OutDoor Tech Chips Ultra 2.0 True Wireless Helmet Audio User Manual
WHAT’S INSIDE
- Left and right helmet audio
- Charging case
- USB-C charging cable
- Instruction manual
- One ODT sticker
ANATOMY
A. Left ear button
B. Right ear button
C. LED light
D. Microphone
E. Hi-Fi Speakers
FUNCTIONS
| Power On | LEFT | Long press for 3 sec |
| Power On | RIGHT | Long press for 3 sec |
| Power Off | LEFT | Press and hold for 4 sec |
| Power Off | RIGHT | Press and hold for 4 sec |
| Answer | RIGHT | Short press once |
| Reject | RIGHT | Long press for 2 sec |
| Hang Up | RIGHT | Short press once |
| Play | RIGHT | Short press once |
| Pause | RIGHT | Short press once |
| Skip Forward | RIGHT | Short press twice |
| Skip Backward | RIGHT | Short press three times |
| Raise Volume | LEFT | Short press once |
| Lower Volume | LEFT | Short press twice |
| Siri/Voice Activation | RIGHT | Long press 1 sec |
| Reset Chips Ultra/ Clear BT Memory | Refer to the paper insert in the box for instructions |
CHARGING-THE CASE
Charge up the case so you always have power for your Chips ® Ultra 2.0 on the go. Fast charging with the new USB-C cable. Once the charging case is plugged in the indicator light on the front will turn RED- (CHARGING). It will turn GREEN once the case is completely charged. Case total charging time: 1.5 hours to fully charge the case.
CHARGING-THE CHIPS 5
Charge your Chips ® Ultra 2.0 on the way to the hill, instead of having to plug them in the night before. Gently plug the three holes on the side of the Chips ® Ultra 2.0 into the three prongs in the charging case. Be sure to put the Left Chip in the Left side and the Right Chip in the Right side in the charging case. The LED lights on both Chips will be RED – (CHARGING). Once both LEDs go off the Chips are fully charged. Chips ® Ultra 2.0 total charging time: About 2 hours
PAIRING
- VOICE PROMPT: “power on >> battery level >> pairing”
- Choose: “ODT Chips Ultra 2.0” in your phone’s Bluetooth settings.
- VOICE PROMPT: “device connected”
- POWER ON THE LEFT (long press 3 seconds)
- VOICE PROMPT: “power on >> connected”
MUSIC FUNCTIONS
| FUNCTION | ACTION |
| POWER ON | long press 3 seconds |
| POWER OFF | Press and hold 4 seconds |
| PLAY | short press 1x |
| PAUSE | short press 1x |
| SKIP FORWARD | short press 2x |
| SKIP BACKWARD | short press 3x |
PHONE FUNCTIONS
| FUNCTION | ACTION |
| ANSWER CALL | short press 1x |
| END CALL | short press 1x |
| REJECT CALL | long press 2 seconds |
| SIRI / VOICE ACTIVATION | long press 1x |
VOLUME CONTROLS
| FUNCTION | ACTION |
| POWER ON | long press 3 seconds |
| POWER OFF | Press and hold 4 seconds |
| VOLUME UP | short press 1x |
| VOLUME DOWN | short press 2x |
PUT THE CHIPS ULTRA 2.0 IN YOUR HELMET
Drop the CHIPS® Ultra 2.0 into the slots inside your helmet liner.
Rock out, make calls, and, you know, ski and snowboard and whatnot.
Drop the CHIPS® Ultra 2.0 into the slots inside your helmet liner.
Rock out, make calls, and, you know, ski and snowboard and whatnot.SPECS
- Bluetooth version: Bluetooth 5.0+ EDR
- Bluetooth profiles: A2DP, AVRCP, HSP, HFP
- Driver units: 40mm Neodymium magnet
- Frequency Response: 20~20,000 Hz
- Impedance: 32 + 32 ohms
- Sensitivity (1kHz): 110 dB
- Range: Up to 10m/33ft
- Microphone: Built-in microphone
- Battery: 3.7V, 250 mAh
- Chips Charging time: About 2 hours
- Play / Talk time: Up to 14 hours
CHARGING CASE
- Charging time: 1.5 hours (DC 5V 2A)
- Battery: 3.7V 2000 mAh
CARE & MAINTENANCE
- Keep the Chips® Ultra 2.0 away from direct sunlight or hot places. High temperatures will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
- Do not try to disassemble the CHIPS® Ultra 2.0.
- Do not let the Chips® Ultra 2.0 fall onto the floor or other hard surfaces. The internal circuit board may get damaged.
- Do not use intensive chemical products or detergent to clean the product.
- Do not scratch the surface with sharp things.
