TIKSOUND Wireless Earbuds User Manual
Wireless Earbuds
Thank you for purchasing our products. This manual addresses the safety guidelines, warranty and operating instructions. Please review this manual thoroughly before operating your device.
SAFETY
Important Safety Instructions
- Use of earbuds will impair your ability to hear other sounds. Use caution while using your earbuds when you are engaging in any activity that requires your full attention.
- If you have a pacemaker or other electrical medical devices, you should consult your physician before using this product.
- This package contains small parts that may be hazardous to children and should be kept out of reach from children. This product is not a toy
- never allow children to play with this product. Always store the product out of reach from children. The bags themselves or the many small parts they contain may cause choking if ingested.
- Never try to dismantle the product yourself, or push objects of any kind into the products, as this may cause short circuits which could result in a fire or electric shock.
- None of the components can be replaced or repaired by users. Only authorized dealers or service centers may open the product. If any parts of your product require replacement for any reason, including normal wear and tear or breakage, please contact us.
- Avoid exposing your product to rain, moisture or other liquids to protect against damage to the product or injury to you.
- Keep all products, cords, and cables away from operating machinery.
- If the product overheats, if the product has been dropped or damaged, if the product has a damaged cord or plug, or if the product has been dropped in a liquid, discontinue use and contact us.
- Do NOT use in areas where there are explosive hazards.
- Do NOT submerge the earbuds in water. Do NOT expose the earbuds to moving water (e.g., from a faucet, etc.).
- Do NOT wear the earbuds while showering or bathing, or when participating in water sports, e.g., swimming, waterskiing, surfing, etc.
Remember:
- Always drive safely, avoid distractions and follow local laws!
Using the earbuds while operating a motor vehicle, motorcycle, watercraft or bicycle may be dangerous, and is illegal in some jurisdictions, just as use of the earbuds with both ears covered while driving is not permitted in certain jurisdictions. - Check your local laws. Use caution while using your earbuds when you are engaging in any activity that requires your full attention. While engaging in any such activity, removing the earbuds from your ear or turning off your earbuds will keep you from being distracted, so as to avoid accident or injury. Do not take notes or read documents while driving.
- Here other U and I earbuds
WARRANTY
We strives to build our products with the highest attention to detail and craftsmanship. However, sometimes there are occurrences of defect. We are happy to offer 1-year hassle-free warranty to all our products as we continue to make amazing wireless product. Please contact us if you have any questions about our devices.
Package Contents
- Wireless earbud earbuds × 1 pair (left and
- Charging case × 1
- Ear tips × 3 pairs (large, medium, small)
- Micro USB cable × 1
- User manual × 1
At a Glance
- Microphone
- MFB button (multi-function button) LED indicator
- Charging case
- LED indicator
- Micro USB charging port
- L (for the left ear, master earbud)
- R (for the right ear) Replaceable ear tips
EAR BUDS
CHARGING CASE
Earbud LED Indicator Guide
- Power on: LED indicators stay blue for a second
- Power off: LED indicators stay white for a second
- Pairing mode (using both earbuds): LED indicator on the left earbud flashes blue and white alternately
- Pairing mode (using only one earbud): LED indicator on the earbud flashes blue and white alternately
- Connected to a Bluetooth device: LED indicators flash blue every 7 seconds
- Low battery: LED indicators flash white every 5 seconds and a voice reminder prompts every 2 minutes
- Earbuds are being charged: LED indicators stay white
- Earbuds are fully charged: LED indicators are off
Charging Case LED Indicator Guide
Earbuds are taken out of or put back into the charging case:
- 1-25% battery: LED indicator flashes blue once
- 25%-50% battery: LED indicator flashes blue twice
- 50%-75% battery: LED indicator flashes blue 3 times
- 75%-100% battery: LED indicator flashes blue 4 times
- Note: Charging case LED indicator is off when earbuds are being charged in the charging case.
Charging case is being charged:
- 1-25% battery: LED indicator flashes blue once every 2 seconds
- 25%-50% battery: LED indicator flashes blue twice every 2 seconds
- 50%-75% battery: LED indicator flashes blue 3 times every 2 seconds
- 75%-100% battery: LED indicator flashes blue 4 times every 2 seconds
- Charging case is fully charged: LED indicator stays blue
Wearing the Earbuds
Insert the earbud into your ear and rotate to fit comfortably. Ensure the microphone is pointing towards your mouth.
Using the Earbuds
- Charge the earbuds
When you use the earbuds for the first time, remove the insulating film s on the charging contacts of the earbuds.- Align the charging contacts on the right earbud with the charging pins on the right side of the case.
- Repeat steps 1 and to charge the left earbud
- Close the case when the earbuds LED indicators are solid white
- Align the charging contacts on the right earbud with the charging pins on the right side of the case.
- Charge the charging case
- Plug the small end of the USB cable into the Micro USB port of the charging case.
- Plug the other end into a USB wall charger or computer (DC 5V) that is powered on.
Specifications
- Model: D39
- Bluetooth Standard: V5.0
- Operating Range: 33 feet/10 meters (No obstacles between)
- Supporting Protocols: A2DP/HFP/HSP/AVRCP
- Charging Time: 2 hours (earbuds); 2 hours (charging case)
- Talk/Playing Time: about 3 hours (Varies according to volume level and audio content)
- Charging Voltage: DC 5V
- Battery Type: Li-polymer
- Battery Capacity: 50mAH (earbuds); 480mAH (charging case)
Power on/off
on
- The earbuds are automatically on when you take them out of the charging case.
- Press and ho ld the MFB button s for 2 seconds to turn on
- Note: When you use the earbuds for the first time, remove the insulating film s on the charging contacts of the earbuds, and power on the earbuds by pressing and holding the MFB buttons on both earbuds for 2 seconds.
off
- The earbuds are off automatically when you put them back into the charging case.
- Press and hold the MFB button s for 4 seconds to turn them off (when both earbuds are paired with your phone, press and hold the MF B button on either left or right earbud, the other earbud will be off at the same time)
Pair
Before pairing the earbuds with your phone or other Bluetooth devices, make sure that the Bluetooth version of your phone or other Bluetooth devices are 4.0 or higher.
Pair both earbuds (Pair use)
- Make sure the earbuds and your phone or other Bluetooth devices are next to each other (within 3 feet, no obstacles between).
- Turn on the Bluetooth of your phone or other Bluetooth devices.
- Turn on the earbuds (when they are in shutdown state) and the earbuds enter pairing mode (LED indicator on the left earbud flashes blue and white alternately).
- In the list of found Bluetooth devices in your phone or other Bluetooth devices, choose “D39-L” to pair.
- Enter “0000” if your phone or Bluetooth device asks you to enter a code to pair.
Trouble Shooting
- Q: Pairing failed.
- Put the earbuds back to the charging case and make sure that they are off.
- Take the earbuds out of the case and they are automatically on.
- Wait that the indicator on the left earbud flashes blue and white alternately and earbuds enter pairing mode.
- Choose “D39-L” in your phone to pair.
- Q: Earbuds are connected to phone A, but I want to pair earbuds with phone B when I am not able to disconnect earbuds from phone A.
- Turn off the earbuds by pressing and holding the MFB buttons for 4 seconds.
- Press and hold the MFB buttons until the indicator on the left earbud flashes blue and white alternately and earbuds enter pairing mode.
- Choose “D39-L” in phone B to pair.