Yobola T2 Pro Waterproof Wireless Earbuds User Manual

Yobola T2 Pro Waterproof Wireless Earbuds User Manual

Product description

How to wear

Gently insert the headset into the cochlea and adjust it to a proper angle.
(L for left earphone, R for right earphone)

Charging

1. Headset charging: put the headset back into the charging box and close the cover to charge the headset.
   1. Charging: Red light on.
   2. Fully charged: Red light off.
2. Charging of the charging box: connect USB charging cable to charge.
   1. Charging: White light flash.
   2. Fully charged: White light on.

Power on / off

1. Power on:
   A. Take out the earphones from the charging box, and the headset will turn on automatically.
   B. Press and hold the headset multifunction button for 5 seconds.
2. Power off:
   A. put the headset into the charging box and close the cover, and the headset will turn off automatically.
   B. When music is not playing, press the headset multifunction button for 5 seconds.

Headset Pairing

1. After the two headsets are taken out of the charging box or turned on, the left and right headset will pair automatically and enter the connection mode with the device.
2. Turn on Bluetooth of the phone and search for Bluetooth devices.
3. Find the Bluetooth device: T2 Pro and connect it, and there will be a prompt tone after the successful connection. (Note: if T2 Pro cannot be found, please confirm whether the headset is turned on or you can turn off the Bluetooth of the mobile phone
   and then turn it on again)

Product Parameters

• Model: T2 Pro
• Bluetooth version: V5.1
• Wireless distance: ≥ 10m (in barrier-free environment)
• Input voltage: DC5V
• Headset battery: 40mAh
• Battery of charging box: 300mAh
• Usage time: about 4-5H
• Charging time of charging box: about 1-2H

Attention

1. Please use it in a room without wall-like barriers; otherwise it may cause sound stuck / interruption.
2. The distance between the headset and the device should not be too far; otherwise the sound may be stuck / interrupted.
3. If there are a lot of Wi Fi and 4G signals around or other high-power electrical appliances when using, it is easy to cause
   sound stuck / interruption.

FQA

1. Q: How to solve the problem that only one headset can listen to music?
   A: Put the two headsets back into the charging box and close the cover, take them out again to check whether the binaural
   mode is restored, if the earphones have not recovered, you can clear the pairing information to solve the problem.
2.  Q: What should I do if the phone says “cannot connect”?
   A: Delete the pairing record on the phone, and then search and connect again to solve it

Warranty

We offer one year warranty, please feel free to contact us if you have any issues. We would reply all your requirements via:
support@yobolaa.com