefully and then use the product correctly.
- After reading this User’s Guide, be sure to keep it in an easy-to-access place where you can refer to it whenever necessary.
WARNING
Never attempt to take this product apart. You may be injured. Do not touch this product if the inside of it becomes exposed due to dropping, etc. This product has high-voltage circuitry that may cause injury or electric shock. If you notice anything abnormal, such as the camera (batteries) becoming hot, emitting smoke, or making a burning smell, remove the batteries immediately. Fire or burns may occur (be careful not to burn yourself when removing the batteries)
Never take flash photographs of people riding bicycles, driving cars, skateboarding, riding a horse, and the like. The flash can be startling, distract, frighten animals, and otherwise cause an accident. If you drop the camera in water or if water or a piece of metal or other foreign object gets inside, remove the batteries immediately. Heat generation or fire may occur. Do not use this camera in places where there is flammable gas or near-open gasoline, benzine, paint thinner, or other unstable substances that can give off dangerous vapors. Failure to do this could result in an explosion or fire. Do not disassemble, heat the batteries, or expose the camera or batteries to a fire or an electrical short circuit. The batteries may rupture.
Handling
Handling of Camera
- The camera is a precision instrument, so do not get it wet, drop it, or subject it to shock. Also, do not place the camera where it will be exposed to sand, dirt, or dust particles.
- Do not use solvents such as thinner or alcohol to wipe off the dirt.
- Any dirt or dust in the film chamber may affect the finish of the print. Do not allow the film chamber to get dirty or dusty.
- . Do not leave the camera in a closed motor vehicle, on the beach, or in another hot or humid place for any period.
- Gas-containing moth repellent may adversely affect the camera and INSTAX instant film. Avoid keeping the camera and INSTAX instant film in a chest of drawers, etc. with mothballs.
- The operating temperature range of this camera is 41°F (+5°C) to 104°F (+40°C).
- When taking photos, please be careful not to violate the rights of others, such as copyright, image rights, and privacy, or violate public order. Any act that violates the rights of others, is contrary to public order or morals or constitutes a nuisance, may be subject to legal penalties and claims for damages.
- This camera is for general household use. It is not suitable for commercial photography and other applications where a large number of prints are needed or involved.
- Before using a commercially available strap, check the strength of the strap. Be especially careful when using a strap for mobile phones and Smartphones because such straps are made for lightweight devices.
- If you are not using your camera for a long period, unload the batteries and keep it where it will avoid heat, dust, and moisture.
Cautions During Printing
INSTAX MINI Instant Film and Photos
For details on the handling of film and photos, see the instructions written on the FUJIFILM INSTAX MINI instant film box.
- Keep the film in a cool place. In particular, do not leave a film in an extremely hot place, such as in a closed motor vehicle, for a long period.
- Do not tear, cut, or make a hole in instant film. Do not use film that is damaged.
- Use film as soon as possible after inserting it in the camera.
- If the film has been kept in a place where the temperature is extremely low or high, allow it to become accustomed to a normal temperature before taking pictures.
- Use film before the film expiration date referenced on the package.
- Avoid airport-checked luggage inspection and other strong X-ray exposure. The unused film is susceptible to the effect of fogging, etc. We recommend that you carry film onto aircraft in carry-on luggage (check with the relevant airport for more information).
- Avoid exposing your instant photos to strong light, and store them in a cool and dry place.
- Do not cut, peel apart, or puncture new or newly used instant print film. The film contains a small amount of highly caustic paste; the paste can remain active for up to 10 minutes after an instant photo is taken. Be especially careful not to let infants or pets put the film into their mouths. Paste should not come into contact with skin or clothes.
- If you accidentally touch the paste of unused INSTAX MINI instant print film, immediately wash it off with plenty of water. If the paste comes into contact with the eyes or mouth, wash the area and then seek medical attention. The alkalinity of INSTAX MINI instant print film will weaken approximately 10 minutes after the instant photo is ejected from the camera.
- Do not store instant photos in a sealed bag, as this may cause discoloration.
Cautions on Handing of Instant Film and Finished Photos
For details, see the instructions of FUJIFILM INSTAX MINI instant film
Notes on Disposing of the Camera
Proper Disposal – US, Canada, and Latin America Disposal of Electric and Electronic Equipment in Private Households Disposal of used Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
This symbol on the product, in the manual in the warranty, and/or on its packaging indicates that this product shall not be treated as household waste. Instead, it should be taken to an applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to the environment and human health, which could otherwise be caused by inappropriate waste handling of the product. The recycling of materials may help to conserve natural resources.
For more detailed information about recycling this product, please contact your local city recycling office, your household waste disposal service, or the authorized Fujifilm dealer from which you purchased the product. For proper disposal in the United States at product end-of-life, please contact 1-800-800-3854 Option #1 INSTAX. For proper disposal in Canada at product end-of-life, please contact 1-800-461-0416. For proper disposal in Latin America at product end-of-life, please contact your local FUJIFILM distributor or dealer for disposal instructions.
Bluetooth® Devices: Cautions
IMPORTANT:
Read the following notices before using the product’s built-in Bluetooth transmitter
- Use only as part of a Bluetooth network. Do not use in applications requiring a high degree of reliability, for example in medical devices or other systems that may directly or indirectly impact human life. When using the device in computer and other systems that demand a greater degree of reliability than Bluetooth networks, be sure to take all necessary precautions to ensure safety and prevent malfunction. FUJIFILM Corporation and its affiliates do not accept liability for damages resulting from unauthorized use.
- Use only in the country in which the device was purchased. This device conforms to regulations governing Bluetooth devices in the country in which it was purchased. Observe all location regulations when using the device. FUJIFILM Corporation and its affiliates do not accept liability for problems arising from use in other jurisdictions.
- Wireless data (images) may be intercepted by third parties. FUJIFILM Corporation and its affiliates are not responsible for intercepted transmissions, or for unintended image uses.
- Do not use the device in locations subject to magnetic fields, static electricity, or radio interference. Do not use the transmitter in the vicinity of microwave ovens or in other locations subject to magnetic fields, static electricity, or radio interference that may prevent the reception of wireless signals. Mutual interference may occur when the transmitter is used in the vicinity of other wireless devices operating in the 2.4 GHz band.
- The Bluetooth transmitter operates in the 2.4 GHz band. The maximum radio-frequency power is 8.28 mW.
- This device operates on the same frequency as commercial, educational, and medical devices and wireless transmitters. It also operates on the same frequency as licensed transmitters and special unlicensed low-voltage transmitters used in radiofrequency identification tracking systems for assembly lines and in other similar applications.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For more information, access the website below. https://instax.com/square_link/en/spec/
CAUTION
This device has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the product and the receiver.
- Connect the product to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION
Changes or modifications not expressly approved by Fujifilm responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard employs a unit of measurement known as the Specific Absorption Rate or SAR.
The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Notes on the Grant To comply with Part 15 of the FCC Rules, this product must be used with a Fujifilm-specified USB Type-C cable.