Table of contents
show
AirFly Twelve South 12-1801 Bluetooth Transmitter User Manual
Pairing AirFly with AirPods
- To enter pairing mode on AirFly, press and hold the button for up to 10 seconds until AirFly flashes amber and white.
- While in pairing mode, other light patterns may appear. AirFly will cycle back to the pairing mode light pattern shortly after.
- To enter pairing mode on AirPods, first place AirPods inside Charging Case. With the lid open, press and hold the button on the back of the Charging Case until the light between the AirPods flashes white.
Once successfully connected*, the light on your AirPod case will turn green, and AirFly will illuminate in white and remain on for 10 seconds.
- This can take up to 90 seconds for initial pairing, but AirFly will remember your AirPods when re-connecting in the future.
- Plug one end of the headphone cable into AirFly and the other end into your preferred entertainment system.
Pairing AirFly with Wireless Headphones
- To enter pairing mode on AirFly, press and hold the button for up to 10 seconds until AirFly flashes amber and white.
- While in Pairing Mode, other light patterns may appear. AirFly will cycle back to the pairing mode light pattern shortly after.
- Put your headphones into Bluetooth Pairing Mode (refer to your headphone’s owners manual for more details).
- Once successfully connected*, AirFly will illuminate in white and remain on for 10 seconds.
- Plug one end of the headphone cable into AirFly and the other into your preferred entertainment system.
- This can take up to 90 seconds for initial pairing, but AirFly will remember your headphones when re-connecting in the future.
Charging AirFly
- The internal battery of AirFly lasts around 8 hours. We recommend fully charging AirFly before using it for the first time. If your AirFly is low on power, it will flash amber 3 times to alert you that it will need to be charged soon.
- To recharge, simply plug the included USB cable into AirFly and any powered USB port. AirFly is fully charged within 2 hours.
- While charging, the AirFly will illuminate in amber and stay on. Once fully charged, the amber light will turn off.
Tips & Tricks
- If only one AirPod seems to be playing audio, turn Airfly Off, then On again. This will re-sync AirFly and should reconnect both AirPods.
- If you’re having trouble successfully connecting AirFly to your headphones, try clearing the headphone pairing list. * Once cleared, AirFly will flash Amber and White and will then be in Pairing Mode.
- To do so, press the front button for 1 second, then short press twice.
Turning AirFly On & Off
- To turn AirFly on, hold down the button for up to 5 seconds until AirFly lights up.
- To turn Airfly off, hold down the button for 5 seconds. AirFly will blink amber twice and then power off.
Reconnecting AirPods / Headphones to iPhone
- Once paired, AirFly will remember your AirPods / Headphones and switch to them when the unit is turned on. To switch back to using your AirPods / Headphones with your iPhone, first turn off AirFly.
- On your iPhone, open Bluetooth Settings, and select your headphones from the list. Status will change from Not Connected to Connected once headphones are successfully paired with your iPhone.
Status Light Guide
Power On
Pairing Mode
Unconnected Standby Mode
Connected Standby Mode
Low Power
Charging
Fully Charged
White LED flashes twice
White & Amber LED flashes alternately
White LED flashes twice every 5 seconds
Solid White LED
Amber LED flashes 3 times
Solid Amber
Amber LED turns off
REFRENCE LINK
