Table of contents
show
Tnicer R3 Motorcycle Helmet Camera User Manual
Package List
- R3
- Fixed base
- Helmet bracket kit
- Waterproof charging cable
- Handlebar mounting bracket
- Data Cables
- 3M Fixing Adhesive
- Velcro
Product Introduction Diagram
How to Use the R3 Motorcycle Helmet Camera
Charging the Camera
- Connect the included USB cable to a charger or PC.
- Charge fully before first use—indicator lights will show charging status.
Inserting the Memory Card
- Use a microSD card (Class 10 recommended, up to 128GB).
- Insert the card into the designated slot until it clicks.
Mounting the Camera
- Use the included mounts to attach the camera securely to your helmet.
Ensure the lens is positioned correctly for optimal field of view.
Powering On and Recording
- Hold the power button until the LED turns on.
Press the record button to start capturing your ride.
Connecting via Wi-Fi
- Enable Wi-Fi on the camera.
- Connect your phone to the R3’s Wi-Fi network.
- Open the recommended app to preview footage, download videos, and adjust settings remotely.
Turning Off the Device
- Hold the power button again until the camera shuts down.
- Using the R3 is designed to be seamless, even for beginners. Whether you’re commuting or going on long rides, this camera has your recording needs covered.
Installation Methods
Memory card installation method Open the back cover and insert the card with the text portion facing up
Helmet Bracket
- Press the mounting base firmly onto the bottom of the R3 so that the R3 is tightly seated against the base.
- Press the two parts in the helmet bracket kit into place by aligning the grooves as shown.
- Tighten the screws in the holes.
- Insert the assembled bracket parallel to the base.
- Attach the 3M fixing adhesive to the base.
- Align the bracket with the holes in the R3 mounting base and tighten then peel off the 3M adhesive cover film to stick it to the helmet.
Handlebar Bracket
- Press the mounting base firmly onto the bottom of the R3 so that the R3 is tightly seated against the base.
- Align the bracket with the holes in the R3 mounting base and tighten it to complete the installation, then you can snap it onto the handlebar.
Velcro
- Wipe the spot where you want to mount the R3 and attach the velcro to it.
- Align the bottom of the R3 with the velcro and press firmly to complete the installation.
Operation of Recording Functions
- Power On: Long press the power button for 3 seconds, until the video recording indicator red light is on and flashing regularly.
- Turn on WIFI: Under the power-on state, short press the power button once, the device will enter the pause recording state, and will turn on the WIFI, at this time the indicator blue light flashes regularly.
- Connect to cell phone: Open WIFI in the settings of cell phone, select “TNICER R3_ XXXXXX” in the list to connect, enter the password. 12345678″ to complete the connection. After successful connection, the device indicator light will be on, and then you can open the camera APP.
- APP operation: Press the start recording button in APP, the device will start recording and turn off WIFI after 5 seconds.
- Shutdown: Long press the power button for 3 seconds to shutdown the device in any power-on state.
Features
- Full HD Video Recording: Records in crisp 1080p resolution, ensuring every detail of your ride is captured with clarity.
- 120° Wide-Angle Lens: Offers an expansive field of view, perfect for capturing scenic rides and monitoring road surroundings.
- Loop Recording Function: Automatically overwrites older footage, so you never run out of storage during long rides.
- Wi-Fi Connectivity: Lets you connect your smartphone to the camera for live previewing and file transfer via the companion app.
- Built-in Microphone: Records ambient sounds and voice clearly while riding.
- Compact and Lightweight Design: Mounts easily on any standard motorcycle helmet without causing discomfort or adding bulk.
- Rechargeable Battery: Powered by a USB-charged lithium battery that lasts through long road trips.
- Simple One-Button Operation: Start and stop recording with just a press, making it user-friendly even with gloves on.
Product Specification
| Main Chip DSP | Nt96675 640MHz CPU |
| Sensor | Sony 1/2.9 in CMOS |
| Lens Angle | 120°/6G/1.8 aperture |
| Recording Resolution /Frame Rate | 1920*1080P/30FPS |
| 1280*720P/30FPS | |
| Compression | H.264/H.265 |
| Video File Format | MP4/TS |
| G-Sensor | Built-in Emergency Recording & Sensitivity 16-position Adjustment |
| Storage Method | Max 64G Micro SD/Class 10 |
| External Power Input | DC IN: SV |
| Recording Audio | Mono Channel |
| Battery Specifications | 3.7V/750mAh |
| Recording Time | 1920*1080P/30FPS 180min(+/-10%) |
| 1280*720P/30FPS 180min(+/-10%) | |
| Waterproof rating | IPX6 |
| External Dimension | 90*36*27mm |
| Unit Weight | 60g±S |
| Working Temperature | -10°c to + 60°c |
| Storage Temperature | -20°c to +10°c |
| Battery Playback Software | GOM Player.KM Player. Media Player |
Troubleshooting Guide
| Position | Possible Causes | Solution |
| Unable to turn on the device | Insufficient power | Charge the device. |
| Device cannot be operated | The system has stopped running | Press the reset hole with ejection pin and turn on the device. |
| Red and blue lights flash rapidly | Insufficient power | Charge the device. |
| Green light flashes 3 times and then power off | Memory card format error | Formatting the memory card |
| Computer can’t recognize the device | Defective data cable | Replace data cable |
| Computer BIOS Disable | Turn BIOS Enabled | |
| Device not powered on | Turn on the device | |
| Computer’s USB port defective | Try another USB port | |
| Red light is off, green light is flashing fast | Memory card not installed | Insert memory card |
FAQS
Where do you put the camera on a helmet?
- Bike users attach the adhesive mount on the top or to either side of the helmet.
How do helmet cameras work?
- Attached to a helmet allowing someone to make a visual record from their point of view (POV), while keeping their hands and vision free.
Is a helmet a safety device?
- Safety helmet and hard hat are the two primary types of headgear
How should helmet fit on head?
- The helmet should sit level on your head and low on your forehead— one or two finger-widths above your eyebrow.
How do you adjust a helmet?
- And you see that this is right under her ear. And that’s the perfect way to do it. Then okay we turn around and we do the other side. And you can see that this is way down here below her ear.
What is the new rule for helmets?
- Both the rider and the passenger must wear helmets with straps to keep them in place during a crash.
Do helmets protect you?
- Studies have shown that wearing a helmet reduces your risk of a serious brain injury and death
Do helmets prevent accidents?
- Helmets provide equal levels of protection for crashes involving motor vehicles (69%) and crashes from all other causes (68%).
What are the advantages and disadvantages of helmets?
- While full-face helmets provide excellent frontal protection, the limited peripheral vision can make it harder to spot vehicles approaching from the sides