Hifiman Svanar Wireless Noise Cancelling Earphones Owner’s Guide
Accessories
Power On/Off
The earbuds will instantly power on when removed from the charging case. The earbuds will automatically start recharging when returned to the charging case, and turn off when fully charged.
Pairing
Use Both Earbuds
- To pair with a source device, remove the earbuds from the charging case, at which point the earbuds will enter pairing mode.
- Open the Bluetooth function menu on your device and select HIFIMAN SVANAR WIRELESS. Once paired, you will hear “Connected.”
Important:
You have 3 minutes to connect the earbuds to your device, otherwise the earbuds will exit and automatically power off .
Use Left Earbud Only
Leave the right earbud in the charging case while removing the left earbud, at which point it will automatically enter single-sided mode. The left one taken out from the charging case will enter one-sided mode automatically. To return to stereo, simply remove the right earbud from the charging case.
Use Right Earbud Only
Leave the left earbud in the charging case while removing the right earbud, at which point it will automatically enter single-sided mode. The right one taken out from the charging case will enter one-sided mode automatically. To return to stereo, simply remove the left earbud from the charging case.
Forced Reconnection
When wearing both earbuds, press and hold both earbuds for 3 seconds at the same time to forcibly cancel the last connected device. After canceling the connection, the headset will enter pairing mode with a voice prompt: “Pairing.” Return the earbuds to the charging case, press and hold the hard key of the charging case for 3 seconds while the cover is open. The red and green lights on the charging case will flash and enter the forced pairing mode. The mobile phone will find and connect with SVANAR WIRELESS. After the pairing is completed, the green light in the charging case flashes once, for one second, and turns off
Delete Pairings and Restore Factory Settings
Return the earbuds are placed in the charging case, then re-open the charging case and press and hold the hard key for 10 seconds. When the reset is completed, the green light in the charging box will flash.
Calls & Music
Calls
Answer call
Double-click either earbud twice to answer the call
End call
While in a call, double -click either earbud twice to end the call
Reject call
Press and hold either earbud for ~3 seconds to reject the call Long press the right earbud (R) for ~3 seconds to turn on the voice assistant (Note: the device needs to support the Voice Assistant function.)
Music
To Play/Pause Touch the right/left earbud to pause the track, and touch it again to continue playing the file or stream. Playing is paused when the earbud leaves the ear, and resumes when the earbud is put back on. To rewind to the previous track With earbuds in operation, double-click the right earbud/left earbud. To Skip to the Next Track With earbuds in operation, triple-click the right earbud/left earbud.
Due to the complexity of the electromagnetic environment, the default LDAC high-resolution Bluetooth connection format may freeze or disconnect due to insufficient bandwidth. If this occurs, enter Settings on your device and manually set the Bluetooth format to AAC or SBC. In this mode, the problem of lag/disconnection will be improved, but the sound quality might be less impactful.
Mode Switch
Noise Cancellation/HIFI Mode/ Transparency Mode
Only when wearing both earbuds: The initial mode is High Fidelity when SVANAR Wireless is turned on. Press and hold the left earbud for 3 seconds to switch to Noise Cancellation mode, which is accompanied by a voice prompt: “ANC ON.” Press the left earbud for 3 seconds to switch to the Transparency mode, which is accompanied by a voice prompt: “Transparency.” Press the left earbud for 3 seconds to switch to High Fidelity mode, accompanied by a voice prompt: “High Fidelity.”
Note: When using a single earbud, the current mode remains unchanged, and does not support mode switching between Noise Cancellation /High Fidelity /Transparency. When in Noise Cancellation mode, the microphone is no longer picking up for noise cancellation effect. When both earbuds are worn, SVANAR Wireless will automatically restore the connection and mode-switching function.
Charging
Charge the Earbuds
Low Battery Alert When the battery falls below 10% power, you will hear the “Low battery, please charge” prompt every 2 minutes. Return the earbuds to the charging case . The headset will automatically shut down after it is fully charged.
When the charging case is opened, there are no earbuds in the case and the inner light is not on.
Charge the Charging Case
Plug the charging cable into the charger port or place the SVANAR Wireless on a wireless charging plate to charge the charging case and earbuds. When charging, the Indicator Light on the charging box remains illuminated, indicating the battery status of the charging case.
Specifications
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without RF striction.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital, pursuant to Part 15 or the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may casue harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
HIFIMAN Limited Warranty
Svanar Wireless is warrantied for a period of 18 months beginning with the original date of purchase. If you join the official HIFIMAN
group on Facebook, your product warranty will be extended for an additional six months. Please contact HIFIMAN customer service if you need any assistance. The dated sales or delivery receipt is your proof of purchase. You may be required to provide proof of purchase as a condition of receiving warranty service so please keep it handy
DOWNLOAD PDF LINK
