Taotronics TT-SK027 Gaming Computer Speaker User Manual
PACKAGE CONTENTS
- 1 x Power Adapter
- 1 x 3.5mm Audio Cable
- 1 x User Guide
- 1 x TaoTronics Sound Bar (Model: TT-SK027)
- 1 x Thank You Card
PRODUCT DIAGRAM
- Speaker
- LED Display
- Power Button
- Volume +
- Volume –
- Play / Pause
- Timer Button
- LED Mode Button
- AUX Input port
- AUX Output Port
- Power Port
- Mount Holes.
- Rubber Feet
IMPORTANT SAFETY INSTRUCTIONS
Please read the instructions thoroughly before using this product and retain it for future reference.
Warning
- Never place the Sound Bar near the heat sources.
- Only use this Sound Bar indoors.
- Never place this Sound Bar on other electrical equipment.
- Keep the product clean and dry. Do not clean the product with detergent containing alcohol, ammonia, benzene, or abrasives.
Caution
- Do not expose this product to high temperatures.
- Store this product in a dry place. Keep it away from humidity and corrosives.
- Do not immerse the Sound Bar in water or expose it to humidity for a long time.
- Avoid dropping.
- Close attention is needed when using near children.
- Unauthorized disassembly of any parts of this product is forbidden.
- Always ask a professional technician or authorized personnel for repair.
BUTTON CONTROL
| Function | Operation | Voice Prompt |
| Power On / Off | Press and hold the Power Button for three seconds | Beep sounds |
| Mode Change (BT / LINE ) | Press the Power Button when the speaker is on | / |
| Play / Pause | Press the Play / Pause button | / |
| Go into Pairing Mode | Press and hold the Play / Pause button | / |
| Successful Connection | / | Beep |
| Volume + | Press the Volume + button | Toots when highest setting is reached |
| Volume – | Press the Volume – button | / |
| Next Track | Press and hold the Volume + button under the Bluetooth mode | / |
| Previous Track | Press and hold the Volume – button under the Bluetooth mode | / |
| Start / Pause Timing | Press the Timer button | / |
|
Set the Light Mode | Press the LED Mode button to choose the following four light modes: ① Color carousel: where the light will cycle through different colors ② Breathing mode: where the light will cycle through different colors in a rhythm resembling human breathing ③ Rhythm mode: where the light color and brightness will change automatically with the music you are playing ④ Turn off the light |
/ |
| Answer / Hang up Phone Call | Press the Play / Pause button | / |
| Decline an Incoming Call | Press and hold the Play / Pause button | / |
LED INDICATION
| Operations | LED Status | |
| Power on | Enter color carousel by default with the LED display fast flashing | |
| Bluetooth Connection | Pairing | LED display fast flashes |
| Connected | LED display solid on | |
HOW TO USE
Place the unit
Place this unit on top of a table or mount it on the wall.
Note:
- The mounting screws are not provided.
Never place this unit in an enclosed cabinet when the sound bar is playing.
Install this unit near the AC outlet where the AC power plug can be easily reached.
Bluetooth Connection
Plug the soundbar to power, and press, and hold the Power Button for three seconds until the beep sounds are heard. The device is in the Bluetooth mode initially.
When the LED display starts to flash fast, activate the Bluetooth function on your device and search for Bluetooth connections nearby.
Find “TaoTronics TT-SK027” in the search results and tap to connect.
A beep will be heard upon a successful connection.
Note:
- When it’s powered on, the soundbar will automatically connect to the device last paired if any. Otherwise, it will enter the pairing mode with the LED display blinking fast.
- To change the connection, press and hold the Play / Pause button to enter the pairing mode and connect to another device.
Timer Button
- Press once to start/pause timing.
- Press twice to clear the timer display and set it to “00:00”.
- Press and hold to exit timer mode and back to the previous working and display modes.
AUX Cable Connection
Plug the AUX cable into the AUX input port at the back.
Press the power button to change to LINE mode, and the LED display will show “LINE”.
Connect to an AUX device via the cable.
Note:
- Once connected to the AUX Output port, the sound will be bypassed to the audio device connected.
CLEANING AND MAINTENANCE
- Clean the Sound Bar on a regular basis.
- Use a dry and soft cotton cloth to wipe the unit.
- Keep away from sharp objects to avoid scratches.
- Put the unit in a dry and shady place if it is to be idle for a long time.
- Do not clean the product with detergent or chemicals.
Note:
- Do not insert anything into the product.
WARRANTY AND SERVICE
If any problems occur, please contact the TaoTronics Customer Care Centre in your country via the contact information listed in this User Guide.
