Golrex T59 Bluetooth Headphones Wireless Earbuds User Guide

Golrex T59 Bluetooth Headphones Wireless Earbuds User Guide

Package Accessories

Overview

Product Parameters

1.  BT Version: BTS.0
2. Supports: HSP/HFP/A2DP/AVRCP
3.  Charging Interface: Point-Contact
4.  Charging Port: Type-C
5.  Battery Capacity: (Li-ion battery inside) Earbud: 50mAh Charging case: 650mAh
6.  Battery Life: Twin Earbuds will last 8hrs on single fully charge(Actual battery life changes with the song types and volume requirements)
7.  Standby Time: Up to 100hrs
8.  Charging Time: 1-1.Shrs for earbuds/2hrs for charging case
9.  Transmission Range: 33 feet (with no obstacle)

First Use

1.  After you open the package for the first time use, please tears off the insulation film on the earbuds, then charge the both earbuds and charging case via supplied Type-C Charging Cable for at least 10 mins (or not in use for long time); do not take out the earbuds during this period.
2.  The earbuds are installed with a pair of medium-sized ear tips by defaulty. Please select the suitable size for secure fit.

How To Wear

Step 1:
Adjust sound holes downwards and push earbuds into your ears.

Step 2:
Slightly move earbuds to fit you best.

How to Pair?

Method 1:

1. Pick up two earbuds from charging case, and they will auto power on and pair with each other in 10s.
2. The white indicator light of dual earbuds flash to enter pairing mode.
3.  On phone, search for “T59” and tap to connect.

• • There is voice prompt “connected” from both earbuds if you wear them. And the indicators of both earbuds will turn off.

Method 2:
In the unconnected state, double click the MFB of two earbuds to enter pairing mode.

How to Reset

1. Delete the pairing name “T59” on your mobile phone and turn off the BT function.
2.  Turn off the earbuds then press and hold the MFB for 8s in power-off/unconnected state, release the MFB after the red and white LED indicators rapidly flash three times at the same time.
3.  Put the earbuds back into the charging case and close the charging case.
4.  Take out the earbuds from the charging case and they enter pairing mode. That means the earbuds have been reset successfully.
5.  If the reset fails, please repeat the above steps.

Indicator status of the earphone

• Power-on: White light for ls;
• Power-off: Red light for ls;
• Pairing mode of the earphones: White light of dual earbuds flash;
• Connected to the standby state: White light on the L/R earphone for ls after connected, then goes out;
• Phone state: White light goes out.

How to Charge?

Type-C USB Charging
There is a Type-C USB charging cable in the package, please use it to charge the case directly. During Charging, the digital display will flashing and display battery in real time. Troubleshooting

 What should I do when the earbuds can’t be paired with my mobile device?
Reset your earbuds and pair the earbuds with your mobile device again.

What to do when the earbuds can’t be charged?
The Charging Case may run out of power. Please charge it for at least one hour, then put the earbuds into it to charge.There may be some malfunction with your Charging Case. If your Charging Case can’t charge for earbuds after many attempts, please contact us.

 What should I do if there is no sound from one earbuds?
 Turn off Bluetooth on the device and turn it on, then pair your earbuds with the mobile device again.

REFERENCE LINK

https://www.golrex.net/