Cobra Power Station 200W User Manual
Thank you for purchasing the Cobra Power Station 200W The Cobra Power Station 200W is ideal for charging and powering portable devices, electronics, and small appliances for cross-country professional drivers, travelers, campers, and RV enthusiasts, or for when a power outage occurs. Count on Cobra for Power When You Need It.
Power Station 200W Features
- A. Area Light
- B. (2) 110V Outputs
- C. LCD Display
- D. DC Switch
- E. 12V Port
- F. LED Light/Display Switches
- G. 110V Switch
- H. (2) USB-A Outputs
- I. Fast Charge Switch
- J. USB-C Output
- K. Input Charging Port
- L. 12V Charger
- M. AC Adapter and Cable (2 Parts
Not Shown – LED Flashlight, Side Panel.
Charging
Recharging the Power Station
Before use or storage, plug your Power Station 200W into an AC outlet until it is fully charged. If the LCD display indicates the unit is below 20% capacity, recharge it as soon as possible.
Flashlights LED
Flashlight
- To turn on the LED flashlight, press the LIGHT button on the control panel. After the flashlight has been on for more than two seconds, press the LIGHT button again to turn the LED flashlight off.
- To cycle between the three modes on the LED flashlight (solid, strobe, SOS), after turning on the flashlight, press the LIGHT button to cycle between each mode until the desired mode is selected. Area Light
- To turn on the area light, press and hold the LIGHT button on the control panel until the area light turns on. To turn off this light press and hold the LIGHT button until the area light turns off.
Input Charging Light
In addition to the LCD display on your power station, there is an input charging light above the input charging port to help provide additional feedback for when you should recharge your power station: Blinking Green: When your power station is plugged in and recharging, the input charging light will blink green to indicate that the unit is actively charging. Solid Green: When the power station is fully charged the input charging light will change from blinking green to solid green until the charging cable is removed. Solid Red: When the battery charge drops below 20% the input charging light will illuminate solid red. Recharge your power station as soon as possible in order to keep the battery healthy.
Frequently Asked Questions
How do I know if my 110V device will work with the Power Station 200W?
You will need to check the amount of power your device requires. To be compatible with the Power Station 200W you should use devices that require less than 200W. See below for some examples of typical products and their average power requirements.
Can I run sensitive electronics and medical equipment with this device?
The Power Station 200W is designed with a “Pure Sine Wave” output, a waveform identical to the AC power you use inside your home. Rely on Pure Sine Wave to safely operate your sensitive electronics.
