Invicta RONDA Startech 271 Watch User Manual

Invicta RONDA Startech 271 Watch User Manual

Ronda is a supplier of watch movements including their operating instructions. Please refer to the watch retailer, service center, or manufacturer, should you have any questions regarding the watch. All relevant contact information can be found in your sales and/or guarantee documents.

Description of the display and control buttons

Chronograph: Basic function
(Start / Stop / Reset)

Example:

1. Start: Press push-button A.
2. Stop: to stop the timing, press push-button A once more and read the 3 chronograph counters: 4 min/38 sek/ 7⁄10 sec
3. Zero positioning: Press push-button B. (The 3 chronograph hands will be reset to their zero positions)

Chronograph: Accumulated timing

1. Start: (start timing)
2. Stop: (e.g. 15 min 5 sec following 1)
3. Restart: (timing is resumed)
4. Stop:
5. Reset: The 3 chronograph hands are returned to their zero positions.

Chronograph: Intermediate or interval timing

Example:

1. Start: (start timing)
2. Display interval: e.g. 10 minutes 10 seconds (timing continues in the background)
3. Making up the measured time: (the 3 chronograph hands are quickly advanced to the ongoing measured time).
4. Stop: (Final time is displayed)
5. Reset: The 3 chronograph hands are returned to their zero position

Adjusting the chronograph hands to zero position

Example:
One or several chronograph hands are not in their correct zero positions and have to be adjusted (e.g. following a battery change).

1. Pull out the crown to position III (all 3 chronograph hands are in their correct or incorrect zero position).
2. Keep push-buttons A and B depressed simultaneously for at least 2 seconds (the center stop-second rotates by 360° corrective mode is activated).

Setting the time

1. Pull out the crown to position III (the watch stops).
2. Turn the crown until you reach the correct
   time 8:45.
3. Push the crown back into position I.

Setting the date (quick mode)

1. Pull out the crown to position II (the watch continues to run).
2. Turn the crown until the correct date appears.
3. Push the crown back into position I

Please note
The date can be changed during the date-changing phase between 9:00 PM and 12:00 PM; please note that the date must be set to the date of the following day as in this case the automatic date changing does not occur at midnight.

Setting the date, weekday, and time

Example:

• Date/time on the watch:
• Present date/time: 

Pull out the crown to position III (the watch stops).

1. Turn the crown until yesterday’s weekday WE appear.
2. Push the crown to position II.
3. Turn the crown until yesterday’s date appears 22
   

Please note 
To set your watch to the exact second, please refer to the chapter entitled «Setting the time». ** Please observe the AM/PM clock rhythm.

REFERENCE LINK

https://invictawatch.com/

https://cdn.invictawatch.com/www//media_imports/manuals/201601/271/271_ba5040_d_5040_ee.pdf