HUAWEI Super Charge Wall Charger (Max 66 W) User Manual featured img

HUAWEI Super Charge Wall Charger (Max 66 W) User Manual

HUAWEI logo

HUAWEI Super Charge Wall Charger (Max 66 W) User Manual

HUAWEI Super Charge Wall Charger (Max 66 W) User Manual prduct img

Quick Start Guide

Product Image

HUAWEI Super Charge Wall Charger (Max 66 W) User Manual fig 1

Product modelP0006
Rated input voltage12 V DC to 24 V DC
USB 1 output (orange)5 V/3 A,10 V/4 A, 11 V/6 A (Max)
USB 2 output (black)5 V/2 A
 

Cover material

Aluminum alloy body and heat and fire-resistant PC for the USB cover
Working temperature-10°C to +40°C

Instructions

  • To ensure product safety, the car charger is equipped with an intelligent detection chip and must be connected to a Huawei original cable (able to withstand 6 A or higher current) and a device that supports the 11 V 6 A protocol, to achieve super-fast charging (11 V, 6 A maximum).
  • The female socket of the cigarette lighter or power port may vary with the vehicle model and may not match the car charger. The recommended inner diameter of the female socket or power port is 20.7 mm to 21.5 mm.
  • For ITE/AV use only.

Safety Information

  • Avoid allowing the product to take heavy knocks during use.
  • Do not disassemble or take apart the product.
  • Avoid allowing the product to be left in direct sunlight.
  • Please only use the device within its approved operating range of -10°C to +40°C, and only allow it to be exposed to temperatures within its approved storage range of -40°C to +70°C. Extreme heat or cold may damage the device.
  • The device is not a toy. Children should only use the device when
    supervised by an adult.
  • Avoid submerging or leaving the product in moist environments.
  • Do not use chemicals, powders, or strong detergents to clean the product.
  • Connecting the product with unapproved or incompatible data cables is unadvised, as this presents a fire or explosion risk.
  • Do not place the device directly above or within the reach of vehicle airbags. This is due to the fact that in the event of airbag deployment, the device could have a strong impact and potentially cause severe injury to people inside the vehicle.
  • Avoid dusty, damp, or dirty environments. Avoid magnetic fields. Using the device in these environments may result in circuit malfunctions.
  • For safe and reliable charging, do not use an onboard diagnostics (OBD) port, a cigarette lighter expansion device, or a converted port to supply power to the car charger. Otherwise, power supply faults may occur.

Disposal and Recycling Information

The crossed-out wheeled-bin symbol on your product, battery, literature, or packaging reminds you that all electronic products and batteries must be taken to separate waste collection points at the end of their working lives; they must not be disposed of in the normal waste stream with household garbage.

It is the responsibility of the user to dispose of the equipment using a designated collection point or service for separate recycling of waste electrical and electronic equipment (WEEE) and batteries according to local laws. Proper collection and recycling of your equipment help ensure electrical and electronic equipment (EEE) waste is recycled in a manner that conserves valuable materials and protects human health and the environment, improper handling, accidental breakage, damage, and/or improper recycling at the end of its life may be harmful to health and environment.

For more information about where and how to drop off your EEE waste, please contact your local authorities, retailer, or household waste disposal service or visit the website http://consumer.huawei.com/en/

Reduction of Hazardous Substances
This device and its electrical accessories are compliant with local applicable rules on the restriction of the use of certain hazardous substances in electrical and electronic equipment, such as EU REACH, RoHS and Batteries (where included) regulations. For declarations of conformity about REACH and RoHS, please visit our website http://consumer.huawei.com/certification.

FCC statement

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Consult the dealer or an experienced radio/TV technician for help.

REFERENCE LINK

https://consumer.huawei.com/en/accessories/supercharge-wall-charger-max-66w/

Leave a Reply