Airties SVC WiFi Extender User Manual

Airties SVC WiFi Extender User Manual

You need to have AT&T Internet service for your new Wi-Fi extender to work. Check the compatibility with your Wi-Fi gateway at att.com/wifiextender The extender needs to be in the room next to the gateway during setup.

The Smart Home Manager app

Control and manage your home Wi-Fi network with the Smart Home Manager app. Troubleshoot, check your WiFi connection strength and manage devices from pretty much anywhere.

1. Download the Smart Home Manager app from your app store or go to att.com/smarthomemanager.
   
   For quick setup, open the camera on your smartphone and hold the camera over the QR code for a few seconds.
2. Sign in with your AT&T user ID and password. Need help? att.com/shmhelp.
   
3. Select NetworkHome Network HardwareAdd Extender. Once you see the SOLID WHITE light, you’re all set.

Connect with ethernet

You need to have AT&T Internet service for your new Wi-Fi extender to work. Check the compatibility with your Wi-Fi gateway
at att.com/wifiextender The extender needs to be in the room next to the gateway during setup.

1. Attach the extender to the gateway by connecting one end of the YELLOW Ethernet cable to one of the YELLOW Ethernet ports on the back of the gateway. Attach the other end of the cable to any one of the YELLOW Ethernet ports on the back of the extender.
   Tip: Make sure the Ethernet cable is firmly connected. Once both ends are properly connected, the Ethernet port LED will turn SOLID GREEN. After the extender has been paired and the front LED is SOLID WHITE, you can connect another device by Ethernet.
2. Connect the power supply to the extender and plug it into an electrical outlet (not controlled by a light switch). The power jack LED on the back of the extender should turn SOLID GREEN. Once you see the SOLID WHITE light on the front of the extender indicating you’re paired, you’re all set.
   
   Tip: The power light should turn GREEN within one second and the extender front light will begin to blink WHITE within 5 seconds. Then, it will begin to boot.
3. Unplug the extender and move it to the room you want the extender in.

Troubleshooting and tips

Do not place the extender on the floor. Visit att.com/extenderguide to help detect the best placement for your extender. Check if your extender is working.

Paired and functioning (SOLID WHITE light)

Troubleshooting

Check all cables and cords and reboot the extender using the reset button on the back.

REFERENCE LINK

https://www.att.com/support/smallbusiness/article/smb-internet/KM1320351/