Otium T10 Wireless Car MP3 Player User Manual

Table of contents show

Otium T10 Wireless Car MP3 Player User Manual prduct img

Plugging the device into the car cigarette lighter, then it will turn on automatically; when it is in a working state, the screen will display the voltage of the car battery and monitor the car battery at any time.
Noise and wind are suppressed by CVC technology to create full duplex sound quality.
Support mobile’s A2DP function. Music can be played directly while the mobile phone is connected.
Mobile phones can be connected automatically when the device turns on.
Support an external TF card, which can play music files in MP3/WMA format.
Integrated car charger function and its output is 5V/2.1A, which is available for charging handheld devices.

Operation Instructions
Power-On

This device is equipped with a built-in Wireless chip, which can connect to other handheld Wireless devices.
The pairing state will be activated automatically when the device is powered on with the blue light flashes. Then you can search wireless model “T10” with your phone and click to connect it.
This device has a memory function. It will automatically connect to the previously connected devices when powered on again.
If you want to remove the memorized devices, please press and hold the Frequency button to remove them.

Frequency and Volume Adjustment

This device supports 206 frequency channels from 87.5MHz to 108MHz. Press the CH button to activate the frequency setting menu, rotate ” ” or use ” ” to set the frequency channel. Press and hold the button for quick setting, or press and immediately release the button for setting with 0.1MHz per interval. After your setting is completed, press and immediately release the CH button to quit the menu. If there is no operation in 2 seconds, the device will quit the menu automatically.
Adjust the volume by the key of ““

Play Music from TF card I U disk

Insert the TF card / U disk into the device, it will automatically detect and play the MP3/WMA format music in the TF card.
. Plug the U disk into the device’s USB port, it will automatically detect and play the MP3/MA format music in the U disk.

When the device is playing music from the TF card or U disk, please press and immediately release “” button to pause the music, and then press and immediately release the “ ” button to play the music again.
When the device is playing music from the TF card or U disk, please press and immediately release ” “or” ” button to select the previous or next song.

Once it connects successfully, music can be transferred from the phone to the car stereo.
You can control Volume +/ -, Play/Pause, and Previous/Next song through both your phone and the device.

AUX Input/Output

AUX Input: This device supports the Line-in function, which can play music from MP4, CD, etc. via the 3.5mm AUX cable.
AUX Output: It can output audio to the speaker, car stereos, and portable earphones through the 3.5mm AUX port by an AUX cable.

Otium T10 Wireless Car MP3 Player User Manual fig 1

Wireless

First of all, a blank FM channel must be chosen for the car radio, then the frequency of T10 should be adjusted to the same as the frequency of the car radio.
After a long time of use, your car speaker may have some troubles. Therefore, please don’t turn up the car speaker’s volume to maximum to avoid static and distortion effectively.
When the device is out of use for a long time, please pull it out of the cigarette lighter. When used again, it should be inserted into the cigarette lighter after the car starts to avoid high-voltage damage.