Taotronics-TT-HE018-Tower-Heater-User-Manual-Feature-Image

Taotronics TT-HE018 Tower Heater User Manual

Views: 28
Table of contents show

Taotronics-logo

Taotronics-TT-HE018-Tower-Heater-User-Manual-Image

Taotronics TT-HE018 Tower Heater User Manual

KNOWING YOUR TOWER HEATER Body

Taotronics-TT-HE018-Tower-Heater-User-Manual-Image-1

Control Panel

Taotronics-TT-HE018-Tower-Heater-User-Manual-Image-2

USING YOUR TOWER HEATER

  1. Place the heater on a level and flat surface.
  2. Plug the heater into an electrical outlet.
  3. Press the ON/OFF switch at the back to “to enter standby mode.
  4. Tap on the heater/remote control to start working, tap again to stop.

Note

  • If the PTC is working, the heater will work for another 30s after stop working, then enters standby mode.
  • No operation within 1 min, the screen will be auto-off. Tap any button to wake up the screen.

Heating Levels

  • Natural: The air output is in current ambient temperature.
  • Warm: The air output is warm air
  • Hot: The air output is hot air.

Temp Settings

  • When the ambient temperature reaches the desired temperature, the PTC stops working; When the ambient temperature falls below the desired temperature, the PTC resume working automatically.

Remote Control

Taotronics-TT-HE018-Tower-Heater-User-Manual-Image-3

  • Basically the buttons are the same as the control panel.
  • The button is to Mute Unmute the key tone

CLEANING AND STORAGE

Always unplug the heater and wait until the heater cools down before cleaning and storing it!

  • Do not cleanse the heater body with water.
  • Wipe down the body with some neutral detergent with a soft cloth and wipe dry.
  • Do not use any solvent such as gasoline.
  • After each cleaning, wait until the heater gets dry before using or storing.
  • Place the heater back in the packing box to protect it from dust. Store it in a cool, dry location.

Specifications

  • Power:
    • Hot Air (2000 Watts)
    • Warm Air (1400 Watts)
  • Voltage: 220-240V
  • Current: 50Hz

TROUBLESHOOTING

The heater fails to power on.

  • Make sure the heater is securely plugged into the outlet.
  • Place the heater on a level and flat surface.
  • Press the heating level button to cancel temp settings; Set the temp above the ambient temp.
The heater cannot be turned off.
  • Press the Power ON/Standby button to stop the heater from working.

FAQS

How many watts does a tower heater use?
  • Generally, a space heater will use between 1,500 and 1,800 watts. 
How many watts do I need for my room?
  • For optimal ambient lighting, it’s typically recommended to use about 1.86 watts per square foot.
Where is the best place to put an oil heater?
  • To effectively heat a room, it is important to place the heater in a central location, away from any obstructions such as furniture or curtains.
Can you leave a tower heater on all night?
  • Leaving the heater running all night might cause a fire because of an overloaded circuit, or a nearby item could ignite.
How much electricity does a tower heater use?
  • Key takeaways. On average, space heaters use 1,500 watts of electricity.
Are tower heaters effective?
  • If you’re trying to heat a room with multiple people in it, a tower heater is the way to go.
How to calculate heater size for a room?
  • In more moderate climates, multiply by 20 – 30. And in cold climates multiply the square foot number by 30 – 40.
How does a tower heater work?
  • Ceramic heaters work by passing an electric current through a ceramic plate or element that heat up quickly.
Why won’t my plug-in heater stay on?
  • First, ensure that the heater is properly plugged in and there is power to the outlet.
Why does my heater keep tripping the power?
  • If your electric space heater keeps tripping your circuit breaker, it’s crucial to take immediate action. First, unplug the heater and reset the breaker.

DOWNLOAD PDF

2d7375d86529764ea91857694c2937a5fbb0e17895e64d0371ded85f59eac2a0_optim

Tags: , , , , , ,