Timex Marathon Digital Watch User Manual featured img

Timex Marathon Digital Watch User Manual

timex logo

Timex Marathon Digital Watch User Manual

Timex Marathon Digital Watch User Manual producyt img

About

  • Adjustable Black 15mm Resin Strap, Fits Around 8″ Wrist
  • 24-Hour Stopwatch; Customizable Daily Alarm; 2 Time Zones
  • 24-Hour Military Watch; Selectable Time Chime; Date
  • Black acrylic lens, gray case 43mm; ; Indiglo Luminous Watch Dial
  • Water Resistance to 50 meters (165 feet): Generally suitable for short swims, but not for diving or snorkeling

EXTENDED WARRANTY

Available in the U.S. only. Extend your warranty for an additional 4 years from the date of purchase for $5. You can pay with AMEX, Discover, Visa, or MasterCard by calling 1 800-448-4639 during normal business hours. Payment must be made within 30 days of purchase. Name, address, telephone number, purchase date, and 5-digit model number required. You can also mail a check for $5 to Timex Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203. Please read the instructions carefully to understand how to operate your Timex® watch. Your model may not have all of the features described in this booklet.

FEATURES AND BASIC OPERATION

Timex Marathon Digital Watch User Manual fig 1

  1. Date with MM-DD (month/day) format
  2. Daily Alarm with Snooze feature
  3. Hourly Chime
  4. 24-Hour Stopwatch with Split time
  5. INDIGLO® night-light

Button functions are shown with setting functions in parentheses

TIME

To set a time and date

  1. Press MODE until you get to the screen where the Seconds can be seen flashing.
  2. Press ST/STP/ALM to set Seconds to zero adding one minute if seconds are “30” or greater.
  3. Press RESET/NEXT to set Hours, as indicated by its flashing. Press ST/STP/ALM to advance the Hours setting. Press and hold to increment quickly. Note: As the Hours are incremented, the time indicator changes from “A” (AM), to “P” (PM) to “H” (24-hour time)
  4. Press RESET/NEXT to set Minutes, as indicated by its flashing. Press ST/STP/ALM to advance the Minutes setting. Press and hold to increment quickly.
  5. Press RESET/NEXT to set the Month number, as indicated by its flashing. Press ST/STP/ALM to advance the Month set. Press and hold to increment quickly.
  6. Press RESET/NEXT to set the Day, as indicated by its flashing. Press ST/STP/ALM to advance the Day setting. Press and hold to increment quickly.
  7. Press RESET/NEXT to set the Day of the Week, as indicated by its flashing. Press ST/STP/ALM to advance the Day of the Week set. Press and hold to increment quickly.
  8. Press MODE to exit Time Set.

STOPWATCH

Use this function for timing events.

  1.  Press MODE until “ST” appears.
  2. . Press ST/STP/ALM to start timing.
  3. With the stopwatch running, press RESET/NEXT to record a Split time. The stopwatch will continue timing in the background.
  4. Press RESET/NEXT to release the display and show the current running stopwatch time.
  5. 5. Press RESET/NEXT to record another Split time.
  6. Press ST/STP/ALM to pause the timing.
  7. Either press ST/STP/ALM to resume timing, or press RESET/NEXT to reset the Stopwatch to zero.

ALARM

  1. To turn on/off or to set a Daily alarm with a one-time snooze feature. To turn on/off an hourly chime. 1. Press MODE until “AL” appears.
  2. Press ST/STP/ALM repeatedly to turn on/off the Alarm (ALM ) or the Hourly Chime (CHI, SIG or ) or both.
  3. To Set the Alarm, press RESET/NEXT. The Hour digit flashes and the Alarm ON (ALM or ) lights.
  4. Press ST/STP/ALM to advance the Hours setting. Press and hold to increment quickly. Note: The Hours will be presented in the same format (12- or 24-hour time) as the time setting.
  5. Press RESET/NEXT to set the Minutes as indicated by its flashing. Press ST/STP/ALM to advance the Minutes setting. Press and hold to increment quickly. 6. Press RESET/NEXT to exit the Alarm Setting mode. 7. When the alarm sounds:
  6. Press ST/STP/ALM or RESET/NEXT to stop the alert, and the alarm will sound at the same time on the next day. OR,
  7. Press MODE while the alert is sounding. This will stop the alert and postpone the alarm for 5 minutes.

WATER AND SHOCK RESISTANCE
If your watch is water-resistant, meter marking or (Timex iConnect Pro By Timex fig 11) is indicated

Timex iConnect Pro By Timex fig 10

Note:
If the Stopwatch was paused when the display was showing a Split time, the first press of RESET/NEXT will show the final recorded time, and the second press will reset the Stopwatch to zero.

BATTERY

Timex strongly recommends that a retailer or jeweler replace the battery. If applicable, push the reset button when replacing the battery. Battery type is indicated on the case back. Battery life estimates are based on certain assumptions regarding usage; battery life may vary depending on actual usage. DO NOT

Note:
The Alarm ON (ALM or ) will flash to confirm Snooze mode.

INDIGLO® NIGHT-LIGHT

Press the INDIGLO® button to illuminate the watch display for 2-3 seconds. Electroluminescent technology used in the INDIGLO® night-light illuminates the watch face at night and in low light conditions.

How do I set up my Timex Marathon digital watch?
Please carefully read the instructions on how to operate your Timex® watch. Press MODE again to switch between modes: Alarm, Stopwatch, and Second Timer. Press the MODE button to exit the current mode and return to the clock mode. To set the time and date: 1) When the time and date are displayed, press and hold the SET button for 2 seconds.

Is marathon a good name?
When you think of Marathon watch brands, you probably think of military watches. In fact, the brand is an excellent example of combining functionality and functionality to meet the needs of military watches. That said, Marathon makes some of the best military watchmakers on the market.

Product specifications

Brand, Seller, or Collection Name Marathon by Timex
Model number TW5K94800
Part Number TW5K94800M6
Item Shape Round
Dial window material type Acrylic
Display Type Digital
Clasp Buckle
Case material Resin
Case diameter 43 millimeters
Case Thickness 15 millimeters
Band Material Resin
Band size Mens Standard
Bandwidth 15 millimeters
Band Color Black
Dial color Gray
Bezel material Resin
Bezel function Stationary
Calendar Day-Date
Special features Chronograph
Item weight 1.76 Ounces
Movement Quartz
Water resistant depth 50 Meters

WARNING: TO MAINTAIN WATER RESISTANCE, DO NOT PRESS ANY BUTTONS UNDER WATER.
The watch is water-resistant only as long as the lens, push buttons and case remain intact. 2. Watch is not a diver watch and should not be used for diving. 3. Rinse the watch with fresh water after exposure to salt water. 4. Shock resistance will be indicated on the watch face or case back. Watches are designed to pass the ISO test for shock resistance. However, care should be taken to avoid damaging the crystal/lens.

REFERENCE LINK

https://www.timex.com/marathon-by-timex-digital-full-size/T5K3599J.html

Download PDF

Timex Marathon Digital Watch

Buy Related Product on Amazon

Buy on Amazon

Leave a Reply