Corsair ST100 RGB Premium Headset User Manual

Corsair-logo

Corsair ST100 RGB Premium Headset

Corsair-ST100-RGB-Premium-Headset-product

PACKAGE CONTENTSCorsair-ST100-RGB-Premium-Headset-fig-1

  • CORSAIR ST100 RGB headset stand
  • USB 3.1 cable, 1.8m (power & data)
  • Quick start guide

PRODUCT DETAILCorsair-ST100-RGB-Premium-Headset-fig-2

  • RGB LED (1 zone)
  • USB 3.1 port (Gen 1)
  • RGB LEDs (8 zones)
  • 3.5mm headset jack
  • USB 3.1 port (Gen 1)
  • USB to PC Micro-B port (power & data)

GETTING STARTED

Connect the included USB 3.1 cable to the USB to PC Micro-B port on the back of the ST100 RGB headset stand. Connect the opposite end to a USB port on your PC. After connecting to your PC, we recommend installing the CORSAIR Utility Engine (CUE) to ensure you have the latest firmware and drivers.

USB 3.1 PORTS
Two high speed USB 3.1 (Gen 1) ports are included. These ports are
backwards-compatible with all USB 2.0 devices.

Note: In order to realize USB 3.1 performance, the USB port on your PC must also support USB 3 or higher specifications. Otherwise, performance is limited to the USB specifications of your PC.

3.5MM HEADSET JACK
A 3.5mm headset jack provides compatibility with any headset or headphone that has a 3.5mm analog connector. 7.1 virtual surround sound can be enabled using the CORSAIR Utility Engine (CUE).

RGB LIGHTING CONTROL
A total of 9 fully customizable RGB LED zones are available using the CORSAIR Utility Engine (CUE).

CORSAIR UTILITY ENGINE

Go to corsair.com/support/downloads to download the CORSAIR Utility Engine (‘CUE’) Software. Using the CUE software will enable the full feature set of the ST100 RGB headset stand.

Note: if the stand is used without software, some features will be disabled.

  • Install the software on a PC running Windows 10, Windows 8, or Windows 7.
  • After installation is complete, reboot your PC, and launch CUE.

You can use it to:

  • Choose your RGB color preference and light intensity
  • Select and customize audio equalizer (EQ) settings
  • Set 7.1 surround sound on or off

The software’s built-in documentation explains how to use the ST100 RGB headset stand’s features in greater detail.

Contact Us

© 2020 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured. 49-002296 AB

Download Link

https://res.cloudinary.com/corsair-pwa/image/upload/corsairmedia/sys_master/productcontent/ST100_RGB_QSG.pdf

Leave a Reply