SoundPeats True Wireless Bluetooth 5.0 Earbuds User Manual
Pairing
- When the charging case is powered, open the charging case, then both earbuds will enter pairing mode automatically. You will see the indicators flashes in blue and white.
- Activate Bluetooth on the device, and choose “SOUNDPEATS T2” on Bluetooth list to pair.
Reset
- Place back both earbuds into the charging case and make sure they are in charging status.
- Click both multifunctional buttons five times until LED indicators of earbuds flashes in blue and white twice.
Wearing
Product Diagram
Button Control
Q&A
Q1: What do the charging LEDs tell while charging the case?
When the left earbud is placed into the charging case, the first LED indicator flashes, which means the left earbud in charging status. When the right earbud is placed into the charging case, the third LED indicator flashes, which means the right earbud in charging status. When both of the earbuds are placed into the charging case, the first and third LED indicators flashing, which means both earbuds in charging status consistently.
Q2:When charging for the charging case, what’s the LED lights indicate?
When the battery level of the charging case is 0%-19%, The first LED at the bottom flashes in white When the battery level of the charging case is 20%-69%, The first LED at the bottom lights up in white And the second LED flashes in white When the battery level of the charging case is 70%-99%, The second LED at the bottom light up in white And the third LED flashes in white When the battery level of the charging case is 100%, All three LEDs at the bottom light up in white
Q3: What shall I do to charge for the charging case?
- Connect the charging port with Type-C charging adapter.(Please make sure the current is not Greater than IA) If the LED indicators flash, which means a charging status.
- Please charge the case at least once every 3months when not in use for a long time.
Q4:Why are the earbuds still connected to my phone after placing back?
- The charging case is out of battery. The case will not turn off the earbuds if the case battery dead.
- Please make sure the earbuds are placed properly in the charging case.And wipe the charging metal sheet and pin needle with a microfiber cloth to keep charging connectors on both the earbuds and charging case clean.”
Q5: Why the battery life is not as advertised?
A single charge of the earbuds will not give you 30 hours playtime constantly. The earbuds work around 10 hours per charge with average use. The charging case provides another 2 recharges.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
DOWNLOAD PDF LINK
