Table of contents
show
GAMDIAS Talos E1 RGB Mini-Tower PC Case User Manual
EXPLODED VIEW PARTS
0. Chassis Body
1. Swing Door
2. Tempered Glass Left Side Panel
3. Right Side Panel
4. Top Dust Filters
5. Tempered Glass Front Panel
6. Front Panel
7. Logo Panel
8. IO Port
9. HDD Tray
10.Rubber Foot
ACCESSORY
SIDE PANEL REMOVAL
- Remove the side panel.
MOTHERBOARD INSTALLATION
- Lay down the chassis Install the motherboard in proper location and secure it with screws
PSU INSTALLATION
- Place the PSU in proper location
3.5″ 2.5″ HDD INSTALLATION
- A. 3.5″ HDD:
Align the HDD into the mounting holes and screw in. - B. 2.5″ SSD:
Align the SSD into the mounting holes and screw in.
PCI-E/PCICARD (s)USAGE
- (Optional) Extend in stalling to Motherboard.
- PCI-E Cable Not Included.
AIR COOLING COMPATIBILITY
- Top: 120 mm x 2 or 140 mm x 2
- Front: 120 mm x 2 or 140 mm x 2
- Rear: 120 mm x 1
I/O PORTS
- Power Button
- Fan LED Control
- USB 2.0
- Headphone
- MIC
- USB 3.0
- Long press on LED button for 3 seconds , fans will red lighted which now are controlled by MB software. And vice versa.
I/O CONNECTORS
See your motherboard’s manual for front panel header locations and pi-outs.
SPECIFICATIONS
- Dimension (L x W x H): 365 x 190 x 365 mm or 14.4 x 7.5 x 14.4 inch
- Case Type: MID Tower
- Material: Tempered Glass, SPCC, ABS
- Side Panel: 4mm Tempered Glass x 2 (Left & Front)
- Motherboard Support: 6.7″ x 6.7″ (Mini ITX), 9.6″ x 9.6″ (Micro ATX)
- LOGO Light: Yellow LED
- IO Port: USB 3.0 x 2, USB2.0 x 2, Mic, Headphone, Fan LED Control
- Expansion Slots: 4
- Drive Bays: 1 x 3.5″ or 1 x 2.5″(HDD Cage) 2 x 2.5″
- PSU: ATX PS2
