ION Audio Total PA Ultimate User Manual
GETTING STARTED
- REGISTER YOUR PRODUCT
- DOWNLOAD THE USER GUIDE
- SIGN UP FOR THE NEWSLETTER
PLUG IN AND POWER ON
ION SOUND CONTROL™ APP
Connect to the ION SOUND CONTROL™ App for a more dynamic experience:
- a. Connect the phone to the speaker via Bluetooth® (Step 4)
- b. Download the App from the Apple App Store or Google Play Store
- c. Open the Ann on vour device.
CREATE YOUR SOUND EXPERIENCE
BLUETOOTH
- When first powering on, the speaker will enter Bluetooth mode; otherwise, press SOURCE until the display shows “bLUE”,
- Choose “PRO GLOW EXPRESS” in your Bluetooth settings menu.
- Press Play in the music player App of choice on the device.
- Make sure the device volume is turned up.
AUX IN
- Press the SOURCE button on the product or select AUX in the App.
- Plug any sound source into the AUX input with a 1/8″ cable (not included).
- Make sure the source device volume is turned up.
MIC INPUT
- Plug the mic into the MIC input and turn the MIC switch to ON.
USB PLAYBACK
- Insert a USB drive (not included) with MP3 files on it (16 GB max).
- Press the SOURCE button on the product or select USB in the App.
- Press PLAY/PAUSE and </> to control tracks.
- Press the REPEAT button to choose playback mode (see User Guide).
CUSTOMIZE YOUR SOUND EXPERIENCE
CONTROL KNOB
- Rotate to adjust the overall Main Volume (all channels).
- Push to select MIC to adjust MIC Input Volume.
Push to select SOURCE to adjust Bluetooth, Aux, or USB volume. - Push to select ECHO to adjust the echo effect on the mic.
- Push to select LOW or HIGH to adjust EQ settings.
LIGHT MODES
- Press the LIGHTS button or use the App to cycle through five light modes, or to turn the lights off.
STEREO-LINK™
- See the User Guide or App for link instructions to connect to another PRO GLOW™ EXPRESS.
Important:
To ensure stability if mounting the speaker on a stand, fully tighten the speaker mounting knob to secure it to the pole.
Important Safety Instructions
- Read and keep these instructions. Heed all warnings and followed all Instructions.
- Warning (if applicable): Please refer to any important information (e.g., electrical, safety, etc.) printed on the exterior bottom enclosure or rear panel before installing or operating the product.
- Clean only with a dry cloth.
- Water and Moisture (if applicable): Do not use this apparatus near water. Electrical equipment should NEVER be kept or stored in damp environments.
- (If applicable) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- (If applicable) This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit.
- (If applicable) Be careful not to damage the power cord.
- Only use attachments/accessories specified by the manufacturer.
- (If applicable) Use only the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
- Do not attempt to alter this yourself.
Safety Notices
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
DANGEROUS VOLTAGE:
The lightning flash with the arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
INSTRUCTIONS:
The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this appliance.
CAUTION (for U.S.A. & CANADIAN models only):
TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE
NOTICE CONCERNING FCC REGULATIONS:
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- (a) reorient or relocate the receiving antenna;
- (b) move this unit;
- (c) increase the separation between the equipment and receiver;
- (d) be sure that all cables are properly shielded, using a choke or ferrite where appropriate; or
- (e) consult the dealer or an experienced radio/television technician for help.
For Canadian models:
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development (ISED) Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Under ISED regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by ISED. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by ISED to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
This unit does not exceed the Class B limits for radio noise emission from digital apparatus set out in the radio interference regulations of the Canadian Department of Communications. This device operates on a no-protection, noninterference basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio license is required. For further details, consult Innovation, Science and Economic Development Canada’s document Client Procedures Circular CPC-2-1-28, Voluntary Licensing of Licence-Exempt Low-Power Radio Apparatus in the TV Bands.
For wireless products supporting the 5.15–5.35 GHz frequency band (if applicable):
Usage of the 5.15–5.35 GHz band is restricted to indoor operation only. This applies to the following countries: AT, BE, BG, CZ, DK, EE, FR, DE, IS, IE, IT, EL, ES, CY, LV, LI, LT, LU, HU, MT, NL, NO, PL, PT, RO, SI, SK, TR, FI, SE, CH, UK, HR. For 240-volt use in the U.K., use NEMA®-style 240-volt plug. For other countries use the proper plug for a local outlet.
ESD/EFT Warning:
This unit may contain a microcomputer for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lock up. In the unlikely event that this should happen, turn off the unit, wait at least five seconds, and then turn it back on again. The pins of connectors identified with this ESD warning symbol should not be touched.
If the product or remote control contains a coin/button-cell battery:
Warning: Do not ingest the battery—chemical burn hazard. If a coin/button-cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. Tell others about the risks associated with button batteries and how to keep their children safe. If a battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous.
Disposal of Batteries (if applicable):
Never dispose of any types of batteries in fire or near excessive heat or direct sunlight. Overheated batteries can rupture or explode. If you are unsure of how or where to dispose of a battery, refer to your local ordinances for the proper location, method, etc.
- Alkaline batteries & lithium button cell batteries: You can safely dispose of alkaline and lithium button cell batteries with normal household waste. They do not pose a health or environmental risk during normal use or disposal. (Alkaline batteries are composed primarily of common metals like steel, zinc, and manganese.) Do not dispose of large amounts of alkaline or lithium button cell batteries in a group. Used batteries are often not completely “dead.” Grouping them together can bring these “live” batteries into contact with one another, creating safety risks. To avoid this, insulate each battery with tape or other non-conductive material to ensure it does not discharge. Proven cost-effective and environmentally safe recycling processes are not yet universally available for alkaline and lithium button cell batteries. Some communities offer recycling or collection of these batteries. For more information, refer to your local ordinances or contact your local government.
- Lead-acid batteries: Dispose of lead-acid batteries by bringing them to an electronic waste center or recycling center, or dispose of them in accordance with your local ordinances. (Rechargeable lead-acid batteries are the same type used in automobiles and should be disposed of in a similar fashion.)
REFERENCE LINK
https://www.costco.com/ion-audio-total-pa-ultimate.product.4000114129.html
