Gopro Touch LCD BacPac User Manual
Firmware Update
To determine if a firmware update is required, please follow these steps:
- With the camera fully charged, attach the LCD BacPac™ to the camera and power the camera on (see attachment instructions on page 4). If the LCD screen powers on, you have the latest firmware and no update is needed.
- If the LCD BacPac does not power on, then you will need to download and install the latest firmware for your camera at: gopro.com/firmware.
LCD BacPac Features
- Seamlessly attaches to the back of HD HERO cameras.
- LCD screen allows for easy visual control of the camera and settings.
- Fast forward + fast rewind photos and video.
- Integrated speaker for sound.
ASSEMBLING YOUR LCD SCREEN to HD HE
- Slide the hooked end of the BacPac (A) into the groove on the right side of the camera body (B).
- Push the BacPac connector (C) into the HERO Bus port (D) on the back of the camera.
Removing LCD BacPac from HD HERO
- Pull back on the left side of BacPac marked with the arrow to disconnect from the HERO bus port.
- Slide hooked end of BacPac (A) out of camera groove (B).
Swapping housing doors
To secure the HD HERO & LCD BacPac assembly into the housing, you will need to replace the standard back door with one of the included extended back doors. A total of 4 doors are supplied with the LCD BacPac; 2 waterproof doors (standard + wrist housing models) and 2 non-waterproof doors (standard and wrist housing models). The skeleton doors allow for better audio and camera cooling when waterproofing is not needed.
- 0pen the backdoor of the housing so that it is hanging downwards.
- Pull downwards on the backdoor until it snaps free from the hinge.
- Line up the replacement backdoor into the hinge opening.
- Push upwards on the backdoor until it clicks into place.
USING THE LCD
BacPac The camera’s default setting keeps the LCD screen powered on. Below are options to change how the LCD powers off. Camera set menu OPTIONS — LCO and LCF Check Page 2, section “Firmware Update”, to ensure your camera has the necessary firmware update for your LCD screen. If so, proceed to Steps 1 & 2 below
- LCO (default): LCD ON. This setting keeps the LCD screen powered on, continuously, while the camera is on. LCD will only power off if the camera is turned off or if you quickly press the side LCD button.
- LCF: LCD OFF. This setting auto-powers the LCD screen off 60 seconds after the last camera button press. The camera will remain on and only the LCD will power off. If recording videos or photos, the recording will continue uninterrupted while the screen is powered off. A quick press of any button will power the LCD screen back on.
Playback Photos
- Press and hold the LCD button for 2 seconds to enter the LCD menu.
- Press power/mode button once to highlight the ‘PHOTO’ menu option.
- Press the shutter button and the first recorded photo will automatically be displayed.
- Press the power/mode button to advance to the next photo. Hold down the power/mode button to fast-forward through photos.
- Press the shutter button to go back to the previous photo. Hold down the shutter button to fast reverse through photos.
Playback Videos
- Press and hold the LCD button to enter the LCD menu.
- ‘VIDEO’ should already be highlighted.
- Press the shutter button and the first recorded video will automatically start playing.
- During video playback, press and HOLD the power/mode button to Fast Forward the video playback. Releasing the power/mode button will resume normal playback.
- During video playback, press and HOLD the shutter button to Rewind the video playback. Releasing the button will resume normal playback.
Important Safety and Handling Information
WARNING:
Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage to the LCD BacPac or other property.
Handling
The LCD BacPac contains sensitive components. Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, or insert foreign objects into the LCD BacPac. Do not use the LCD BacPac if it has been damaged—for example, if LCD BacPac is cracked, punctured, or damaged by water. The LCD screen is made of glass.
This glass could break if the BacPac is dropped on a hard surface without the warehousing or receives a substantial impact or is crushed, bent, or deformed. If the glass chips or cracks do not touch or attempt to remove the broken glass. Glass cracked due to misuse or abuse is not covered under the warranty.
Warranty
This product is guaranteed against manufacturing defects for one (1) year from the original date of purchase. GoPro’s sole obligation in the event of such defects during this period is to repair or replace the defective part or product with a comparable part or product at GoPro’s sole discretion. Except for such replacement, the sale, or other handling of this product is without warranty, condition, or other liability even though the defect or loss is caused by negligence or other fault. Damage resulting from use, accident, or normal wear and tear is not covered by this or any warranty.
GoPro assumes no liability for any accident, injury, death, loss, or other claim related to or resulting from the use of this product. In no event shall GoPro be liable for incidental or consequential damages relating to or resulting from the use of this product or any of its parts. Because of possible user resealing errors, this product is not warranted against warehousing leakage or any resulting damage. Visit gopro.com for more information.
