Turtle Beach Velocity One Flight Quick Start Guide
IMPORTANT: READ BEFORE USING
ANY QUESTIONS? TURTLEBEACH.COM/SUPPORT
CONTENTS
COMMANDES
Align the throttle quadrant to the yoke base and slide into place until the units click. Press the release button if you want to remove.
HARDWARE SETUP
Lift the lid to reveal the clamp tool. Loosen the screws to extend the clamps. Place the Yoke base onto your surface, then tighten the screws to secure the controller.
CABLE CONNECTIONS
The controller must be set to the right mode for Xbox or Windows use. Connect the controller to your device, then using the FMD buttons navigate to Main Menu > Input Mode, and select the platform you are using. Press the Select button next to the FMD to set your input mode 
Connect a 3.5 mm headset for use on Xbox and PC
HARDWARE SETUP
For scenarios where the desk clamp can’t be used, peel and apply the micro suction tape to the highlighted areas and press firmly onto your surface
Pull the throttle quadrant lever handles to remove. Push your preferred ones onto the levers until they click.
XBOX NAVIGATION
You can navigate your Xbox system using the controls on the Yoke.
The Flight Management Display (FMD) allows you to configure your system on the fly. It has dedicated navigation buttons.
The FMD will default to the home screen. Use the Menu up/down buttons to access the main menu. Press Select to access a feature or press Back to return to the home screen.
FMD – PROFILE
Choose the profile that you want to be active in Microsoft Flight Simulator. Your active profile will appear on the Home screen
Check the input and remind yourself of the control assignment of the current active profile.
FMD – CHRONOMETER
Shows flight time data from Microsoft Flight Simulator. Alternatively, set to Manual mode via the settings screen to manually set flight time information.
Use up/down to select the local time and press select. Use up/down to set the hour then press select to accept and repeat for minutes. Use up/down to select the timer function. Press select to start and pause the timer. Press back to reset the timer.
FMD – SETTINGS
Configure different options, including LED color, LED brightness, SIP Mode, SIP Brightness, FMD Brightness, Chronometer Mode
The Status Indicator Panel (SIP) reacts to real-time events in Microsoft Flight Simulator. The SIP inserts are held in place via magnets and can be easily removed and replaced. Once you have added your preferred insert, go to the Settings section on the FMD and select the corresponding SIP Mode option to make sure the status alerts match
DECAL SHEET
Peel off a label and apply directly to the quadrant buttons or SIP insert.
Not seeing what you’re looking for here? Visit turtlebeach.com/support
CUSTOM PROFILE ASSIGNMENTS
Please visit the following URL for a complete copy of the Declaration of Conformity: http://www.turtlebeach.com/homologation
This symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product. Voyetra Turtle Beach Inc. is obligated as a producer with a main activity of selling under The Producer Responsibility Obligations (Packaging Waste) Regulations 2007. To fulfil our obligation we are registered with Comply Direct and their Recycling Room. Here you will find advice and information on packaging waste management, recycling symbols and the waste hierarchy principles of reduce, reuse and recycle.
https://www.complydirect.com/the-recycling-room/
DOWNLOAD PDF LINK
