Table of contents
show
GAMDIAS TALOS-M1A Computer Case User Manual
SPECIFICATIONS
- Dimensions (H× W xD) 448 × 210 x 466 mm 17.6 × 8.3 x 18.3 inch
- Case Tyne MID Tower
- Material(s) Tempered Glass, SPCC, ABS
- Side Panel 4mm Tempered Glass x 2 (Left & Front)
- Motherboard Support 6.7″ x 6.7″ (Mini IT X), 9.6″ x 9.6″ (Micro ATX), 12″ × 9.6″ (ATX)
- Expansion Slots 7+2
- Drive Bays
- 2 × 3.5″ or 2 × 2.5″(HDD Cage) 2 x 2.5″
- Radiator Support
- Front: 1 x 360mm, 1 x 280mm
Rear: 1 x 120mm - Fan Support
- Front: 3 x 120mm, 2 x 140mm
Top: 2 x 120mm, 2 x 140mm
Rear: 1 x 120mm, 1 x 140mm - PSU ATX PS2
- Clearance
- CPU cooler height limitation: 168mm
VGA length limitation: 350mm
PSU length limitation: 180mm
EXPLODED VIEW PARTS
PARTS
- Chassis Body
- Screw
- Tempered Glass Side Panel
- Right Side Panel
- Tempered Glass Front Panel
- Front Panel
- RGB Light
- IO Port
- HDD Tray
- Top Dust Filters
ACCESSORY
SIDEPANEL REMOVAL
Remove the side panel
MOTHERBOARD INSTALLATION
Lay down the chassis Install the motherboard in the proper location and secure it with screws
PSU INSTALLATION
3.5″ 2.5″ HDD INSTALLATION
- A. 3.5″ HDD
Align the HDD into the mounting holes and screw it in. - B. 2.5″ SSD Align the SSD into the mounting holes and screw it in.
PCI-E/PCICARD (s)USAGE
(Optional) Extend in stalling to Motherboard. PCI-E Cable Not Included.
AIR COOLINGCOMPATIBILITY
- Top 120 mm x 2 or 140 mm x2
- Front 120 mm x 3 or 140 mm x2
- Rear 120 mm x 1 or 140 mm
RADIATOR COMPATIBILITY
- Top 240 mm
- Front 360 mm or 280 mm
- Rear 120 mm
I/O PORTS
- Power Button
- LED Controller
- USB 3.0
- USB 2.0
- USB 2.0
- Headphone
- Mic
- IO LED Control
Switchable IO and Logo Plate.
I/O CONNECTORS
See your motherboard’s manual for front panel header locations and pi-outs.
RGB FAN CONTROLLER INSTALLATION
- The fan-led wiring must be connected to the fan hub in the order you want the lighting effects to be displayed.
- Fans must start at “1” and continue in series. 1 > 2 > 3 > 4 > 5 > 6
- Any fan not connected in series will break communication and the RGB lighting function will not work.
- Mount the fan(s) to the location of your choice in the chassis.
- Mind a location for the fan hub that allows connection for all of the fan’s RGB LED cables installed in your system.
- The fan controller will also need to be plugged into the fan hub for control of the RGB LED lighting.
- Mount the fan hub with the provided mounting strips.