Table of contents
show
Brinno TLC120/TLC120A Time Lapse Camera
z`
z`Camera Parts
- Shutter Button
- Strap Eyelet
- Memory Card Cover
- 3-1. Micro USB Socket
- 3-2. SD Card Slot
- Status LED Indicator
- Wi-Fi / Bluetooth Lamp
- Power ON/OFF Switch
- Lens
- Tripod Mount
Status LED Indicator
Red (Battery):
• Battery Low
• SD Card Error
Green (Recording)
Blue (Wi-Fi/BLE):
• Wi-Fi/ BLE ON: on
Installing the SD Card
Charging the Camera Battery
Charging the camera via a Micro USB adapter (Camera should be turned Off)
- * First time battery charge requires 6 hours.
- ! * Battery charging, LED Orange. / Battery full, LED green.
Power on the Camera
Connecting_(AP (Access Point) Mode)
Step-1 On your phone settings,
- Turn ON Bluetooth
- Turn ON Wi-Fi, select your
camera Wi-Fi SSID (TLC120-XXXXXXXX) Password: 12345678
Step-2 On your camera APP,
- Tap camera icon ,
- Select your camera ID then\ tap “CONNECT”.
- You will see the Main Screen, now have fun with your Brinno time lapse camera.
Main Screen
- Scene Setting
- Time Interval Setting
- Playback Rate Setting
- Exposure
- Menu
- Photo Shooting
- Start/Stop Recording
- Playback
- White Balance Mode Status
- HDR Range Status
- Time Stamp On
- Timer On
- Battery Status
- Storage Status
Setting Screen
- Image Quality
- HDR Range
- White Balance
- Custom Image
- Time Stamp
- Timer
- Low Light Recording
- LED Indicator
- Band Filter
- General Settings
Start/Stop recording with App
To Start Recording:
- Tap “SHUTTER” Icon to start recording.
- Video is recording, WiFi will turn “OFF” to save power. You can leave APP, when screen shows “REC”.
To Stop Recording:
- Tap “STOP” Icon to stop recording.
- Wi-Fi connected.
- Wi-Fi signal lost You should go to your phone setting to connect WiFi again then back APP
Start/Stop recording without App
To Begin Recording
Hold the shutter button for 0.5 seconds to start recording
To Stop Recording
Hold the shutter button for 2 seconds to stop recording,
Download Pdf Link
