Letsfit T20 Bluetooth Wireless Sports Earbuds User Manual
Package Contents
- Wireless earbuds × 1 pair (L / R)
- Charging Case × 1
- Ear tips × 3 pairs (S / M / L; M size ear tips pre-installed)
- Ear wings × 3 pairs (S / M / L; M size ear wings pre-installed)
- USB-C charging cable × 1
- User manual × 1
At a Glance
Earbuds LED Indicator Guide
Charging Case LED Indicator Guide
Press the function button of the charging case to check the charging case battery level.
Wearing the Earbuds
Insert the earbud into the inner canal of your ears and rotate to fit comfortably. To determine the best fit, you may need to try all sizes of ear tips and ear wings.
Using the Earbuds
Charge the earbuds
- Align the charging contacts on the right earbud with the charging pins on the right side of the case.
- Repeat step 1 and to charge the left earbud.
- Close the charging case lid.
Notes:
- Fully dry off the earbuds before charging.
- The earbuds will not be off and charge if you don’t close the charging case lid. Therefore, please close the lid when putting earbuds back for charging.
- When the earbuds have a battery percentage of less than 10%, the earbuds will give a voice prompt every 20 seconds.
Charge the charging case
- Plug the small end of the USB-C cable into the USB-C port of the charging case.
- Plug the other end into a USB wall charger or computer (DC 5V) that is powered on.
Notes:
- It takes approximately 1.5 hours to fully recharge the earbuds.
- Fully charge both the earbuds and the charging case before the first-time using.
- The earbuds and the charging case charge simultaneously. The charging case can be used as a standalone charger.
Power on & off
Power on: Open the charging case.
Power off: Put the earbuds back into the charging case and close the case lid.
Pair
- Make sure the earbuds and your Bluetooth device are next to each other or within 3 feet and there are no obstacles between.
- Open the charging case and the earbuds enter pairing mode.
- Turn on the Bluetooth of your Bluetooth device.
- In the list of found Bluetooth devices in your Bluetooth device, choose “T20” to pair.
Connect to other devices
- Put the earbuds back into the charging case.
- Press and hold the function button of the charging case for 3 seconds and the earbuds enter pairing mode.
- Choose “T20” in your device to pair.
Notes:
- The two earbuds will automatically connect with each other when you open the charging case. But if the TWS connection fails, put the earbuds back into the charging case and press the function button of the case 3 times (the charging case indicator flashes white and orange alternately for 5 seconds and goes off).
- The earbuds will directly enter pairing mode the first time you open the charging case.
- Each time when earbuds are on, they will automatically connect to your last successfully connected device if available within the Bluetooth range.
- When the earbuds are on but not paired with a Bluetooth device, they will be automatically off in 10 minutes.
- Mono mode: When Bluetooth connected, you can use either one of the earbuds only by putting the other one back into the charging case and closing the lid.
Earbuds functions
Call functions
Reset the earbuds
- Put the earbuds back into the charging case.
- Press and hold the function button of the charging case for 10 seconds until the charging case indicator flashes green 5 times.
Cleaning the Earbuds and Charging Case
The earbuds and charging case may require periodic cleaning.
Trouble Shooting
Q: Pairing fails.
A:
- Put the earbuds back into the charging case and close the lid.
- Open the case, the earbuds are automatically on and enter pairing mode.
- Choose “T20” in your Bluetooth device to pair. If the pairing still fails, check the following points:
- Make sure the earbuds and your Bluetooth device are next to each other or within 3 feet and there are no obstacles between.
- There are no signal interference nearby (check the “Connection is not stable” part for signal interference conditions).
- Try to reboot your Bluetooth device.
Q: I paired the earbuds with my phone before, but I failed to pair them with my phone again.
A: Turn on the Bluetooth of your phone and in “MY DEVICES”, choose “T20″ and tap ” ” → “Forget This Device”. Then pair the earbuds with your phone again.
Q: Connection is not stable.
A: Bluetooth signal is transmitted wirelessly and signals can be affected, which results in intermittent sound of earbuds, in the following conditions:
- The distance between the earbuds and your Bluetooth device is at the edge of the Bluetooth pairable distance.
- Transmitted signals encounter obstacles or human body blockage.
- There are high-power electronic devices nearby.
- There are other Bluetooth devices and are being turned on/off nearby. To resume stable connection between the earbuds and your Bluetooth device, try to avoid the above conditions and do the pairing again following the steps in the pairing fails part.
Q: Power runs out fast.
A: The earbuds playtime varies according to volume level and audio content. The following conditions may cause fast power consumption:
- When you put the earbuds back into the charging case, the earbuds will not turn off and charge if you do not close the case lid. To avoid unwanted power consumption, close the lid every time you put them back into the charging case for charging.
- When the earbuds are being charged in the charging case and the case is out of power, the earbuds will turn on automatically. To avoid unwanted power consumption, turn off the earbuds manually.
Specifications
SAFETY AND WARRANTY
Important safety instructions
- Use of earbuds will impair your ability to hear other sounds. Use caution while using your earbuds when you are engaging in any activity that requires your full attention.
- If you have a pacemaker or other electrical medical devices, you should consult your physician before using this product.
- This package contains small parts that may be hazardous to children and should be kept out of reach from children. This product is not a toy – never allow children to play with this product. Always store the product out of reach from children. The bags themselves or the many small parts they contain may cause choking if ingested.
- Never try to dismantle the product yourself, or push objects of any kind into the products, as this may cause short circuits which could result in a fire or electric shock.
- None of the components can be replaced or repaired by users. Only authorized dealers or service centers may open the product. If any parts of your product require replacement for any reason, including normal wear and tear or breakage, please contact us.
- Avoid exposing your product to rain, moisture or other liquids to protect against damage to the product or injury to you.
- Keep all products, cords, and cables away from operating machinery.
- If the product overheats, if the product has been dropped or damaged, if the product has a damaged cord or plug, or if the product has been dropped in a liquid, discontinue use and contact us.
- Do NOT use in areas where there are explosive hazards.
- Do NOT submerge the earbuds in water. Do NOT expose the earbuds to moving water (e.g., from a faucet, etc.).
- Do NOT wear the earbuds while showering or bathing, or when participating in water sports, e.g., swimming, water skiing, surfing, etc.
- This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.
- Leaving the product in hot or cold places, such as in a closed car in the summer and winter conditions, will reduce the capacity and lifetime of the earbuds.
- Dispose of the product according to local standards and regulations. Remember: Always drive safely, avoid distractions and follow local laws!
- Using the earbuds while operating a motor vehicle, motorcycle, watercraft or bicycle may be dangerous, and is illegal in some jurisdictions, just as use of the earbuds with both ears covered while driving is not permitted in certain jurisdictions. Check your local laws.
- Using the earbuds while operating a motor vehicle, motorcycle, watercraft or bicycle may be dangerous, and is illegal in some jurisdictions, just as use of the earbuds with both ears covered while driving is not permitted in certain jurisdictions. Check your local laws. Use caution while using your earbuds when you are engaging in any activity that requires your full attention. While engaging in any such activity, removing the earbuds from your ear or turning off your earbuds will keep you from being distracted, so as to avoid accident or injury. Do not take notes or read documents while driving.
- When using and charging this product, basic precautions should always be followed, including the following:
- Read all the instructions before using the charging case.
- To reduce the risk of injury, close supervision is necessary when the charging case is used near children.
- Do not expose charging case to water, rain, liquids or snow.
- Use of a power supply or charger that is not recommended or sold by power pack manufacturer may result in a risk of fire or injury.
- Do not use the charging case in excess of its output range.
- Do not use a charging case that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
- Do not disassemble the charging case. Incorrect reassembly may result in risk of fire or injury.
- Do not open, crush or expose a charging case to fire or excessive temperature. Exposure to fire or extreme temperature may cause explosion.
- Have servicing performed by a qualified repair person using only identical replacement parts.
WARRANTY
We strive to build our products with the highest attention to detail and craftsmanship. However, sometimes there are occurrences of defect. We are happy to offer a one-year hassle-free warranty to all our products as we continue to make amazing products. Please contact us if you have any questions about our devices.
REFRENCE LINK