Hoover UH72405 Air Steerable Pet Upright Vacuum User Manual

Hoover UH72405 Air Steerable Pet Upright Vacuum User Manual

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

• Fully assemble before operating.
• Operate vacuum only at voltage specified on data label on bottom of cleaner.
• Do not leave appliance when plugged in. Unplug from outlet when not in use and before cleaning or servicing.
• Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Not intended for use by children age 12 and under. Close supervision is necessary when used by or near children. To avoid injury or damage, keep children away from product, and do not allow children to place fingers or other objects into any openings.
• Use only as described in this manual. Use only manufacturer’s recommended attachments and products.
• Do not use product with damaged cord or plug. If product is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, call customer service at 55 2122 3480 prior to continuing use.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not place product on cord. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs. To avoid personal injury or damage, and to prevent the cleaner from falling, always place cleaner at bottom of stairs on floor. Do not place cleaner on stairs or furniture, as it may result in injury or damage.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or fine wood sandings, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without Dirt Cup and/or Filters in place.
• Unplug before connecting Pet Turbo Tool.

CAUTION: TO REDUCE THE RISK OF DAMAGE:

• Avoid picking up hard, sharp objects with this product, as they may cause damage.
• Do not use sharp objects to clean out hose as they can cause damage.
• Store appropriately indoors in a dry place. Do not expose machine to freezing temperatures.
• With brushroll on, do not allow cleaner to sit in one location for an extended period of time, as damage to floor can result.

WARNING:

• To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrican to install the proper outlet. Do not change the plug in any way.

VACUUM ASSEMBLY

CARTON CONTENTS

• A. Handle / Hose Assembly
• B. Wand
• C. Vacuum Base and Dirt Cup
• D. 2-in-1 Combination Tool
• E. Pet Turbo Tool*
• F. Extended Crevice Tool*
• G. Pet Upholstery Tool*
• H. Black Mesh Bag with Logo* Remove all parts from carton and identify each item shown. Make sure all parts are located before disposing of packing materials.

ATTACH HANDLE

• 1.2 Insert handle section into vacuum base.
• 1.3 To remove handle press button on back of unit and pull handle out of vacuum base.

ATTACH DIRT CUP

• 1.4 Place bottom of dirt cup into vacuum body first. Pivot cup into vacuum.

POSITION TOOLS

• 1.5 For storage mode, push dusting brush all the way down onto crevice tool.
• 1.6 Assemble combination tool onto post located on side of vacuum.

NOTE: On board storage is only available for the 2-in-1 combination tool.

HOW TO USE

VACUUM DESCRIPTION

1. D-Grip Handle
2. Short Handle Release Button
3. Wand
4. Dirt Cup Release Button
5. Carry Handle
6. Dirt Cup
7. Filter made with HEPA media
8. Brushroll Window
9. Hose Port (above floor cleaning)
10. ON/OFF Power Switch
11. Brushroll ON/OFF Switch
12. Cord Clip
13. Hose
14. Wand/Handle Release Button
15. Cord Release
16. Cord
17. 2-in-1 Combination Tool
18. Hose Connector
19. Furniture Guard
20. Rinsable Filter Access

Operate cleaner only at voltage specified on data plate on bottom of cleaner. This cleaner is intended for household use.

ON-OFF SWITCH

• Plug cord into electrical outlet.
• To turn vacuum ON, push ON/OFF switch (A) once. To turn vacuum OFF, push switch again.
• To turn brushroll ON, push ON/OFF switch (B) once. To turn brushroll OFF, push switch again.

NOTE: Brushroll does not run with vacuum in the upright position.

CARRY HANDLE

The cleaner can be moved by using the carry handle (C).

CORD STORAGE

• 2.4 Wrap cord on cord hooks for convenient storage. Attach the plug end to the cord.
• 2.5 Twist upper cord hook (D) to allow cord to be released.

HANDLE POSITIONS

• 2.6 The handle of your cleaner has two positions: upright for storage and when using cleaning tools; operating position for general operation on carpet and floors; hold nozzle with foot (E) and pull handle back.

CAUTION

Not to be used for grooming a pet.

HOSE AND TOOL USE

Tools allow for cleaning surfaces above the floor and for reaching hard to clean areas. The vacuum is ready for tool use when handle is in upright position.

WARNING

Unplug vacuum before connecting hose, wand or tools.

HOSE MODE (Above Floor Cleaning)

Cleaner must be in the upright position.

• 3.1 Remove the hose connector (A) from storage position.
• 3.2 Plug in hose connector by flipping down hose connector door (B) insert hose connector (A) until it clicks.

CAUTION !
Hose connector must be removed and placed back into storage position for general operation on floors.

HANDLES

D-Grip Wand/Handle Release 

• 3.3 Press handle release button down to release handle from unit.
• 3.4 Pull handle up and out of unit.
• 3.5 Hold handle wand by top of grip for easy reach cleaning. Tools can be attached to end of wand if desired.

CAUTION

Ensure end hose connector is plugged into hose port behind unit.

D-Grip Handle Release

• 3.6 Push button (A) to release handle grip.
• 3.8 Tools can be attached to short wand if desired.
• 3.7 Pull handle up and out of unit.

CAUTION

Ensure end hose connector is plugged into hose port behind unit.

SELECT PROPER TOOL 2-in-1 Combination Tool

• 3.9 Simply push the attachment firmly on the end of the wand or hose end. To remove tool, twist and pull apart gently and return to storage.
• A. Crevice Tool may be used in tight spaces, corners and along edges in such places as dresser drawers, upholstered furniture, stairs and baseboards.
• B. Dusting Brush may be used for furniture, table tops, books, lamps, lighting fixtures, venetian blinds, baseboards, shutters, and registers.
• C. Push lock button in to release dusting brush and slide down to revert to crevice mode.
• D. Pet Turbo Tool may be used for upholstered furniture, draperies, mattresses, clothing, and carpeted stairs. (Tool varies per model*)

STAIR CLEANING

• 3.10 The hose and tools can be used for stair cleaning.

CAUTION !
Use extra care when cleaning on stairs. To avoid personal injury or damage, and to prevent the cleaner from falling, always place cleaner at bottom of stairs or on floor. Do not  place cleaner on stairs or furniture, as it may result in injury or damage. When using tools, always ensure handle is in upright position.

HOW TO CLEAN TOOLS

To clean Hose and Air-Powered Hand Tool, wipe with a damp cloth. DO NOT submerge in water. Other cleaning tools may be washed in warm water with a mild detergent. Rinse and air dry 24 hours before using.

MAINTENANCE

Familiarize yourself with these home maintenance tasks as proper use and care of your vacuum will ensure continued cleaning effectiveness. This product contains no serviceable parts. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, call customer service at 55 2122 3480 prior to continuing use.

DIRT CUP: When to Empty

• 4.1 Empty the dirt cup before the dirt cup reaches the max line (A). Place the vacuum in the upright position before removing the dirt cup.

WARNING

To reduce the risk of personal injury – Unplug before cleaning or servicing. Do not use vacuum without dirt cup or filters in place. Very fine materials, such as face powder or cornstarch, may seal the filter and cause a reduction in performance. When using the vacuum for this type of dust, empty the cup and clean the filters often.

DIRT CUP: How to Empty

• 4.2 Press dirt cup release button and pivot cup out.
• 4.3 Hold dirt cup over trash receptacle, push dirt cup door release lever (A) to open dirt cup door (B). Close dirt cup door (B). Press firmly to secure.
• 4.4 Place bottom of dirt cup into vacuum body first. Pivot dirt cup into vacuum. Press down on the dirt cup release button to secure into place.

FILTERS: When to Clean

To maintain optimal performance, filters should be cleaned every two months under normal use.

WARNING

To reduce the risk of personal injury – Unplug before cleaning or servicing. Do not use vacuum without dirt cup or filters in place.

Rinsable Filter: How to Clean

Remove dirt cup as described in Fig. 4.2.

• 4.5 Twist the dirt cup lid to open.
• 4.6 Remove rinsable filter. Rinse with water for two minutes or until water runs clear. Then squeeze out excess water. Allow 24 hours for filter to dry completely. Replace filter. Close lid securely by twisting dirt cup lid until it clicks as shown in Fig. 4.5. Replace dirt cup as described in Fig 4.4.

Rinsable Filter: What to Buy

When used and maintained properly, your Rinsable Filter should not need replacement within the warranty period. If desired, additional filter is available. Ask for Hoover® Part No. 303903001.

IMPORTANT
Allow filter to dry completely before replacing. Dry filter on edge so air circulates on both sides of filter. This may take up to 24 hours.

Filter Made With HEPA Media: How to Clean

WARNING !

To reduce the risk of personal injury – Unplug before cleaning or servicing. Do not use vacuum without dirt cup or filters in place.

• 4.7 Remove dirt cup.
• 4.8 Unlock final filter cover by twisting filter counter-clockwise to remove.
• 4.9 Lift filter cover from the filter housing.
• 5.0 Pull filter out and hold over a trash receptacle. Tap out dirt and debris.
• 5.1 Replace filter cover by twisting clock-wise while it snaps in place.
• 5.2 Filter cover installed correctly when aligned with motorhousing. Replace dirt cup on vacuum.

IMPORTANT
DO NOT RINSE OR WASH THE FILTER CARTRIDGE.

Filter Made With HEPA Media: What to Buy

When used and maintained properly, your Filter should not need replacement within the warranty period. If desired, additional filter is available. Ask for Hoover® Part No. 440003905.

CYCLONIC FILTER ASSEMBLY: How to Clean

WARNING

• To reduce the risk of personal injury
• Unplug before cleaning or servicing.

Remove dirt cup as described in Fig. 4.5.

• 4.11 Lift the filter assembly (A) up out of the dirt cup.
• 4.12 Dirt and debris can be cleaned from the filter assembly with the dusting/ upholstery tool.
• 4.13 Place the filter assembly (A) in the dirt cup, aligning the D-shaped tab on the top of the dirt cup. Press down firmly to place the filter assembly back in place. Replace dirt cup lid. Replace dirt cup as described in Fig. 4.4.

BRUSHROLL: How to Clean

CAUTION !

• To reduce the risk of injury from moving parts
• Unplug before servicing.

• 4.14 Turn vacuum over so bottom side is facing up. Remove any debris and/or hair from brushroll. For further belt or brushroll maintenance, please call HOOVER® Customer Support at 55 2122 3480.
• 4.15 Vacuum is equipped with an automatic brushroll shut off in event of overload or jam.
• 4.16 To reset the brushroll, press the ON/OFF Brushroll switch OFF. Then press the ON/OFF Brushroll switch again to ON. After resetting the brushroll may still be blocked. Check for obstructions in the brushroll area and remove any obstructions.

TROUBLESHOOTING

If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the checklist below. This product contains no serviceable parts. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, call customer service at 55 2122 3480 prior to continuing use.

WARNING !
To reduce the risk of personal injury – Unplug before cleaning or servicing.

PROBLEM

• Vacuum won’t run
• Vacuum won’t pick up
• Low suction
• Dust escaping from vacuum
• Pet Turbo Tool* brushroll won’t turn
• Brushroll will not turn
• Smoky/burning smell detected

POSSIBLE CAUSE

• Power cord not firmly plugged into outlet.
• No voltage in wall plug.
• Blown fuse or tripped breaker.
• Thermal Protector activated.
• Automatic brushroll shut-off engaged
• Dirt Cup full and/ or clogged.
• Brushroll and/ or hose clogged.
• Rinsable filter and/ or filter made with HEPA media is dirty.
• Automatic brushroll shut-off engaged.
• Broken or worn belt.
• Dirt cup full.
• Dirt cup not installed correctly.
• Hose not installed correctly.
• Rinsable and/ or filter made with HEPA media not installed completely or missing.
• Too much pressure being applied to tool.
• Blockage.
• Low vacuum suction.
• Brushroll switch is off
• Brushroll is clogged.
• Brushroll does not work.
• Belt broken or stretched.
• Brushroll is clogged.

POSSIBLE SOLUTION

• Plug unit in firmly.
• Check fuse or breaker in home.
• Check fuse or breaker in home. Replace fuse/reset breaker in home.
• Unplug and allow vacuum to cool for 30min. (This willi reset the thermal protector)
• Press brushroll ON/OFF switch twice.
• Empty dirt cup – Pg.10.
• Check hose. Check brushroll – Pg.7-12.
• Clean rinsable filter and or filter made with HEPA media – Pg.10-11.
• Press brushroll ON/OFF switch twice.
• Replace belt – Pg. 13.
• Empty dirt cup – Pg. 10.
• Review dirt cup removal & replacement – Pg. 10.
• Review hose installation – Pg. 7-8.
• Review filter removal and cleaning – Pg. 10-11.
• Continue using tool applying light pressure.
• Remove blockage.
• Check items under “Vacuum won’t pick up or Low suction.”
• Press the brushroll on/off switch – pg 12
• Clear/ remove debris from brushroll – pg 12-13
• Unplug unit, wait 30 minutes – pg 4
• Replace brushroll belt – Pg. 12-13.
• Clear/ remove debris from brushroll – Pg. | 12-13.

REFRENCE LINK

https://hoover.com/

Buy Related Product on Amazon

Buy on Amazon