Urbanista London Active Noise Cancelling Earbuds User Manual
PAIRING MODE
FIRST TIME PAIRING
To connect the earphones to a Bluetooth device for the first time – open the charging case whilst the earbuds remain inside the case. The earphones will automatically enter pairing mode. Open Bluetooth settings on your device and select “Urbanista London”. You can now enjoy your music and make phone calls using your Urbanista London. If pairing is not established within 5 minutes, pairing mode is cancelled and the procedure must start over.
EARBUDS
- PLAY – Tap the logo (1) on the Left (L) earbud twice.
- PAUSE – Tap the logo (1) on the Left (L) earbud twice.
- VOLUME (+) – Tap the logo (1) on the Right (R) earbud.
- VOLUME (–) – Tap the logo (1) on the Left (L) earbud.
- ANSWER INCOMING CALL – Touch the logo (1) on the Left (L) or the Right (R) earbud twice.
- END A CALL – Touch the logo (1) on the Left (L) or the Right (R) earbud twice.
- REJECT A CALL– Touch and hold either the logo (1) on the Left (L) or the Right (R) earbud.
- SIRI – Touch the logo (1) on the Right (R) earbud twice.
- ACTIVE NOISE CANCELLING ON/OFF – Touch and hold the logo (1) on the Right (R) earbud for 2 seconds.
- AMBIENT VOICE MODE ON/OFF – Touch and hold the logo (1) on the Left (L) earbud for 2 seconds.
- EAR DETECTION – Built in sensors will make the music stop automatically if one earbud is removed from your ear. The auto play function will kick in once you put the earphone back in your ear and the music will start to play again. Once removed from your ear, the touch button function will be disabled. Phone calls will not be terminated although if one earbud is removed from the ear.
- BATTERY STATUS INDICATOR – After closing the lid of the charging case, the battery status indicator lights (3) will display the remaining battery level.
- LOW-BATTERY WARNING – When your battery power is running low, there will be a voice prompt “low battery” and 30 minutes playtime left before the earphones turn off automatically.
HARGING
The earbuds will charge automatically when placed in the case. The battery indicator lights (3) will flash once when the earbuds are placed in the case. The outer indicator lights will flash every 10 seconds until the earbuds are fully charged.
TO CHARGE THE CASE
Plug in the type-C cable to an energy source or place the case on any Qi-certified charging pad. The battery indicator lights will flash subsequently until fully charged. Once fully charged the battery indicator lights will be lit continuously. If the battery indicator lights do not work as described, disconnect the charger from the charging case and reconnect it.
SILICONE BUDS
The complimentary silicone ear buds come in different sizes. Choose the size that suits your ears best so that they fit comfortably in your ears and provide effective noise cancelling of ambient sounds. For cleaning, pop the silicone tip off and soak them in lukewarm water with soap. After soaking, use a cotton swab to give them a better cleaning. Rinse the tips well under water and dry with a cloth. Do not put them back on the earbuds until they are completely dry.
RESET
- Delete the “Urbanista London” from the Bluetooth settings on your device.
- Press and hold the Urbanista reset button (2) for 10 seconds, whilst the earbuds remain inside the case, until the 4 battery status indicator lights (3) flash at same time (make sure that the charging case has enough power). Close the charging case, the reset is now successfully completed.
- Follow the instructions in section 1 “First Time Pairing” to reconnect the earphones to your device.
ONE YEAR LIMITED WARRANTY
This limited replacement warranty does not apply in cases of abuse or misuse of the product, use contrary to the Urbanista instructions, ordinary wear and tear, incorrect connection, force majeure or unauthorized repair. This warranty gives you specific legal rights, and you may have other rights, which vary from country to country. This warranty does not restrict the rights of the consumer mandated under applicable laws.
IMPORTANT SAFETY INSTRUCTIONS
Read all the instructions before using the product.
- To avoid accidental ingestion, keep the earbuds away from small children and pets. The earbuds contain a lithium-ion battery and may be hazardous if swallowed. If ingested, seek immediate medical attention.
- Do NOT use the earbuds at a high volume for any extended period.
- To avoid hearing damage, use your earbuds at a comfortable, moderate volume level. Turn the volume down on your device before placing the earbuds in/on your ears, then turn the volume up gradually until you reach a comfortable listening level. Long-term exposure to loud music or sounds may cause hearing damage. It is best to avoid high volume levels when using these headphones, especially for extended periods.
- Do not use these headphones when operating a motor vehicle, a bicycle, machinery or where your inability to hear outside sounds may present a danger to you or to others.
- Using these headphones limits your ability to hear noises around you, regardless of listening volume. Please be cautious when using these headphones.
- Use caution and follow applicable laws regarding mobile phone and headphone use if using the earbuds for phone calls while driving. Some jurisdictions impose specific limitations, such as single earpiece configuration, on the use of such products while driving.
- Do not drop, sit on, insert or allow the earphones to be immersed in water.
- Use of a power supply or charger not recommended or sold by power pack manufacturer may result in a risk of fire or injury to persons.
- Do not use the charging case in excess of its output rating.
- Use this product only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC).
- Do not use a charging case that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury to persons.
- Do not disassemble the charging case. Incorrect reassembly may result in ris of fire or injury to persons.
- Do not open, crush, or expose a charging case to fire, or excessive temperature. Exposure to fire or temperature above 212° F, 100° C may cause explosion.
- Have servicing performed by a qualified repair person using only identical replacement parts.
- This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.
- Do NOT make unauthorized alterations to this product.
For any questions or concerns contact: support@urbanista.com
REGULATORY COMPLIANCE
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro- vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by Urbanista AB could void the user’s authority to operate this equipment.
This device complies with part 15 of the FCC Rules and with Industry Canada license-ex-empt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
REFRENCE LINK
