Philips-TAS3505-Wireless-Bluetooth-Speaker-User-Manual-Feature-Image

Philips TAS3505 Wireless Bluetooth Speaker User Manual

Philips-TAS3505-Wireless-Bluetooth-Speaker-User-Manual-Image

Philips TAS3505 Wireless Bluetooth Speaker User Manual

Philips-TAS3505-Wireless-Bluetooth-Speaker-User-Manual-Image-1

Important safety instructions

  •  Make sure that the power supply voltage corresponds to the voltage on the back or the underside of the unit.
  •  Make sure that there is enough free space around the speaker for ventilation.
  •  Please use the speaker safely in an environment with temperature between
  •  Only use attachments and accessories specified by the manufacturer.

Battery safety precautions

  •  Replace only with the same or equivalent type.
  •  Do not replace a battery with an incorrect type that can defeat a safeguard
  • Disposing a battery into fire or a hot oven, mechanically crushing or cutting a battery can result in an explosion.
  •  Leaving a battery in an extremely high temperature surrounding, or an extremely low air pressure environment may result in an explosion or leakage of flammable liquid

Your wireless speaker

What’s in the box

Check and identify the contents of your package:

  • Speaker
  • USB cable
  • Quick start guide
  •  Safety sheet
  •  Worldwide warranty
Overview of the speaker

Philips-TAS3505-Wireless-Bluetooth-Speaker-User-Manual-Image-2
Philips-TAS3505-Wireless-Bluetooth-Speaker-User-Manual-Image-3

 

  • Turn the speaker on or off
    Philips-TAS3505-Wireless-Bluetooth-Speaker-User-Manual-Image-5
  • Enter Bluetooth pairing mode.
  • Clear Bluetooth pairing information.
  • Philips-TAS3505-Wireless-Bluetooth-Speaker-User-Manual-Image-6In Bluetooth mode, press to pause or resume play.
  •  Respond to an incoming call through Bluetooth connection.
  • Philips-TAS3505-Wireless-Bluetooth-Speaker-User-Manual-Image-7 Increase volume.
  • Philips-TAS3505-Wireless-Bluetooth-Speaker-User-Manual-Image-8Decrease volume.
  • LED indicator

DC IN

  • Charge the built-in battery.

Get started

Charge the built-in battery

The speaker is powered by a built-in rechargeable battery Connect the USB-C socket on the speaker to an outlet (5V 1A) by using the provided USB cable.

Philips-TAS3505-Wireless-Bluetooth-Speaker-User-Manual-Image-9

  • Power on LED blinks red slowly.
  • When the speaker is fully charged, LED is solid White.
  • When the speaker is being charged, Power o
  • LED blinks red slowly.
  • When the speaker is fully charged, LED o.

Play from Bluetooth devices

With this speaker, you can enjoy audio from your Bluetooth device.

Note

  1.  The maximum distance for pairing the speaker and your Bluetooth device is 20 meters (66 feet).
  2.  Keep away from any other electronic device that may cause interference.
  3.  Press to turn the speaker on. It will enter Bluetooth pairing mode automatically.
  4. Enable Bluetooth and select “Philips S3505” in the Bluetooth list on your device for pairing. If a message prompts for permission for Bluetooth connection, confirm it.
  5. Play audio on your Bluetooth device to start streaming music.

LED indicator                                 Description
Blinking white quickly                  Ready for pairing
Solid white                                    Connected

Troubleshooting

To keep the warranty valid, never try to repair the speaker yourself.If you encounter problems when using this
speaker, check the following points before requesting service. If the problem remains unsolved, go to the Philips website (www.philips.com/welcome). When you contact Philips, ensure that the speaker is nearby and the model
number and serial number are available.

General

No power

  •  Make sure the speaker is fully charged.
  •  Make sure the USB socket of the speaker is properly connected.
  • As a power-saving feature, the speaker audio signal is received .

No sound

  •  Adjust the volume on this speaker.
  •  Adjust the volume on the connected device.
  • Make sure that your Bluetooth device is within the operational range.
Bluetooth

The audio quality is poor after connection with a Bluetooth-enabled device

  • The Bluetooth reception is poor. Move the device closer to this speaker or remove any obstacle between them.

Fail to find [Philips S3505] on your Bluetooth device for pairing

  •  Press and hold for 2 seconds to enter Bluetooth pairing mode, and then try again.

Cannot connect with your Bluetooth device

  •  Refer to the user manual of your device to find out how to enable the function.
  • This speaker is not in pairing mode.
  •   Disconnect and try again

 Notice

MMD Hong Kong Holding Limited may void the user’s authority to operate the equipment.

FCC Statement
  1. This device may not cause harmful interference
  2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications no guarantee that interference will not occur in a particular installation.

DOWNLOAD PDF

Philips TAS3505 Wireless Bluetooth Speaker User Manual

REFERENCE LINK

https://www.philips.com/support

Leave a Reply