HAVIT TW935 Wireless Stereo Earbuds
Product and Accessories
Description of the Product Structure
- Power LED indicators
- Multi-function button (MFB)
- LED indicator
- Charging port
Wearing method
Gently cram the earbuds into the cochlea, then adjust the appropriate angle.
Functions
Power on, Bluetooth connection
Firstly, confirm that your mobile phone has built-in Bluetooth.
- Power on
Method 1: Remove earbuds from the charging case.
Method 2: If earbuds are power off outside the case, long press the MFB for 3 seconds on both sides to turn then on. When one earbud indicator starts flashing alternately with orange and white and the other earbuds indicator is off, the product is ready for use. - Turn on Bluetooth on your device and select “Havit TW935” referring to your phone instructions.
- Pairing mode can just last 180 seconds. If you miss the pairing time, you need to restart the device and operate follow the procedural steps mentioned above.
Note:
- a) Havit TW935 remembers previously connected devices. When turned on, earbuds attempt to reconnect to previously connected devices.
- b) Havit TW935 will lose the connection when deviate the working range of Bluetooth. The earbuds will reconnect automatically if you come back to the range in 3 minutes.
Power off
Method 1: Put the earbuds into the charging case, they will automatically shut off.
Method 2: Long press left/right MFB for 5 seconds to turn them off.
Answering incoming calls
Short press left or right MFB to answer incoming calls.
End the call
Short press left or right MFB once to end the current call.
Decline incoming calls
Long press left or right MFB for 2 seconds to reject a call.
One key for voice assistant
Press the left or right MFB twice to activate voice assistant.
Music playing
- Play/Pause: Short press the left or right MFB once;
- Previous song: Long press the left MFB for 2 seconds
- Next song: Long press the right MFB for 2 seconds
Mono mode
Take out any earbuds as a unilateral Bluetooth earbud.
Note: Single channel mode only needs to remove one of earbuds from the charging box; if two earbuds are removed before connection, the earbud will be used in TWS mode by default, and the TWS connection will be automatically realized.
- Take out an earbud from the charging case, the earbud turns on automatically and reconnects to previously connected devices.
- Switch from one earbud to the other when playing music, taking out the other earbud from the charging case and these two earbuds will connect automatically. Both earbuds will play music, then put the earbud, which is not needed anymore, into the charging case and the switching process completes.
Note: Call mode is applicable. - Please refer to the TWS mode for more functions.
Restore factory settings
If the earbuds cannot pair or disconnect frequently, please restore the factory settings.
Take out both earbuds from the charging case. Click the left earbud’s MFB twice, when one earbud indicator starts flashing alternately with white and orange and the other earbud indicator is turned off, the reset is completed.
Charging
Case
Charge the case using the micro USB cable connected to a computer or wall charger. The indicator in the charging case flashes white when charging and turns to be steady white when fully charged. Charging time is approximately 2 hours.
Earbuds
Put the earbuds back into the charging case for charging. While charging, the indicator light turns to white. After full charge, the white light turns off.
Specifications
- Bluetooth version V5.0
- Earbud battery 30 mAh ×2
- Charging case battery 250 mAh
- Play time 3 hours
- Talk time 3 hours
- Charging time About 1 hour
Safety Warnings
- Read these safety instructions carefully.
- Keep these safety instructions.
- Pay attention to all warnings.
- Follow all instructions.
- Clean the earplugs only with dry cloth.
- Danger of suffocation: The device contains small parts and is not suitable for children.
- Do not place the device near heat sources such as radiators, regulators hot air, fireplaces or heat-generating speakers (including amplifiers).
- Do not use the device in places where you need to focus on your surroundings, such as while driving a car and the like.
- Do not immerse the device in water or expose it to a humid environment for a long time. Do not use it while swimming or surfing.
- High music volume may cause hearing loss after some time. if you have after using an ear sound device tinnitus (ringing in the ears), pain or discomfort, the volume is probably too high for your ears.
- To prevent hearing loss, lower before connecting to a mobile phone volume of the music player, then gradually increase it to a comfortable volume.
- It is recommended to use the accessories specified by the manufacturer.
- Do not expose the battery to excessive heat such as sunshine, fire or the like.
- Make sure that the power supply is within the specified voltage range.
- If the device does not charge with AC power, unplug the cable from the USB-C interface.
- Rely on our staff. If a fault occurs on the device, it must be repaired by a professional. The headphones do not work properly when: the power supply is damaged cable or plug, there is water in the device, foreign objects have fallen into it, the device is exposed to rain or moisture or falling from a height.
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:
- Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation and service of the product.
- Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g. during transport, cleaning by inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (such as batteries, etc.).
- Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
- If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.
EU Declaration of Conformity
Identification data of the manufacturer’s / importer’s authorized representative: Importer: Alza.cz a.s.
- Registered office: Jankovcova 1522/53, 170 00 Prague 7
- IČO: 27082440
Subject of the declaration:
- Title: Wireless headphones
- Model / Type: Havit TW935
- The above product has been tested in accordance with the standard (s) used to demonstrate compliance with the essential requirements laid down in the Directive (s): Directive No. (EU) 2014/53/EU
- Directive No. 2011/65/EU as amended 2015/863/EU Prague, 23.9.2020
WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.
