Table of contents
show
Taotronics TT-SK023 Soundbar Wireless Bluetooth User Manual
Product Diagram
- Power Button
- Mode Selection
- Volume +
- Volume –
- Optical
- AUX
- Bluetooth
- Games
- Music
- Video
- Optical Input
- AUX Input
Remote Control
- Power Button
- Bluetooth Mode
- Optical Mode
- AUX Input
- Next Track
- Music Mode
- Previous Track
- Play / Pause
- Games Mode
- Video Mode
- Volume –
- Volume +
- Mute
Package Contents
- 1 x TaoTronics Sound Bar (TT-SK023)
- 1 x Remote Control
- 1 x RCA to 3.5mm Audio Cable
- 1 x Optical Cable
- 1 x User Guide
- 2 x Wall Mount Screws
Button Control
| Power On / Off | Press the Power Button and the mode indicator will light up / go off on the display. |
| Volume + | Press the Volume + button |
| Volume – | Press the Volume – button |
| Mode Selection | When the sound bar is on, press the correspond- ing mode button to select the Optical / AUX / Bluetooth / Games / Music / Video mode, and the corresponding indicator will light up. Press the Mute button to mute / unmute |
| Mute |
Specifications
| Power Supply | 100-240V; 50 / 60Hz |
| Power Consumption | 40W |
| S/N | ≥70dB |
| Response Frequency | 60Hz-20KHz |
| Working Temperature | -10°C – 35°C / 14°F-95°F |
| Dimensions | 80 x 6 x 6 cm / 31.5 x 2.4 x 2.4 in |
| Weight | 1765g±5g / 61.6oz |
Connections
Cable Connection
Note: Please plug the appropriate cable into the corresponding port to connect the device, then select the corresponding mode.
Bluetooth® Connection
- Turn on the sound bar and select the Bluetooth® mode.
- Activate the Bluetooth® function on your device and search for devices nearby.
- Find “TaoTronics TT-SK023” in the search results and tap to connect. A beep will be heard upon a successful connection.
- The Bluetooth® indicator will turn solid on upon a successful connection.
Note:
- The Bluetooth indicator will keep flashing when the sound bar is pairing.
- Please make sure no other active Bluetooth® devices are within range, and that the sound bar is within 3ft / 1m away from your device.
- It’s not recommended to pair the sound bar with your TV Bluetooth for it may cause audio delay.
- Before starting to play via Bluetooth, please lower the volume to a moderate level.
Troubleshooting
Why is the unit not turning on?
Please check and make sure the power cord is correctly connected to a power source.
Why is there no sound or why is the sound is distorted?
Please go over the following:
- Check to make sure the audio cable is correctly connected.
- Turn up the volume slowly.
- Press the Mute button to switch on the sound.
- Press the Play / Pause button.
- Set the audio output mode on your TV (if applicable) accordingly with the mode setting on the sound bar.
Why do the buttons on the sound bar not work?
Switch off the sound bar and unplug. Then connect it to a power supply and switch it on again.
