Targus APK11US Wireless Numeric Keypad User Manual
Introduction
Thank you for your purchase of the Targus Wireless Numeric Keypad. This keypad is designed with a storable USB receiver, providing ease of use when travelling.
Contents
- Targus Wireless Numeric Keypad
- 1 x AAA Battery
- 1 x USB Receiver
- User Guide
System Requirements
Hardware
- USB port
Operating System
- Microsoft Windows® 2000
- Microsoft Windows® XP
- Microsoft Windows Vista®
- Microsoft Windows® 7
- Mac OS® X 10.4 or later
Installing the Batteries
- Remove the battery cover from the back of the keypad.
- Insert the supplied battery, making sure that the positive (+) and negative (-) ends of each battery match the polarity indicators inside the battery compartment.
- Slide the battery cover back into position until it “clicks” firmly into place.
Connecting to Your Computer
- Remove the USB receiver from the back of the keypad.
- Plug the USB receiver into an available USB port on your computer.
- Power on the keypad by using the On/Off switch located on the back of the keypad.
This keypad is a plug-and-play device. It should automatically operate when the USB receiver is connected to the computer.
Re-Establishing a New Connection
If the response time of the keypad is slow or it intermittently stops working:
- Unplug the USB receiver from the computer.
- Plug the USB receiver into another available USB port and the LED indicator will flash for 1 minute to indicate pairing mode is activated.
- Power on the keypad and press the reset button to re-establish a new connection.
Battery Life Indicator
The light will turn on when the power is low and the batteries need to be replaced.
Power Management
- To extend the life of your battery, turn off the keypad while traveling or when you’re not using it.
Technical Support
For technical questions, please visit:
US Internet:
Australia Internet:
- www.targus.com/au
- Email: infoaust@targus.com
- Telephone: 1800-641-645
New Zealand Telephone:
- 0800-633-222
Product Registration
Targus recommends that you register your Targus accessory shortly after purchasing it. Go to: http://www.targus.com/registration.asp You will need to provide your full name, email address, country of residence and product information.
Warranty
Targus warrants this product to be free from defects in materials and workmanship for one year. If your Targus accessory is found to be defective within that time, we will promptly repair or replace it. This warranty does not cover accidental damage, wear and tear, or consequential or incidental loss. Under no conditions is Targus liable for loss of, or damage to devices; nor loss of, or damage to, programs, records, or data; nor any consequential or incidental damages, even if Targus has been informed of their possibility. This warranty does not affect your statutory rights.
1 YEAR LIMITED WARRANTY:
We pride ourselves on the quality of our products. For complete warranty details and a list of our worldwide offices, please visit www. targus.com. Features and specifications are subject to change without notice. Microsoft, Windows, and Windows Vista are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Mac is a trademark of Apple Inc., registered in the U.S. and other countries. Logitech is a registered trademark of Logitech International in the United States and other countries. All trademarks and registered trademarks are the property of their respective owners. ©2010 Targus Group International, Inc
Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
FCC Statement
Tested to Comply
This equipment has been tested and found to comply with the limits of a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used by the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna;
- Increase the separation between the equipment and receiver;
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected;
- Consult the dealer or an experienced radio/TV technician for help
