Jlab Studio Wireless Earbuds
FIRST TIME SETUP: BLUETOOTH PAIRING
- Turn on the Bluetooth in your device settings.
- When the Studio Wireless Headphones are powered off, press and hold the Power Button for approximately 8 seconds. Fast blinking red and blue light indicates searching for Bluetooth device.
- Select “JLab Studio” in your device settings to connect.
PAIRING NEW / ADDITIONAL DEVICES:
Turn OFF Bluetooth on your previously paired device and turn ON Bluetooth on new device. Repeat FIRST TIME STEUP process for new devices.
- Notes:
Bluetooth is a wireless radio technology, which means it is sensitive to objects between the headphone and the connected device. The headphone is designed to be used within 33 feet (10 meters) of a connected device, with no major objects in between (walls, etc.). - Once successfully connected, the headphone will memorize your device and automatically pair when turned on in the future. Only one device may be connected at a time. To pair a different device, first unpair the current one through its Bluetooth settings.
- If for any reason Bluetooth connection is lost, manually reconnect your Bluetooth device.
BUTTON FUNCTIONS
CHARGING
Note: For optimum performance, charge overnight with Micro USB cable prior to using. Allow about 3 hours to fully charge. Connect the Micro USB (included) to the headphone and connect the USB into a computer or AC adaptor (not included). Make sure the USB connection has a power output source. Solid red light indicates the headphone is charging. Solid blue light indicates charging is complete. Note: Studio Bluetooth can still be used while charging. Power on and connect to device after charging occurs. 
TROUBLESHOOTING
Connection failure or earbuds disconnected from each other (Manual Reset)
- Keep the earbuds in the charging case and forget “JLab GO Air” from your Bluetooth device settings.
- Quick tap 7x on one earbud in charging case. Earbud blinks blue 3 times.
- Quick tap 7x on other earbud in charging case. Earbud blinks blue 3 times.
- Take both earbuds out of the charging case.
One earbud will be solid white and other will blink blue/white indicating ready to pair to your device.
CAUTIONS
- Avoid extreme heat, cold, and humidity.
- Avoid dropping or crushing the earbuds.
- Wax may build up in the earbud tips, lowering the sound quality.
- Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
- If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
- If you experience regular discomfort while using this product, discontinue use and consult your physician.
- We recommend you treat your earbuds as you would a nice pair of sunglasses and keep them in safe location when not in use.
YOUR WARRANTY
YOUR WARRANTYAll warranty claims are subject to JLab Audio authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.
CONTACT US
Reach out to us at support@jlabaudio.com or visit jlabaudio.com/contact
Download Pdf Link
https://cdn.shopify.com/s/files/1/0240/9337/files/Studio_Wireless_Manual.pdf?v=1585075989
